Quote:
Originally Posted by cheng076
Mike H
HH torches are designed to work on tank pressure. There was some discussion re HH and regulators on here a week or so ago. The conclusion was that a minimum of 60 PSI was needed to run a HH reliably but that a few people had managed to get/keep one running as low as 45psi.
|
Yes, I know what the pressure needs to be but, what I mean't was that they should be regulated down to just above their working pressure so that the hose does not have all of that pressure on it, which is above 200 psi. IIRC.
I have seen that setup before at a studio and when I asked if they ever turned off the valve on the tank they said why? I left.