View Single Post
  #2  
Old 2014-06-28, 5:46am
beadnsprite beadnsprite is offline
Beadnsprite
 
Join Date: Nov 30, 2010
Location: Halifax, NS
Posts: 21
Default

A paper clip works to hold the bead. You need to bend the inner end up and poke through the back of your bottom cover. If the bead shifts, then use a little putty in the bottom hole. As for glare, shooting through the light tent would diffuse the glare. Make sure all other light sources are off, maybe. Good luck.
Reply With Quote