Quote:
Originally Posted by Dragonharper
You seal off the end of a piece of boro tubing, that is just a little bigger than the rod you are going to encase.
|
I do this a little differently - YMMV, this is just how I do it:
I don't seal the end of the tube, I leave both ends open and insert the rod into the tubing, leaving some sticking out. I seal the tubing to the rod at that end and work down the tube... with convenient handles on either side to hold, making it easy to pull down once I have sealed everything together. I usually just do a few inches of rod at a time, which this method suits very well I think.
Mad photoshop skillz right?