Wait, eleven different plumbers cannot figure out how to change from a 1/8" npt-1/4" barb fitting to a 1/8" npt- 1/4" flare fitting?
Seriously? Just unscrew it. The problem is they don't know because it isn't an appliance.
Can they run a gas line with a shut off valve and just CAP IT?
After looking thru the International Residential Code you can use copper (K or L) tubing and flare fittings to connect gas "appliances", this isn't rocket science!
Check out the other gas thread, and show them the picture with the valve and fire suppressor and see if they can do that
__________________
David To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|