http://www.lampworketc.com/forums/up...p?viewid=66815
hers a tut i put together
1. make a normal round bead
2. put a blob of glass where you want the tail, evenly heat
3. gently mash the whole thing, but not to thin
4. add 2 (or more, depending on the fish) blobs where u want the back fins to be; also add a blob for the fins in the front side (normally 1 on each side)
5. gently smash each fin with tweezers; u can angle them while ur smooshing them
6. add clear blobs for eyes and a black blob on top for the pupal