Lampwork Etc.
 
AKDesign

LE Live Chat

Enter Live Chat

No users in chat


Jelveh Designs - Glass Beads Torched One-by-One

Caber Light


 

Go Back   Lampwork Etc. > Library > Safety

Safety -- Make sure you are safe!

Reply
 
Thread Tools
  #1  
Old 2013-09-14, 8:56pm
eigna19 eigna19 is offline
Junior Member
 
Join Date: Jul 07, 2013
Posts: 6
Default ventilation and air exchange

Do I need the same size fan for my air exchange that I have for my ventilation? I think i am going to get this fan for my ventilation... 6" S600 Centrifugal Inline Fan 269 CFM 6 Do I need to get two of them?
Reply With Quote
  #2  
Old 2013-09-14, 9:20pm
houptdavid's Avatar
houptdavid houptdavid is offline
honorary bead lady
 
Join Date: Jan 14, 2008
Location: Mostly the doghouse
Posts: 5,180
Default

For? You do not need to blow air in
__________________
David
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Reply With Quote
  #3  
Old 2013-09-14, 9:25pm
eigna19 eigna19 is offline
Junior Member
 
Join Date: Jul 07, 2013
Posts: 6
Default

Oh, Just an open air duct, no fan huh. Here I thought I was going to be blowing cold air in, lol. Thank you
Reply With Quote
  #4  
Old 2013-09-14, 9:34pm
houptdavid's Avatar
houptdavid houptdavid is offline
honorary bead lady
 
Join Date: Jan 14, 2008
Location: Mostly the doghouse
Posts: 5,180
Default

But that fan is too small
__________________
David
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Reply With Quote
  #5  
Old 2013-09-15, 7:10am
Dale M.'s Avatar
Dale M. Dale M. is offline
Gentleman of Leisure
 
Join Date: Jun 10, 2005
Location: A Little Bit West of Yosemite Valley
Posts: 5,200
Default

Fan is to small... Minimum 500cfm... Also best to calculate fan size by measuring "face opening" of hood and calculating fan size by what opening of hood size is and what size duct you are using to move exhaust air...And nature abhors a vacuum.... As your exhaust fan draws air out of hood (over torch), it causes a slight low pressure or vacuum... Nature will try to fill that vacuum by pushing fresh air into area, thusly trying to fill low pressure and causing the clean makeup air flow you desire...

Dale
__________________
You can lead a person to knowledge, but you can't make them think.

To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Vendor-Artist-Studio-Teacher Registry

To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
San Francisco - A Few Toys Short of a Happy Meal

Last edited by Dale M.; 2013-09-15 at 7:13am.
Reply With Quote
  #6  
Old 2013-09-15, 2:22pm
eigna19 eigna19 is offline
Junior Member
 
Join Date: Jul 07, 2013
Posts: 6
Default

Dale,
I was going to go with this vent set-up http://www.andreaguarino.com/VENTILATION.html where would I put the make up air duct? Behind me, or above me?
Reply With Quote
  #7  
Old 2013-09-23, 4:45pm
Mary K's Avatar
Mary K Mary K is offline
Flamewoman
 
Join Date: Jan 12, 2007
Location: California
Posts: 985
Default

I have often wondered what your take on this system would be Dale. I know a lot of people go with this, but for the life of me, I just don't see how this can work, as efficiently as a hood, there just has to be no control in collecting the nox to evacuate it. After seeing those pictures taken with special equiptment that could photo the gasses released from a torch while it was running in the Glassline article years ago, much less what happens when glass is manipulated melting and spewing gasses in the torch flame, for me, I just would not feel safe with that.
__________________
Mary K
GTT Sidewinder & 3 Regalias

To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.

You cannot do a kindness too soon, for you never
know how soon it will be too late.


To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
PLEASE like my page!
Reply With Quote
  #8  
Old 2013-09-24, 7:18pm
Dale M.'s Avatar
Dale M. Dale M. is offline
Gentleman of Leisure
 
Join Date: Jun 10, 2005
Location: A Little Bit West of Yosemite Valley
Posts: 5,200
Default

It relies on pure velocity and air flow (volume) to capture ...

Dale
__________________
You can lead a person to knowledge, but you can't make them think.

To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Vendor-Artist-Studio-Teacher Registry

To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
San Francisco - A Few Toys Short of a Happy Meal
Reply With Quote
  #9  
Old 2013-09-24, 9:15pm
LarryC LarryC is offline
Senior Member
 
Join Date: Mar 07, 2011
Location: Northern California
Posts: 2,023
Default

Quote:
Originally Posted by Mary K View Post
I have often wondered what your take on this system would be Dale. I know a lot of people go with this, but for the life of me, I just don't see how this can work, as efficiently as a hood, there just has to be no control in collecting the nox to evacuate it. After seeing those pictures taken with special equiptment that could photo the gasses released from a torch while it was running in the Glassline article years ago, much less what happens when glass is manipulated melting and spewing gasses in the torch flame, for me, I just would not feel safe with that.

If they are designed correctly they can work very well. The downside is that the effective capture area is small so they can be restrictive to work under. I used a good one for years before moving to my current space which has a 8 ft by 5 ft hood.
Reply With Quote
  #10  
Old 2013-09-27, 1:12pm
szglassy's Avatar
szglassy szglassy is offline
szglassy
 
Join Date: Dec 20, 2007
Location: Palm Coast,Florida
Posts: 253
Default

I would be interested in reading that Glassline article. Do you remember what issue?
Reply With Quote
Reply

Tags
air exchange, fan, ventilation


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump




All times are GMT -7. The time now is 6:11am.


Powered by vBulletin® Version 3.7.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Your IP: 3.237.91.98