|
Safety -- Make sure you are safe! |
2012-08-08, 9:21pm
|
Senior Member
|
|
Join Date: Aug 08, 2007
Location: coquitlam BC Canada
Posts: 1,501
|
|
sealing ventilation system
My sheet metal guy wants to use silicone to seal my vent system...this
doesn't sound right,I say foil tape.Who is right.lol.also is 4inch pipe big enough
for my exhaust?I used 8inch before with inline fan,Witt Simmons designed
ventilation.My studio is 8x8.
Thanks so much
Karen
Volkano Exotik
ripzz
|
2012-08-08, 11:24pm
|
Senior Member
|
|
Join Date: Mar 07, 2011
Location: Northern California
Posts: 2,023
|
|
I have 10 inch ducts and the joints are sealed with foil tape. Dont know if its proper but it works well.
|
2012-08-09, 1:32am
|
Alaska Boro
|
|
Join Date: Dec 10, 2009
Location: Anchorage, Alaska
Posts: 1,065
|
|
Four inch IMO is too small. Consider at least a 7 to 10 inch depending on fan CFM. There is also a mastic that can be painted on the exterior joints for sealing that is used for forced air heating systems.
|
2012-08-09, 6:06am
|
|
Senior Member
|
|
Join Date: Aug 01, 2005
Posts: 2,159
|
|
I'd consider 8 inch pipe as a minimum. Silicone should work but metal foil tape is fine and easy to use (not messy either). I use foil tape. You aren't running a high pressure system so silicone inside might be overkill. Mastic might be a good choice for weathering and durability if you have outdoor joints.
Robert
__________________
Robert Simmons
(Former) Director for Bead Donations
Beads of Courage, Inc.
|
2012-08-09, 7:27am
|
|
Gentleman of Leisure
|
|
Join Date: Jun 10, 2005
Location: A Little Bit West of Yosemite Valley
Posts: 5,200
|
|
Yep 4 inch is way to small, 6 to 8 inch would be lot better....
It's all about duct velocity, CFM (volume) and noise.....
Silicone should not be a problem, foil tape is ok too....
Dale
__________________
You can lead a person to knowledge, but you can't make them think. To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Vendor-Artist-Studio-Teacher Registry To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
San Francisco - A Few Toys Short of a Happy Meal
|
2012-08-09, 10:23am
|
|
Curmudgeon Engineering
|
|
Join Date: Feb 15, 2006
Location: Near Seattle, WA
Posts: 1,723
|
|
Agree with all above. And will add that later if you want or need to make changes then silicone is messy to install and a PITA to remove and clean up the joints.
|
2012-08-09, 10:28am
|
Senior Member
|
|
Join Date: Aug 08, 2007
Location: coquitlam BC Canada
Posts: 1,501
|
|
Thanks so much for your replys.i should mention there is silicone on the inside seams
of the funnel,kinda worried about that.
What CFM should I be using with the 6 or 8 inch pipe {36 inch length with 2 11 inch
elbows.
Thanks again for your help I appreciate it so much...so will Mr V and Metal man.lol
Karen
Volkano Exotik
ripzz
|
2012-08-09, 8:30pm
|
|
Gentleman of Leisure
|
|
Join Date: Jun 10, 2005
Location: A Little Bit West of Yosemite Valley
Posts: 5,200
|
|
Face opening of hood, duct diameter, and number of turns is all inter reactive so most dimensions and specs have to worked out in formulas...
Duct to small will be noisy and rubble and make noise.... Ducts to big will move air to slow and the hazardous (toxic) heavy metals used as colorants in glass will drop out of suspension (air flow) and creating a pile (microscopic) of contaminates in bottom of duct... Any time they are disturbed, they become a health hazard...
Getting ventilation correct is a science and you have to work out the values... After that its just assembly of "parts".... But the formulas determine the "size" of the parts...
http://www.artglassanswers.com/forum...php?f=12&t=273
Dale
__________________
You can lead a person to knowledge, but you can't make them think. To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Vendor-Artist-Studio-Teacher Registry To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
San Francisco - A Few Toys Short of a Happy Meal
|
2012-08-09, 9:39pm
|
Senior Member
|
|
Join Date: Aug 08, 2007
Location: coquitlam BC Canada
Posts: 1,501
|
|
Great info Dale.I understand the why's of the formula now.
Time to apply.
Thanks so much.
Karen
Volkano Exotik
ripzz
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 2:04am.
|