Lampwork Etc.
 
Mountain Glass Arts

LE Live Chat

Enter Live Chat

No users in chat


The Flow




 

Go Back   Lampwork Etc. > Library > Tips, Techniques, and Questions

Tips, Techniques, and Questions -- Technical questions or tips

Reply
 
Thread Tools
  #1  
Old 2018-05-14, 8:25am
jsknow4445 jsknow4445 is offline
Junior Member
 
Join Date: Dec 28, 2015
Posts: 16
Default Rod Heaters

I have encountered some colors both 90 and 104 that just seem to shatter no matter how careful and slowly I enter the flame. Pre-heating rods are a way to solve this problem? The heaters are not cheap - are they considered necessary equipment by most beadmakers?

Just curious how hot do the rods need to be to make a difference - would laying them on warming tray or something similar be helpful at all?

Thanks June
Reply With Quote
  #2  
Old 2018-05-14, 8:49am
Eileen's Avatar
Eileen Eileen is offline
Loving learning
 
Join Date: Oct 11, 2010
Location: Florida
Posts: 11,009
Default

Not all have them by any means, but some do have one thing or another to warm the ends. Put it this way, it won't make it more shocky, and may help, so if you have anything (coffee warmer, beauty tool warming oven, whatever) give it a try and see if you like it. I have heard that some people stick the rods either on the top of their kiln, or put the end in the kiln.
Just remember that whatever is at that end may be hot when you are picking it up!

If you don't have anything like that, do warm the end of the rod further out in the flame at first, then bring it closer (especially if it is a color you know is apt to shock and spit glass at you.)
__________________
My current "hot" fantasy involves a senior discount on glass & tools!
Reply With Quote
  #3  
Old 2018-05-14, 9:03am
5betsy 5betsy is offline
Senior Member
 
Join Date: Apr 17, 2009
Location: Olympia!
Posts: 323
Default

I've been considering an electric griddle for this purpose. In the kiln door is really awkward for me and kiln top is not hot enough.
Reply With Quote
  #4  
Old 2018-05-14, 11:04am
jsknow4445 jsknow4445 is offline
Junior Member
 
Join Date: Dec 28, 2015
Posts: 16
Default

I was also thinking about a crock pot full of vermiculite on high - stick the rods in and they should be at least half covered. Would probably need to wipe them off before using them. I have an extra crock pot so won't cost much to try it.
Reply With Quote
  #5  
Old 2018-05-15, 3:37pm
RenaInTN RenaInTN is offline
Neophyte
 
Join Date: Sep 07, 2015
Location: East Tennessee
Posts: 11
Default

I have one of the rod warmers (gifted from a friend) and it does make easy work of shocky glass IMHO. I have used vermiculite in a crock pot to keep beads warm before I had a kiln (or when I only have time for a few beads)... It could probably work as a pre-warmer, but would probably have some 'dust' residue on the glass.
One other comment... in pre-warming the glass, it seems to take less time to get it to melt.
Reply With Quote
  #6  
Old 2018-05-15, 9:42pm
Speedslug's Avatar
Speedslug Speedslug is offline
Phill
 
Join Date: Mar 21, 2009
Location: Winnebago, MN
Posts: 1,877
Default

I see a lot of the Italian Masters with big racks at the end of their torch flame warming the tips of the rods they want to use.
It's that very last inch or three of the flame.
__________________
So, What Do We Do Now? We continue to try to make a difference when and where we can. Because that's what we do.
Reply With Quote
  #7  
Old 2018-05-17, 12:53pm
28676bhe 28676bhe is offline
Senior Member
 
Join Date: Apr 08, 2011
Location: NC
Posts: 1,686
Default

I run into rods that have an air bubble all the way down, and there is nothing that I can do to get rid of it. Sometimes, I collapse the rod by reannealing it at about 20 degrees above the temp suggested for that brand. Yes, it flattens it out a bit, but it does help!
__________________

To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.

Barbara
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump




All times are GMT -7. The time now is 5:44am.


Powered by vBulletin® Version 3.7.5
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Your IP: 54.196.110.222