|
Tips, Techniques, and Questions -- Technical questions or tips |
2013-04-07, 2:38pm
|
|
Senior Moment
|
|
Join Date: Jun 16, 2012
Location: New Yawk
Posts: 4,161
|
|
How to press ripple beads properly
Hi folks:
I'm having a bit of a prob with my ripple beads. Specifically, when I press them I lose the depth. As you can see below, the edges, which were compressed, not pressed, have nice depth. But the middle is totally flat.
Are my ripples not deep enough? Should I encase them thicker? What am I doing wrong?
Thanx,
Alli
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
I never finish anything. I have a black belt in partial arts.
|
2013-04-07, 3:04pm
|
|
Senior Member
|
|
Join Date: Aug 02, 2007
Location: Nahant Ma
Posts: 1,901
|
|
I cant help you Alli, but that is a nice bead.
Bob
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
e-mail: To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2013-04-07, 3:13pm
|
|
Tweedle Dumb
|
|
Join Date: Jan 16, 2009
Location: Dolphins are just gay sharks.
Posts: 1,934
|
|
More clear would be my first plan of attack.
__________________
Jamie Lynne (aka Bitty) To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. <Click For My Latest Murrini!
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. <Click! For Pandora Style Beads!
|
2013-04-07, 3:25pm
|
|
Jacqueline Parkes
|
|
Join Date: Nov 04, 2005
Location: Vancouver, Canada
Posts: 4,497
|
|
I find it only works for me if I am making thicker beads with a thicker encasement.
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2013-04-07, 3:30pm
|
|
Senior Moment
|
|
Join Date: Jun 16, 2012
Location: New Yawk
Posts: 4,161
|
|
Ok, thicker beads, thicker encasement. Will give that go tonite!
And thank you Bob
Thanx folks!
Alli
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
I never finish anything. I have a black belt in partial arts.
|
2013-04-08, 9:43pm
|
|
Pincel de Fuego
|
|
Join Date: May 18, 2010
Location: Panama city, Panama
Posts: 406
|
|
Idk, I think that bead is GORGEOUS!
__________________
Gabi
Pincel de Fuego
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. / To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. / To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2013-04-09, 4:03am
|
|
Senior Moment
|
|
Join Date: Jun 16, 2012
Location: New Yawk
Posts: 4,161
|
|
Thanx Gabi
I'm still doing something wrong tho. Doubled the layers of silver glass, then doubled the layers of clear, and the ripples are more smooshed than ever. So let me ask this; how cool do you let the cut glass get before you encase? Maybe I'm encasing it a bit too warm? It looks ok when first encased tho.
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
I never finish anything. I have a black belt in partial arts.
|
2013-04-09, 4:39am
|
|
Ezzy
|
|
Join Date: Sep 14, 2006
Posts: 2,020
|
|
I'm not sure what a ripple bead is; because of the reference to cutting the glass. When I looked at your picture I thought you meant a tornado bead. I'm not sure what I'd do to get more depth in a ripple since I'm not sure what it is.
__________________
When you wish upon a falling star, your dreams can come true. Unless it's really a meteorite hurtling to the Earth which will destroy all life. Then you're pretty much hosed no matter what you wish for. Unless it's death by meteor.
|
2013-04-09, 5:54am
|
|
Senior Moment
|
|
Join Date: Jun 16, 2012
Location: New Yawk
Posts: 4,161
|
|
Wasn't sure what to call them; went with ripple because of this thread: http://lampworketc.com/forums/showth...ghlight=ripple
If you look at Elizabeth Bead's signature style or Joe's (AvenueBead) focal in that thread, that is the effect I'm not succeeding at. I can get the side ripples, but the front ones always smoosh down, and there is no depth to the cuts.
The technique is also in GemsinBloom's tutorials, but doesn't mention a name or how to keep the depth in the cuts either.
HTH!
Alli
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
I never finish anything. I have a black belt in partial arts.
|
2013-04-09, 6:03am
|
|
Pincel de Fuego
|
|
Join Date: May 18, 2010
Location: Panama city, Panama
Posts: 406
|
|
I'm not sure what you mean either. Are you trying to get the bead to have colored ripples inside by encasing? I would suggest to add the clear on in separated ridges and let them melt in, that would make your colored edges rise, if you just keep adding clear in layers nothing will happen with your ripples? Does this make any sense? Is this what you're trying to do?
__________________
Gabi
Pincel de Fuego
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. / To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. / To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2013-04-09, 6:19am
|
|
Jacqueline Parkes
|
|
Join Date: Nov 04, 2005
Location: Vancouver, Canada
Posts: 4,497
|
|
Maybe you are pressing when the bead is too hot.
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2013-04-09, 8:57am
|
|
Ezzy
|
|
Join Date: Sep 14, 2006
Posts: 2,020
|
|
Ahh, the person who taught me that technique calls is a Baleen. I've seen others calling it a ripple and it's certainly not the tornado I thought you were trying to describe. They can be just as lovely unpressed.
__________________
When you wish upon a falling star, your dreams can come true. Unless it's really a meteorite hurtling to the Earth which will destroy all life. Then you're pretty much hosed no matter what you wish for. Unless it's death by meteor.
|
2013-04-09, 11:44am
|
|
Slogan Challenged...
|
|
Join Date: Mar 21, 2009
Location: Maricopa, Arizona
Posts: 6,275
|
|
I don't think you need to double your base glass of silver, just the encasement. You would be trying to press the clear into shape but the core which is cooler stays intact? Still a gorgeous bead but mess with it if you want to....
__________________
Kristin ~
Facebook: To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Etsy: To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2013-04-10, 8:28am
|
|
Senior Member
|
|
Join Date: May 21, 2006
Location: Cincinnati
Posts: 2,807
|
|
Agreed on the too hot assessment.
Same thing happens with encased florals. You have to press in stages. Deep heat, let he outside firm up, press a little - repeat.
When it's really hot and you press all at once, the middle gets thinned out and distorted more.
__________________
Lynda
Cheetah, 5 lpm and 7lpm conc/generator (8-9 psi), natural gas (booster), started 11/06
"The time you enjoy wasting is not wasted time." -- Bertrand Russell
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 9:00am.
|