Yes propane is a acceptable fuel for the HH....
Actually the temperatures are about the same.... Where the heat develops in the flame is different.... Your "sweet spot" will move when you go from MAPP to propane... Generally it will be a little bit further out in propane flame.
You can get a hose and use BULK MAPP gas or other "brazing/cutting" fuels. They are generally available at welding suppliers.... In most cases you will have to purchase the tank from welding supply, after that you can just "exchange" tank or they will refill it for you....
Its against federal gas codes to put "cutting fuels" into a propane tank....
Dale
__________________
You can lead a person to knowledge, but you can't make them think. To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Vendor-Artist-Studio-Teacher Registry To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
San Francisco - A Few Toys Short of a Happy Meal
|