|
Boro Room -- For Boro-related tips, techniques, and questions. |
2009-08-12, 11:31am
|
Senior Member
|
|
Join Date: Oct 12, 2008
Location: Rockwall Texas
Posts: 141
|
|
Rick, i will try your method . ty
__________________
Gregory
Nortel Mega Minor on 2 oxy cons.
I work slow but unsteady.
|
2015-03-09, 9:53am
|
Junior Member
|
|
Join Date: Feb 17, 2015
Posts: 3
|
|
using molds for drawer pulls
I guess it's coping out to use the molds sold for making pulls, but we are building a new house and I needed to make 33 for the kitchen alone. I did buy some 8/32 coupling nuts on the web. I bought stainless steel. you can also find 8/32 rods for your mandrels. These can be found at Lowe's but are pricey. Just dip in bead release. I use thickened bead release to put in the hole of the nut. It dries fast. I use soft glass. I haven't had trouble annealing in the kiln 30 minutes at 930. I turn off the kiln and just let it cool all the way down. I do have to be careful keeping the shaft part heated so it doesn't crack when I put it in the kiln. This is from trial and error. I got pretty good after making 30 or so. Mine are very organic looking. I love glass interactions.
|
2015-03-09, 9:58am
|
|
GlassDocNC
|
|
Join Date: Aug 12, 2008
Location: Asheboro, NC
Posts: 946
|
|
Hi Becky, could you post pictures? Sounds interesting. Have you had any crack? I would have guessed that crashing the kiln from 930 might be risky even if you leave the door closed during the cool down period.
__________________
Marina B.
Take life with a grain of salt.....a slice of lime, and a shot of tequila.
|
2015-03-09, 1:00pm
|
|
Borovangelist
|
|
Join Date: Jan 26, 2007
Location: Auburn, MA
Posts: 3,002
|
|
I sell a tutorial if anyone's interested.
The short version is dip steel rods, make the collar of the drawer pull, kiln , make the piece you'll actually grip, join the two together, then epoxy in the insert later.
The tutorial goes into more detail and has pictures along with sourcing info
https://www.etsy.com/listing/5008965...-pull-tutorial
I meaning to try Kalera's way too, though. They're pretty.
__________________
-Tom
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. | To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. | To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2015-03-09, 2:24pm
|
Senior Member
|
|
Join Date: Mar 07, 2011
Location: Northern California
Posts: 2,023
|
|
Quote:
Originally Posted by Beckyhenley
I guess it's coping out to use the molds sold for making pulls, but we are building a new house and I needed to make 33 for the kitchen alone.
|
Dont know about copping out that just seems to be the smart way to do it.
|
2015-03-09, 2:31pm
|
Member
|
|
Join Date: Jan 27, 2010
Posts: 42
|
|
I have been able to use TAG BlackJack and North Star Onyx against the knob pull kit base without it cracking on me. Some of the other colors (particularly the transparent ones) seem to crackle a lot of the time, but so far I've had luck with those right up against the fitting..... Hope this is helpful and true not just for me!
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 6:02am.
|