New temp controller question
Hello everyone. Just got my first ever temperature controller hooked up and there is about a 40 degree range as it cycles during the soak time. As the relay(?) is turning the kiln on and off the temp varies by up to 40 degrees (sometimes more). Is that normal? So, at a 960 degree soak, the temp ranges from 940 to 980.
As it ramps down the range is closer to 20 degree differences between the on/off cycles.
I hope I explained this correctly. I'm a little confused with all the terminology.
Thanks, looking forward to finding out what is going on. I've been reading threads for hours, and my eyeballs hurt. lol
__________________
Just Jamie
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. < me in my younger days
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. < me now days
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. < me after a pomegranate rum slushie
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|