|
Tips, Techniques, and Questions -- Technical questions or tips |
2014-05-19, 1:06pm
|
|
Member
|
|
Join Date: Jun 17, 2012
Location: For now - Lviv
Posts: 65
|
|
CIM is too stiff and smoky
Hey everyone (oh gosh, I almost typed "everypony")
I have a question about CIM glass, that I couldn't find answered. Right now I have only two CIM colors - Leaky Pen and Soylent.
Leaky Pen, while it is GORGEOUS is very stiff - if it's not mind-blowingly glowing I can't apply it anywhere, and it cools off very wuickly. Are all the CIM glasses like this?
And another one - Soylent, a beutiful color, but it smokes evry time I use it. it becomes dirty and looks like it's dusty, and sometimes has these noticable black spills. I tried using it on almost the end of the flame, where ir barely heated - I got the same effect.
And now I'm about to purchase a kiln and want some glass along with that - and since Effetre has a very limited palette for my taste, I was drooling over CIM, but afraid to get it.
Any advice? Thank you in advance, that's a lot of text I rambled on.
|
2014-05-19, 1:16pm
|
|
sunscreen me baby
|
|
Join Date: Jun 05, 2005
Location: Exeter, NH
Posts: 17,496
|
|
No, not all CIM colors are stiff. What kind of torch are you using?
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. ~ To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2014-05-19, 1:26pm
|
|
Senior Moment
|
|
Join Date: Jun 16, 2012
Location: New Yawk
Posts: 4,161
|
|
I had issues with sooty glass when using propane canisters on my HotHead. I use MapPro (propylene) now and it's made a world of difference.
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
I never finish anything. I have a black belt in partial arts.
|
2014-05-19, 1:48pm
|
|
Shelarious
|
|
Join Date: Jul 18, 2007
Location: Cincinnati, OH
Posts: 1,953
|
|
Leaky Pen is a stiffer glass, yes, but Peace for example melts like butter.
__________________
~Shelley
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2014-05-19, 2:44pm
|
|
Slogan Challenged...
|
|
Join Date: Mar 21, 2009
Location: Maricopa, Arizona
Posts: 6,286
|
|
Transparents are usually stiffer than opaques. You'll find that true with all the brands. CIM has gorgeous colors, and generally easy to use.
__________________
Kristin ~
Facebook: To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Etsy: To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2014-05-19, 2:57pm
|
|
Member
|
|
Join Date: Jun 17, 2012
Location: For now - Lviv
Posts: 65
|
|
I use HotHead torch with propane gas, with a simple bbq tank. I don't think i can even get Mapp here.
|
2014-05-19, 5:12pm
|
|
Senior Moment
|
|
Join Date: Jun 16, 2012
Location: New Yawk
Posts: 4,161
|
|
Naw, there's no MAPP to be found anywhere for the most part (the company closed a while back). MapPro (propelyne) is a decent substitute though. And take a look in the "Need help!! Colors changing !" thread here in the Tips N techniques forum; she's also having similar issues with colors sooting up and there's a few suggestions in there
Alli
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
I never finish anything. I have a black belt in partial arts.
|
2014-05-19, 5:32pm
|
|
Member
|
|
Join Date: Jun 17, 2012
Location: For now - Lviv
Posts: 65
|
|
Thanks Alli, I'll check out that thread I hope I won
t need to switch gases though, my propane tank cost so much
|
2014-05-19, 7:19pm
|
|
Senior Moment
|
|
Join Date: Jun 16, 2012
Location: New Yawk
Posts: 4,161
|
|
Urk; I think propylene is even more expensive.
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
I never finish anything. I have a black belt in partial arts.
|
2014-05-19, 8:50pm
|
|
one day at a time
|
|
Join Date: Jun 27, 2005
Location: We are MOVING!!!
Posts: 8,319
|
|
Quote:
Originally Posted by allicat
Urk; I think propylene is even more expensive.
|
It is, a little bit. But it is SO much better than propane. It burns about 300 degrees hotter, it burns much cleaner, and you will be very happy with the results. I used my HH for 18 months before I changed to an oxy/propane set-up. Now it is 12 years later and I still love the HH. There are some beads that I make which I can't do with my oxy/propane torch.
__________________
You live in a world of money. Money means choices. No money, no choices. Welcome to reality.
Melody (Marlee Matlin) from Switched at Birth
|
2014-05-20, 2:46am
|
Naysayer
|
|
Join Date: Sep 22, 2009
Posts: 1,203
|
|
I used to use propane on my HH, for what it's worth. Not soylent as is wasn't out then, but for sure Leaky Pen. I would say if it's smoking it is dirty glass ?
|
2014-05-20, 6:11am
|
Senior Member
|
|
Join Date: Dec 31, 2009
Posts: 504
|
|
I work on an oxy-propane Minor Bench burner and have an oxygen concentrator. The last time my glass started getting dirty in the flame, it was because the oxycon was dying. You might not be getting enough oxygen into your flame mixture, or your torch needs cleaning out.
CiM colors are among my favorites, both for color and workability. Try their Gelly's Sty sometime, it's one of the very best opaque pinks out there!
|
2014-06-18, 8:12am
|
|
Member
|
|
Join Date: Jun 17, 2012
Location: For now - Lviv
Posts: 65
|
|
YAY! Guys, if anyone has the same problem with sooty Soylent - I found out what the problem was!
I gues you could say if I were a super hero my powers would be super-dumbiness. When I first started working on my HotHead it wouldn't start, unless I coated the reduction holes. Soylent got all murky when that option was on. Tosay I took the coating of holes away, the flame was finally ok and my Soylent is now PERFECT! Such a beautiful shade of green!
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 4:27am.
|