Bascially you want to form a fairly large gather on your base rod, let it skin over a little bit, then plunge the gather into the mold. If the ridges are not high enough, re-melt, and make your gather a little larger then before then plunge again. Hope this helps!
Be sure to COAT THE INSIDE OF THE OPTIC IN BEES WAX to maintain long life and prevent sticking I tacked on a little more info onto your post within the other forum.
Starleen
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
How to use Steinert Mold
I tacked on a little more info onto your post within the other forum.
