|
Studio -- Show us your studio setup |
2015-07-17, 9:04am
|
|
professional gimme fiver
|
|
Join Date: Feb 12, 2007
Location: Lancaster, PA
Posts: 1,207
|
|
Do you torch in winter?
About 2 years ago we built a single wall cabana up by our pool area that I snagged for my studio. It's been working out great! Windows with cross ventilation and a sliding glass door. For 6 months of the year I am able to torch, but for the other 6 months I simply cannot deal with the cold. I have arthritis and my hands can't cooperate. Plus it's bitter cold here in winter! (Pennsylvania).
My hubby and I were thinking of covering the walls and floor in plastic sheeting, dropping in a layer of fiberglass insulation and covering it with wood paneling (which is what is inside right now and looks nice). We are a little stuck with what to do with the floor. Rolled linoleum?
But the biggest issue we can't figure out, is how to deal with the frigid air that will come in from the window cross ventilation. I suggested getting a couple of portable baseboard heaters but he pointed out that I will still be blasted in the back by the cold air, which will quickly fill the studio.
How do you handle torching in the winter?
__________________
Alexis
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2015-07-17, 1:21pm
|
|
Loving learning
|
|
Join Date: Oct 11, 2010
Location: Florida
Posts: 11,654
|
|
I'm in FL so don't have the same weather at all, but I'm wondering if there is any way to put in duct work to bring the fresh air up right near the work table so it doesn't blow past you?
__________________
My current "hot" fantasy involves a senior discount on glass & tools!
|
2015-07-17, 2:01pm
|
|
Senior Member
|
|
Join Date: Sep 01, 2007
Location: Greenville, SC
Posts: 1,749
|
|
Quote:
Originally Posted by Eileen
I'm in FL so don't have the same weather at all, but I'm wondering if there is any way to put in duct work to bring the fresh air up right near the work table so it doesn't blow past you?
|
Yep. DH built my workspace so I have three make-up air vents coming in from the outside, 2 on the surface and one under it, with an enclosure around them. I can redirect the underneath one if it's too cold. I also have a 220 heater I run at my feet which really kicks out a lot of heat. Oh yeah. And a nice wool army blanket to put over my legs if I need it. We're not nearly as cold as PA, but I can work comfortably when it's 30-40 outside. A hat helps, too.
__________________
~Rachel
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2015-07-17, 7:56pm
|
|
Phill
|
|
Join Date: Mar 21, 2009
Location: Winnebago, MN
Posts: 2,489
|
|
I am up here in the frozen nort' so I understand cold.
My torch bench is actually in the house but I hated the idea of dumping all the house heat out the ventilation system so I placed the torch bench in front of a window and ran the ductwork through the wall to the out side for at least ten feet away from the window. That way the fumes going out will have a chance to disperse and not get sucked back into the window.
This way I can crack the window open in the depths of winter and it will allow in makeup air to replace the torch fumes with the vent fan on. I also have something called a "blast gate" that is as big as my ventilation duct work (10 inches) and I can close that when I don't have the vent fan running.
I only need to crack the window a quarter of and inch or less to get enough makeup air and not even that much most of the time.
A little bit of house heated air goes out the vent system and that comes past me keeping me comfortable and I also run a small space heater at my feet under the bench.
__________________
The Zombie Apocalypse is Upon Us.
|
2015-07-18, 8:38am
|
|
Borovangelist
|
|
Join Date: Jan 26, 2007
Location: Auburn, MA
Posts: 3,002
|
|
If you enclose your bench on 3 sides, you can run the makeup air through the bench via ducting. Have your ventilation pull out the back/top of the work space.
For heat, I use a ceiling mounted infrared heater over my bench. That heats me, not the air that I'm pulling out.
__________________
-Tom
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. | To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. | To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2015-07-19, 11:37pm
|
|
Dancing Moon Shadows
|
|
Join Date: Apr 02, 2009
Location: Lincoln, CA
Posts: 1,790
|
|
My Chili Pepper kiln sits about 2 ft from me and keeps the room fairly warm. I also have a heat dish space heater but I find that if I wear a quilted shirt over my reg clothes I'm fairly warm enough.
__________________
May your day be happy and productive!
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. [/b][/i][/font]
|
2015-08-02, 10:49am
|
|
Formerly "HillyBeads"
|
|
Join Date: Sep 21, 2005
Location: North shore of Lake Tahoe, CA
Posts: 319
|
|
I have always used a space heater by the back of my legs (I torch standing), and I got a tall quartz heater last year which works WAY better at keeping me warm than the little box heater with a fan did. I heated the shedio up in advance and worked until the temp got down to about 40, then my fingers didn't work well anymore. So I would go inside and warm my hands while the heat ran to get the space heated up again, and repeat, all day long during winter (I have to work since this is how I make my living).
We moved recently, and I have a new shedio space, so I set it up with makeup air ducting coming in under the bench. I just got it set up, so I don't know how it will perform during the winter. Fingers crossed! I do know that during the recent hot spell, the studio stayed just as hot after I ran the vent system as it had been before, so it seems to work to keep the heat in.
__________________
Laura
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2015-08-16, 10:13am
|
Senior Member
|
|
Join Date: Apr 17, 2009
Location: Back in Tucson for good
Posts: 354
|
|
I live in Western WA and my studio is a semi insulated room in one corner of a barn. I can torch pretty comfortably until the outside temps get to 30 or so. Which is not what PA deals with.
But in addition to some serious layering of clothing, I stand on a heating pad designed for warehouse workers. It helps a LOT.
|
2015-08-30, 6:27am
|
Junior Member
|
|
Join Date: Sep 28, 2014
Location: Suffolk County, Long Island, NY
Posts: 1
|
|
I'm just setting up my studio, but I got a really good pointer from my flameworking teacher. When you pick your space heater for under the work bench, make sure you get a radiant heater, (one where you see the glow). Radiant heat energy will travel straight to you so you'll feel it even if the air's circulating too much for the heater to warm the room.
|
2015-10-08, 7:44pm
|
|
dances with ideas...
|
|
Join Date: Sep 15, 2005
Location: A map dot in Montana
Posts: 2,356
|
|
I don't know how to put a link using this iPad, but I just bumped up an old thread in tips and tricks. "Tricks for working in the cold" or something like that. Lots of good info. Hope you find it useful.
__________________
Roberta
”If it makes you happy, then it’s a good thing.” ~ Terryd
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2015-10-28, 9:42am
|
Junior Member
|
|
Join Date: Oct 08, 2012
Posts: 3
|
|
I use the back porch which is unheated and warm it up with a space heater. I have my kiln next to my bench so it keeps me warm. I'm also in PA and I tend not to torch in Jan/Feb - it's just too cold even with 2 pairs of socks!
|
2015-11-01, 7:03am
|
|
ScrapSurfGlassPaddleSew
|
|
Join Date: Jan 22, 2012
Location: Upstate NY
Posts: 3,223
|
|
I'm in upstate NY, and deal with the same issues - last year most of January and February was sub-zero or single digits. Here's my studio build thread - there's detailed photos of how we insulated. http://www.lampworketc.com/forums/sh...d.php?t=220718
Besides good insulation, I have a propane space heater and, because the floors are uninsulated and 2 years ago I got chilblains from standing on the cold floor, I have a heated floor mat that I stand on.
Return air is from a very slightly - like less than an inch - opened window at the far end of the shed. By the time it reaches me it's gone past the space heater and the kiln, which sits on a rolling cart directly behind me. It has to be ungodly cold before I absolutely can't work out there (arthritic joints) and usually I'm not willing to make the trudge out there when it's THAT cold, so working conditions really aren't an issue.
__________________
Pat The journey is the reward To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. L-111
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2015-11-05, 9:58am
|
|
Formerly "HillyBeads"
|
|
Join Date: Sep 21, 2005
Location: North shore of Lake Tahoe, CA
Posts: 319
|
|
I have had a chance to test the new makeup air system coming up through the bench, and it works perfectly! The last couple of days have had lows in the teens, and highs in the low 30s, and it stays warm enough to work all day with just a quartz heater. Yay!
Now the issue is getting it warmed up early in the morning so I can make jewelry out there and get all my mess out of the living room. I bought a little box heater with a good fan and a timer so I could set it to turn on a couple of hours before I go out to work. I tested it out this morning in the house to make sure it works, and discovered it shuts off in 30 minutes after being started with the timer, and there is apparently no way to overide it. Aaaargh.
Anybody have a heater with a timer, that will stay ON, that they like? I guess I can just buy one of those outlet timer thingies, but I was trying to avoid extra parts.
__________________
Laura
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2015-11-06, 5:05am
|
|
Phill
|
|
Join Date: Mar 21, 2009
Location: Winnebago, MN
Posts: 2,489
|
|
Is it that the heater will only run for 30 minutes or that it got the room up to temp and then shut off?
Outlet light timers is one way once you have a heater that will go the distance for you.
But I will also add that those infra red heat lamps can make a world of difference as well.
I set one up over my shoulder while doing a brake job on my car last week and it not only warmed me up it also warmed up my tools and the break parts I was working on even with the garage door wide open.
You might look in the Good Will type stores for those Christmas light timers. They are pretty inexpensive these days.
__________________
The Zombie Apocalypse is Upon Us.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 2:34am.
|