|
Boro Room -- For Boro-related tips, techniques, and questions. |
2013-09-16, 2:48pm
|
|
Queen Bee
|
|
Join Date: Oct 26, 2008
Location: Ellington, CT
Posts: 1,253
|
|
Boro Shade 3 with Contact Lenses
I'm fairly new to boro, but have been making some beads lately. I wear contact lenses, and have philips boro glasses in shade 3. I noticed while torching today that some of the colors still hurt my eyes, especially when burning off the haze or melting in frit. I stopped torching, and my eyes were very bloodshot, especially around my iris where the contact lenses are. I took the lenses out right away, but it's been a couple of hours, and my eyes are still irritated.
Should I not wear contacts and get fit over frames? Or wear the contacts with a shade 5? I'm concerned I won't be able to see with a shade 5. What do you all think?
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. Donna
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. Vintage & Contemporary Beads, Findings, Chains, Trinity Brass, Vintaj, Bead Tubing, Bobbins
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. Handmade Artist Lampwork Jewelry
|
2013-09-16, 2:59pm
|
Junior Member
|
|
Join Date: Aug 13, 2013
Posts: 17
|
|
i probaly shouldnt try to answer this but i use rose didy's for boro, alot of people only use them because of the visublity and if you dont boil the glass it wont be too bright, i imagine your contacts may have dried out or they may be very sensitive to heat, i dont know anything about contacts so sorry.. i would also say it may be from a lack of minerals, your body needs 90 essentails and you only get about 50 from foods,,, idk! i would try glasses and if that doesnt work then..... idk!
|
2013-09-16, 3:27pm
|
|
Flamewoman
|
|
Join Date: Jan 12, 2007
Location: California
Posts: 985
|
|
Here is some information coppied from the Mountain Glass Arts site.
The new material, called ACE, short for "Amethyst Contrast Enhancer", utilizes rare earth oxides in the glass composition to achieve the unique color enhancing characteristics. ACE glass is very effective at blocking the bright sodium flare produced by working borosilicate as well as providing ultraviolet protection to 390 mm. It offers slightly better protection than the classic rose didymium lenses. However, ACE glass by itself is not sufficient enough to protect your eyes while working boro. While the bright sodium flare may seem to pose the greatest risk it only causes temporary discomfort from overexposure. It is the UV and infra-red wavelengths that will cause permanent eye damage. You may be surprised to learn it is the molten glass itself that produces these wavelengths. If you're going to go with a pair of the Phillips 202 glasses for boro you must add at least a shade 3 flip down for more complete UV & IR protection. Shade 5 is recommended.
Myself I could not wear contac lenses while working glass, eyes got too overheated, so I got prescription lenses from Aura lens. I got the split lens with ace on top and shade 5 on bottom, they were expensive but cheaper than taking chances with my eyes, I only have 2 and want them to be the best they can be. Unless you know where you can get new ones, I would do what ever is neccesary to protect your eyes.
__________________
Mary K
GTT Sidewinder & 3 Regalias
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
You cannot do a kindness too soon, for you never
know how soon it will be too late.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. PLEASE like my page!
|
2013-09-16, 4:58pm
|
|
Now part of the Dark Side
|
|
Join Date: Jul 02, 2010
Location: North Central PA
Posts: 966
|
|
For most of my boro work Iuse standatd ACE 202 clipons. When working with certian colors, cobalt, most adventurines, and most opaques, I have shade 3 flips ups. My glasses weigh a ton but I am unable to see the details when using shade 3's for everything. (I see the catarac surgeon tomorrow.) If I were having and issue with shade 3's not being dark enough I'd get a pair of shade 5 flip ups. My next pair od ACE202's will be prescription to cut down on the weight.
__________________
Roy
Hot glass does not crack.
Unless it is glowing and drippy, hot glass looks like cold glass.
|
2013-09-16, 5:26pm
|
Alaska Boro
|
|
Join Date: Dec 10, 2009
Location: Anchorage, Alaska
Posts: 1,065
|
|
Have success with glasses, welders shade 3 flip ups and a diddy shield from Blue Moon Glassworks. Also found shade 5 too dark for most boro related tasks.
|
2013-09-16, 6:28pm
|
|
Queen Bee
|
|
Join Date: Oct 26, 2008
Location: Ellington, CT
Posts: 1,253
|
|
So, in essence the philips shade 3 glasses should be sufficient for most boro work - which is what I have. Maybe it's the contact lenses that are the problem then?
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. Donna
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. Vintage & Contemporary Beads, Findings, Chains, Trinity Brass, Vintaj, Bead Tubing, Bobbins
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. Handmade Artist Lampwork Jewelry
|
2013-09-16, 9:24pm
|
|
Bliss Junkie
|
|
Join Date: Jun 24, 2007
Location: columbia, missouri
Posts: 357
|
|
could also be how you are sitting, you sitting close to the torch? maybe leaning in? sometimes i do and my eyes and contacts suffer for it
__________________
Shawn
Karma, it's everywhere your going to be...
GTT Cricket and Carlisle CC w/ a lot of tanked oxygen
|
2013-09-17, 3:18am
|
|
Now part of the Dark Side
|
|
Join Date: Jul 02, 2010
Location: North Central PA
Posts: 966
|
|
Quote:
Originally Posted by BeadBlossoms
So, in essence the philips shade 3 glasses should be sufficient for most boro work - which is what I have. Maybe it's the contact lenses that are the problem then?
|
It could be the contacts, it could also be your position, are you hunched over the torch, and/or inadiquate ventelation.
__________________
Roy
Hot glass does not crack.
Unless it is glowing and drippy, hot glass looks like cold glass.
|
2013-09-17, 4:12am
|
|
Senior Member
|
|
Join Date: Sep 01, 2007
Location: Greenville, SC
Posts: 1,749
|
|
Check with your doc about wearing contacts while torching. Mine told me not to, but I don't remember why.
__________________
~Rachel
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2013-09-17, 12:09pm
|
Senior Member
|
|
Join Date: Jun 16, 2009
Location: oregon
Posts: 149
|
|
I had a similar experience as you with flare with contacts and very light colored eyes. Switched to boro shade 5 for awhile but found it too dark and my eyes still got irritated with contacts. Now have multifocal lenses and found when I torch they were always going off center from dry eyes. Switched to bifocal glasses and fit overs shade 3 and am very, very happy with how I can see so much better with no eye irritation and not bothered by flare.
|
2013-09-18, 3:08pm
|
|
Queen Bee
|
|
Join Date: Oct 26, 2008
Location: Ellington, CT
Posts: 1,253
|
|
I have progressive lenses in my glasses, but trying to use them together is a bit dicey. I'll have to get some fit overs, sigh. It's only money. But thanks everyone for all the helpful suggestions. And yes, I do think I was leaning to close to the torch too.
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. Donna
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. Vintage & Contemporary Beads, Findings, Chains, Trinity Brass, Vintaj, Bead Tubing, Bobbins
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. Handmade Artist Lampwork Jewelry
|
2013-09-21, 7:03pm
|
|
Member
|
|
Join Date: Sep 23, 2007
Location: Oakley, CA
Posts: 88
|
|
I don't wear contacts but I was having eye/face irritation when I first started. Now I use shade 4 for making boro beads about 4 hours a day, as well as a Blast Shield mounted to my torch and have no more issues. The Blast Shield made a huge difference. My face doesn't even get hot any more.
Erin
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2013-09-30, 9:57pm
|
Senior Member
|
|
Join Date: Sep 13, 2012
Location: Albany, NY
Posts: 172
|
|
Just to give you a frame of reference all i use is a cheap pair of Didy glasses and my contacts never give me any problems. I generally go for about 2.5 hrs at a time. No matter what you end up doing however you have to make sure to consciously blink more when torching. I guarantee you will notice a big difference in how your eyes feel after your session.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 12:29am.
|