|
Tips, Techniques, and Questions -- Technical questions or tips |
2014-02-06, 6:48am
|
|
Growing Edge Glass
|
|
Join Date: Jul 05, 2008
Posts: 2,539
|
|
Chilli Pepper kiln, replacing fiber w/brick?
I've been searching LE's archived posts for one where someone mentioned replacing the fiber blanket on the floor of their Chilli Pepper kiln, with kiln brick.
No luck in finding it ... does anyone remember who did this or how?
I would imagine it is relatively simple .. remove the fiber floor and use kiln brick cut thinner. I was curious what thickness was used?
I'm also looking for mandrel rests for the chilli pepper any recommendations or links?
I found a few links for rests, in my searches, but all turned up dead/gone/kaput.
thanks for any input!
__________________
~Mikelene
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. -glass cabochons, clay pendants~~~ To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. -jewelry~~~ To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. ~~~ To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2014-02-06, 7:21am
|
|
I fart diamonds
|
|
Join Date: Jun 14, 2005
Location: Altamonte Springs, FL
Posts: 3,893
|
|
I've thought about it, but never done it. Mine works fine as is, so until it craps out, 'll leave it alone.
I made my own mandrel rest by cutting a piece of expanded metal to fit. It works awesome!
__________________
-Shawnette the original "everybody get a grip" girl
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2014-02-06, 7:23am
|
|
I fart diamonds
|
|
Join Date: Jun 14, 2005
Location: Altamonte Springs, FL
Posts: 3,893
|
|
Lol! Those are old pics. I can't remember the last time I made that many beads. Heck, I can't remember the last time I made beads!
__________________
-Shawnette the original "everybody get a grip" girl
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2014-02-06, 2:21pm
|
|
Member
|
|
Join Date: May 12, 2006
Location: Halifax Nova Scotia
Posts: 42
|
|
Try phoning JenKen directly. They are have always helped me out when I need helping
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2014-02-06, 8:07pm
|
|
Senior Member
|
|
Join Date: Feb 17, 2011
Location: Sandusky Ohio
Posts: 189
|
|
Ok Shawnette how do you keep your kiln so clean? Mine has pieces of bead release through out the floor.
__________________
My obsession is my passion and my passion will light the flame.
Jo Ann
Lanford BeadWorks
|
2014-02-06, 9:16pm
|
|
dances with ideas...
|
|
Join Date: Sep 15, 2005
Location: A map dot in Montana
Posts: 2,356
|
|
Maybe you could just lay a thin layer of brick over the fiber? What are you trying to achieve?
__________________
Roberta
”If it makes you happy, then it’s a good thing.” ~ Terryd
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2014-02-06, 10:05pm
|
|
Cheesehead Packer lover
|
|
Join Date: Jun 27, 2005
Location: Frozen Tundra
Posts: 652
|
|
I think brick will be too thick. I just phoned Jen Ken and they sent me more insulation for the back and sides. Call them, they are really helpful.
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. Cherie
Sisters Beads
If you can't be kind, at least have the decency to be vague
|
2014-02-06, 10:07pm
|
|
Glass-aholic
|
|
Join Date: Mar 21, 2007
Location: CT, tolland CT
Posts: 4,332
|
|
I just put thin brick right over the fiber. I only did 1/2 because I just needed a flat hard surface, but I centered it thinking that was best, and it does help keep the heat. If I were going to do it all I would just put a few more bricks next to it.
I don't use a rack in the kiln either. I just stack and pile if I'm weary about sticking beads I put them laid out then a few beads later I stack them to make more room.
__________________
Minor 10lpm Oxy-Con + HH on Propylene . . . . . .
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. . To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. hand dyed silk ribbons in many colors!
WASHERS & TOPPERS - layering components for interchangeable glass topper and to use in other jewelry/metalwork.:
|
2014-02-07, 9:04am
|
|
Growing Edge Glass
|
|
Join Date: Jul 05, 2008
Posts: 2,539
|
|
Thanks for all the responses and pics!
Shawnette, I love the expanded metal ... that might do it!
I wanted a hard surface on the bottom because I want to keep the kiln floor cleaner. I have bits of bead release and some spent charcoal on the fiber all the time and if I put a bead in too quickly, it sticks to all of that.
I think, more than anything, I want to be able to keep it cleaner and I like the idea of the rack inside to make sure my beads don't stick until the temp comes down. Then I typically restack to the sides. Cleaning the fiber is a pain in the tush, too! I've turned the kiln upside down, used a small vac ... very carefully.
I may do the 1/2 inch kiln brick, as you have Jaci, and a central mandrel rest to first rest beads on.
Thanks again for the responses!!
__________________
~Mikelene
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. -glass cabochons, clay pendants~~~ To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. -jewelry~~~ To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. ~~~ To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2014-02-07, 9:16am
|
|
Glass-aholic
|
|
Join Date: Mar 21, 2007
Location: CT, tolland CT
Posts: 4,332
|
|
We just take the shop vac to it every now and then... Never to carefully either ! Never had an issue, I use my brick as a warming stone for murnini and stuff more than anything. But I agree, the stone is easier to clean.
__________________
Minor 10lpm Oxy-Con + HH on Propylene . . . . . .
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. . To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. hand dyed silk ribbons in many colors!
WASHERS & TOPPERS - layering components for interchangeable glass topper and to use in other jewelry/metalwork.:
|
2014-02-07, 12:49pm
|
Junior Member
|
|
Join Date: Feb 04, 2013
Posts: 19
|
|
Hmmmm, wasn't someone talking about a week ago about using dollar store pizza stones as kiln furniture or something.
Would that work for this??
Patrick
|
2014-02-07, 2:10pm
|
|
Senior Member
|
|
Join Date: Aug 02, 2007
Location: Nahant Ma
Posts: 1,901
|
|
Yes Patrick that would work, cut to the size needed and lay it over the fiber.
Bob
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
e-mail: To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2014-02-07, 2:21pm
|
|
I fart diamonds
|
|
Join Date: Jun 14, 2005
Location: Altamonte Springs, FL
Posts: 3,893
|
|
If you just want something to use as a flat surface in the kiln, why not just use unglazed ceramic tiles? A couple of 4x4s would fit nicely.
__________________
-Shawnette the original "everybody get a grip" girl
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2014-02-08, 7:43am
|
|
Growing Edge Glass
|
|
Join Date: Jul 05, 2008
Posts: 2,539
|
|
Jaci ... same here, a smaller shop vac but if I get too close the fiber gets sucked up.
Patrick ... that would work as well ... thanks Bob, I do have some of those actually.
Shawnette .. smart cookie that you are, that would be perfect, and I have some of those as well.
thanks for the input!
__________________
~Mikelene
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. -glass cabochons, clay pendants~~~ To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. -jewelry~~~ To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. ~~~ To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2014-02-08, 12:33pm
|
Junior Member
|
|
Join Date: Feb 04, 2013
Posts: 19
|
|
Vacuuming
Mikelene, when doing the vacuuming, laying down a piece of the epanded metal first may take care of the fiber moving.
Patrick
|
2014-02-08, 12:34pm
|
Junior Member
|
|
Join Date: Feb 04, 2013
Posts: 19
|
|
expanded that is, the same stuff suggested for the mandrel holder
|
2014-02-08, 2:11pm
|
Alaska Boro
|
|
Join Date: Dec 10, 2009
Location: Anchorage, Alaska
Posts: 1,065
|
|
One could remove the fiber from the floor and replace with IFB (insulated fire brick). These come in both 2.5 and 3 inch thick bricks which can be cut with standard wood working tools. Perhaps cutting each brick so that it is only 1 inch thick could be an option. Temperature range from around 1800 F to 3000 F depending on selection.
|
2014-02-10, 5:43am
|
|
Growing Edge Glass
|
|
Join Date: Jul 05, 2008
Posts: 2,539
|
|
Great idea Patrick ... thank you!
Alaska ... that was also a thought that I had as any kiln brick on top of the fiber (even only 1/2" thick) limited the amount of room I have when placing the bead/mandrel through the door.
What I ended up doing was to lightly vac the kiln to remove all the "crunchy stuff" from the floor. Lost a bit of it here and there, wish I had thought of that expanded metal, Patrick!!
I cut two 1/4" ceramic tiles so that they would fit right on the fiber blanket. I pressed them down and sank them a bit so that the amount of clearance through bead door was even better than with just the blanket. I turned the ceramic upside down as they had a larger grid on the back which prevented the beads from rolling. Worked perfectly!!
Thanks for all the suggestions!!
__________________
~Mikelene
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. -glass cabochons, clay pendants~~~ To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. -jewelry~~~ To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. ~~~ To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 4:53am.
|