|
Safety -- Make sure you are safe! |
2006-02-24, 3:39pm
|
|
Pobody's nerfect!
|
|
Join Date: Jul 14, 2005
Location: nashville
Posts: 550
|
|
A scary lesson & safety reminder
So I admit it, I've gotten a little lax with some safety rules. I guess I put my oven mitt and safety goggles on top of my kiln when I walked out of the room to take a break from torching.. I didnt even realize I had put them there...
I started doing a bunch of other stuff in the house and noticed it seemed to be getting smokey. Ran upstairs to find smoke coming from the torch room.. it was FULL of smoke. the mitt is now a heap of smoking charcoal and my goggles are half melted. And the smoke is very very nasty. I see now why that stuff can kill you long before the fire ever does.
I was very lucky that it wasnt much worse. My exhaust fan is working overtime now, and I've got all the windows open in the house to dissipate it. I'm surprised the neighbors arent' wondering what the smoke is that's pouring out of the windows. And WHY didnt the SMOKE DETECTOR go off?
PLEASE PLEASE PLEASE DON'T EVER LEAVE YOUR KILN UNATTENDED!!!!!! Pay attention to what other things are around it!!!! CHECK YOUR SMOKE DETECTOR BATTERIES!!!!!
OMG, I have certainly learned a good lesson today.
And P.S. Mike, now I have a good reason to order some cool new glasses
__________________
Sherri
"While we have the gift of life, it seems to me the only tragedy is to allow part of us to die -- whether it is our spirit, our creativity or our glorious uniqueness” -- Gilda Radner
|
2006-02-24, 4:04pm
|
|
Eight Miles Wide
|
|
Join Date: Dec 18, 2005
Location: Kalamazoo
Posts: 4,424
|
|
HOLY COW. I'm glad you're ok.
__________________
melissa lynserra
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2006-02-24, 10:13pm
|
|
Facebook addict
|
|
Join Date: Oct 16, 2005
Location: Arizona
Posts: 1,858
|
|
OMG, a similar incident happened to me this week! I had an oven mitt on top of the kiln (while running, duh) and noticed a burning smell. Lo and behold, the mitt was *just* starting to burn!
__________________
~Teri
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Mini cc w/2, 5 lpm concentrators
|
2006-02-24, 10:19pm
|
|
Pobody's nerfect!
|
|
Join Date: Jul 14, 2005
Location: nashville
Posts: 550
|
|
LOL, well I'm glad I'm not the only one.....
I don't know why it surprised me that the oven mitt burned. I was thinking that it was actually the plastic safety glasses that started to melt, which in turn then started the mitt burning. Guess I was wrong...
You were lucky that you caught it early!!!!!
__________________
Sherri
"While we have the gift of life, it seems to me the only tragedy is to allow part of us to die -- whether it is our spirit, our creativity or our glorious uniqueness” -- Gilda Radner
|
2006-02-25, 12:15am
|
|
Aquarian Artist
|
|
Join Date: Aug 16, 2005
Location: Central Oregon
Posts: 265
|
|
Well, I am very happy that you (and your home) are ok. It's always a reality check when I read these threads! Thanks for sharing.
__________________
Vivian Houser
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. "I believe in God, only I spell it Nature" - Frank Lloyd Wright
|
2006-02-25, 7:13am
|
Senior Member
|
|
Join Date: Jun 10, 2005
Posts: 342
|
|
I glad to hear you are OK and your home is intact!
__________________
Charlene
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2006-02-27, 5:41am
|
|
Safety ALWAYS
|
|
Join Date: Jun 10, 2005
Location: Sauk Rapids, Minnesota
Posts: 2,401
|
|
If your smoke detector did not go off, first check the battery. If the battery is good, replace the smoke detector.
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Chaotic Glass: Safety for the glassworker, and random thoughts and opinions on the state of the glassworking world To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2006-04-02, 9:17am
|
|
Experimentalist
|
|
Join Date: Nov 15, 2005
Location: Penryn, California
Posts: 6,758
|
|
I don't have a kiln, but I didn't realize they get hot on the outside. Yikes!
Laura
|
2006-04-02, 11:05am
|
|
I'm a lilac!
|
|
Join Date: Jun 09, 2005
Location: Portland, Oregon
Posts: 8,793
|
|
Yes, kilns get VERY hot on the outside! I actually use mine to "reheat" my tea when it gets too cold.
The fact that they generate so much heat is why most kiln manufacturers recommend that your kiln be two feet or more from ANY flammable surface. Including walls and floor.
__________________
-Kalera
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. * To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2006-04-04, 7:27am
|
|
Senior Member
|
|
Join Date: Jan 16, 2006
Location: Vancouver Island
Posts: 377
|
|
Im glad you are ok. Thats kinda weird? I have a paragon and a coupla Aim kilns here, its been my experiance they get warm on the ouside, but not Hot. Definetly not hot enough to combust something. What kind of kiln do you have?
B
Have you tried the kevlar gloves? There awsome, you can take a piece out of the kiln @ 1050 and hold it in your hand to work on it, do touchups etc.
|
2006-04-04, 7:39am
|
|
odd lot addict
|
|
Join Date: Jun 12, 2005
Location: Kansas City, MO
Posts: 692
|
|
2 feet? Looks like I'll be moving my kiln this weekend . . .
__________________
Jen
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2006-04-04, 7:45am
|
|
Button Queen
|
|
Join Date: Jun 13, 2005
Location: Goshen, IN
Posts: 2,854
|
|
My kiln is sitting on concrete blocks, on top of the table. It's not 2 feet from the window (it's in front of a window), but we stand ceramic tiles up behind it. When it's running, the blinds are left all the way up, WAAYYYY out of range. And I still get nervous.....
__________________
Barbara Logan
|
2006-04-04, 8:24am
|
|
Safety ALWAYS
|
|
Join Date: Jun 10, 2005
Location: Sauk Rapids, Minnesota
Posts: 2,401
|
|
2 feet for very large kilns.
I recommend at least 6" for metal encased muffle type kilns (such as my RANA Bead Annealer or the Fuse Box from EK Miller [discontinued]).
The best way to tell if you have enough space is to use the hand test. When the kiln has been running for several hours, put your hand on the wall behind the kiln. If it is so hot you cannot keep your hand on it comfortably, the kiln is too close - back it up at least 12".
Use the same test for under the kiln - if you can't keep your hand on the table underneath the kiln, raise it up, or put non-flammable materials such as sheet metal or ceramic tiles under it.
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Chaotic Glass: Safety for the glassworker, and random thoughts and opinions on the state of the glassworking world To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2006-04-04, 8:26am
|
|
Safety ALWAYS
|
|
Join Date: Jun 10, 2005
Location: Sauk Rapids, Minnesota
Posts: 2,401
|
|
And check your power cords and outlets from time to time. The cord and wall plug or wall socket should not be warm, and NEVER hot.
If there is noticable heat in the cord, connector or wall socket, you may have wiring problems which could lead to a fire.
And of course: NEVER EVER use extension cords to run your kiln.
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Chaotic Glass: Safety for the glassworker, and random thoughts and opinions on the state of the glassworking world To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2006-04-04, 8:22pm
|
|
Senior Member
|
|
Join Date: Jun 11, 2005
Location: SUNNY FLORIDA~West Coast!
Posts: 9,423
|
|
Wow that is scary! Paula
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Still North America's Largest Lauscha Dealer!
Now reopened in South Florida!!
Like US on Facebook ! To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 7:15am.
|