|
Tips, Techniques, and Questions -- Technical questions or tips |
2007-11-17, 7:37am
|
|
Learning...
|
|
Join Date: Jun 01, 2007
Location: Connecticut
Posts: 182
|
|
Brass Rods/Mandrel 5mm
There may be mention of this question I have in here somewhere...but I'm not able to find anything. My question is this: I went to the welders the other day and bought a 5mm brass rod. That's all they had in that size and I actually can't remember what that comes to in inches. But anyway, they were clueless as to whether heat would transfer through this rod when being placed into a flame. Soooo...I actually have 2 questions for you "experienced" glass/flame/rod users out there. Is a 5mm rod/mandrel large enough for the Pandora/Troll etc. bead holes? And...will a copper rod burn the *&% out of my hand or will it be okay? If neither are in my favor, can anyone tell me exactly what I need to make a bead to fit these bracelets and where to get it? Thanks so much in advance! Teresa
|
2007-11-17, 9:42am
|
|
Gay rights R human rights
|
|
Join Date: May 06, 2006
Location: Squamish BC Canada
Posts: 2,719
|
|
it will burn the crap out of your hand....brass conducts heat.
__________________
Leslie
"Very funny, Scotty. Now beam down my clothes."
Remember kiddies..."WRAP IT BEFORE YOU NAP IT!!!!
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. bravo torch with 2 ex20's
|
2007-11-17, 10:28am
|
|
crabby...who me?
|
|
Join Date: Jun 18, 2005
Location: Palatine,a Chicago burb
Posts: 537
|
|
Teresa,copper or brass will conduct heat and burn your hand.Ive tried them both.
Jeff
__________________
You see it's like this.......I don't know.
Running a mega minor on three 5 lpm concentrators.
|
2007-11-17, 10:53am
|
|
Learning...
|
|
Join Date: Jun 01, 2007
Location: Connecticut
Posts: 182
|
|
well alrighty then...
Thanks for the replies! I WON'T be using this rod today or EVER! Think I'll call around to hardware stores before venturing out there and buring gas! Thanks again everyone!
|
2007-11-17, 11:26am
|
|
Learning...
|
|
Join Date: Jun 01, 2007
Location: Connecticut
Posts: 182
|
|
Wow...that is an excellent tip! I'm sure my husband could figure out a way to grind it into a few tools for me. I actually ended up having to buy 2 rods because it was sold by the pound.
|
2007-11-17, 1:06pm
|
|
Senior Member
|
|
Join Date: Jan 30, 2006
Location: Anchorage, Alaska
Posts: 411
|
|
I had a hard time with hardware stores, but scored at aircraft parts houses. They carry stainless steel hollow tubing in 1/8, 1/4, 3/8, 1/2 in. They usually sell it by the foot, and you can have it cut to whatever length you like. The cuts weren't clean so I had to do a bit of grinding/polishing when I got them home (didn't take much). They are perfect for blowpipes and BHBs.
Laura
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2007-11-17, 3:16pm
|
|
I need more boro stuff
|
|
Join Date: May 10, 2007
Location: Sydney, Australia
Posts: 1,672
|
|
Are you going to use pre-made rivet? If you are then you need 1/4" size mandrels.
If no pre-made rivets, then 5mm mandrels will do fine.
If you are going to make your own lining, you need the silver tube for lining minimum 4.3mm ID, because the screw bit on Pandora/Biagi is about 4.2mm. I'm not sure if you can find silver tube in US with 4.3mm ID and 5mm OD or not, but for us in Australia they discontinued this size of tube so we have to get 4.3mm ID and 6mm OD (which is too thick for my liking).
__________________
Yunita
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2007-11-17, 7:24pm
|
|
Learning...
|
|
Join Date: Jun 01, 2007
Location: Connecticut
Posts: 182
|
|
I'm not going to use rivits...not ready for that. Not even sure if I'll be able to handle a mandrel that thick! But I very much appreciate all the information you all have given to me regarding this venture. I want to visit Tin City tomorrow...hopefully I'll be able to find what I'm look for there? We shall see. Why did they discontinue that size tube? That's not fair!
|
2007-11-17, 9:11pm
|
Senior Member
|
|
Join Date: Jul 16, 2005
Location: Jackson, MI
Posts: 396
|
|
If you're not going to silver line the beads, you can use a 5/32" or 3/16" mandrel for the large hole beads--I got nice ones from Arrow Springs. They're not hollow, so they don't get hot when you make the beads (and I work boro!).
Anita
www.fireflybeads.com
|
2007-11-18, 3:23pm
|
|
Learning...
|
|
Join Date: Jun 01, 2007
Location: Connecticut
Posts: 182
|
|
Anita...You are outstanding! Thanks so much for this information. I'm placing an order now! I'll get one of each and see which works better for me. And I took a peek at your beads...B E A U T I F U L!!!!! I want to be like you when I grow up! Teehee! Thank you Thank you! Teresa
|
2007-11-18, 4:53pm
|
|
Pyromaniac in training
|
|
Join Date: Jul 25, 2007
Location: north east CT
Posts: 161
|
|
My husband has all the RC airplane supplies I need for my torching.
We both have expensive hobbies
But, at least we can share some tools.
|
2007-11-18, 5:36pm
|
Senior Member
|
|
Join Date: Jul 16, 2005
Location: Jackson, MI
Posts: 396
|
|
Teresa, you are too sweet!
Newlondon, my hubby also is a radio control airplane nut. I've never shared his tools, do tell!! (I'm not sure what things would be good to "borrow," hehehe...)
Anita
www.fireflybeads.com
|
2007-11-18, 8:07pm
|
|
Spoiled
|
|
Join Date: Sep 05, 2005
Location: Lake WaConDa, NE
Posts: 1,534
|
|
I bought some larger size stainless steel tubing from the autoparts store. It's used for brake lines and comes in 36" lengths.
__________________
Aimee
"I became insane with long intervals of horrible sanity" Poe
An amazing Cuda with 2 M15's & propane, a Lynx, and a Tondodama torch.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2007-11-19, 1:57pm
|
|
Pyromaniac in training
|
|
Join Date: Jul 25, 2007
Location: north east CT
Posts: 161
|
|
TOOLS
Quote:
Originally Posted by hotflashwanda
Teresa, you are too sweet!
Newlondon, my hubby also is a radio control airplane nut. I've never shared his tools, do tell!! (I'm not sure what things would be good to "borrow," hehehe...)
Anita
www.fireflybeads.com
|
Lets see.....
My husband has a large supply of stainless steel operating room tools that he got at an RC show many years ago. I have found these wonderful. He thinks he has missplaced them.
Don't tell him but I have taken some of the steel that he uses for the axels on his smaller planes, they make great mandrels.
Some of the hollow pipe, He had a stand for his small screw drivers works great for the mandrels
Plus he has some sheet steel that he has made some rod racks for me.
If I find any others I will let you know
|
2007-11-19, 2:16pm
|
|
hi ho hi ho its off to ..
|
|
Join Date: Oct 27, 2007
Location: Odessa, Ontario, Canada
Posts: 289
|
|
online sorce of welding (tig) rod best for mandrels would be 316L or 308L
http://www.welding-direct.com
follow the links for tig rod
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. People who call me weird think I should take it personally. if you really want to upset me you should call me normal !!!
on To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2007-11-19, 4:39pm
|
Senior Member
|
|
Join Date: Jul 16, 2005
Location: Jackson, MI
Posts: 396
|
|
Thanks for the tips, Newlondon, I will take a quick look-see around my hubby's workroom and maybe find some of those tools to borrow!
Anita
www.fireflybeads.com
|
2007-11-19, 5:20pm
|
|
birdergirl ~o~
|
|
Join Date: May 17, 2006
Location: Unorganized Territory
Posts: 2,002
|
|
Meadowsky is selling some 5/32 mandrels in the garage sale!~I've bought her mandrels before and they are nicely ground at the tips.
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
~raised by wolves~sleeps with foxes~cooks for crows~feeds the bears~scrabbles with squids~antisymmetrical~politically agnostic.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Torchering glass since spring '06~ gold cricket & oxycon!~
|
2007-11-21, 4:40pm
|
|
Learning...
|
|
Join Date: Jun 01, 2007
Location: Connecticut
Posts: 182
|
|
Do you know where one would buy rivets to fit inside the 3/16" hole for these type of beads? Also, how do you get them in there? The 5mm (3/16) mandrel works perfect for making these large hole beads btw! Thanks for all the tips!
|
2007-11-29, 7:53pm
|
Senior Member
|
|
Join Date: Oct 29, 2005
Location: Roswell, GA (Metro Atl)
Posts: 103
|
|
Just to back up the conversation a bit....I have bought stainless steel rods and tubing from Metals Supermarket in Marietta, Georgia. There are other metal shops that will cut and grind (sometimes) what you need. Welding stores had TIG rod for smaller sized mandrels, but not for larger.
They did not have a minimum order, and I bought 2 twelve foot long 3/8 inch steel pipes and cut them at home for various items (mandrels, large glass support, etc.). I used a metal blades in my saw to cut them to size and used my grinding wheel to smooth out. I've also bought 1/2 hollow pipe too.
Just another resource!
Kristy N,
|
2007-11-29, 9:46pm
|
Senior Member
|
|
Join Date: Nov 12, 2005
Posts: 1,260
|
|
I got brake line tubing and cut it myself. Big ol' long pieces, 6 feet ish, probably. The guy at the auto parts store said it came in different diameters, and that he could find me some in quite a few of them, in stock. He thought it was cool
I found out about the brake line thing here, reading.
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
I've got way cool handmade bags for sale in the Garage Sale area for a buck each!
|
2007-11-29, 10:07pm
|
|
Senior Member
|
|
Join Date: Oct 28, 2006
Location: Washington
Posts: 725
|
|
the nice thing about brass is its so easy to shape. it does heat up fast, but you can make a handle or find a pin vise to hold the tool. I love brass, because its easy to cold hammer out in to any shape I want or shape on a grinder.
Murf
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
------------------------
Kobuki*Delta Elite*Mirage*Blast Shields*two DeVilbiss 5 LPM* tanks* foot pedal.
|
2007-12-02, 11:08am
|
|
Senior Member
|
|
Join Date: May 04, 2007
Location: San Jose, CA
Posts: 1,212
|
|
Quote:
Originally Posted by spotty dots
I don't think brass is a metal I'd be introducing to the flame as it has lead in it.
Might keep it in some cold water and use to assist with shaping though.
|
Brass is an alloy consisting mainly of Copper and Zinc. Other materials may be added to effect the qualities of the alloy, but I have never heard of Lead being used in Brass.
Malcolm
__________________
ARTCO
Artist's Reliable Tool Company
Website: To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Email: To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Phone:+1.408.288.7978
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 3:15pm.
|