|
Tips, Techniques, and Questions -- Technical questions or tips |
2019-12-28, 6:30am
|
Junior Member
|
|
Join Date: Feb 23, 2009
Location: Texas
Posts: 24
|
|
Press placement on bench
Hi, Just wondering where you all place your presses on your bench for easy reach and use? In front, or on the side?
Thank you and Happy New Year!
|
2019-12-28, 7:35am
|
Member
|
|
Join Date: Sep 26, 2016
Location: Denton Texas
Posts: 95
|
|
Usually to the side on my large, slab graphite marver. Would take a picture, it I am away from my studio right now. It is in my left side when I work.
|
2019-12-28, 9:51am
|
|
SCIENCE Teacher!
|
|
Join Date: Jul 19, 2005
Location: Wylie, TX
Posts: 2,140
|
|
I only put the 1-2 I am using on the actual work bench. The rest are off to the side.
__________________
Yes, I am FosterFire Bead Release.
|
2019-12-29, 6:00pm
|
Junior Member
|
|
Join Date: Feb 23, 2009
Location: Texas
Posts: 24
|
|
I should be more clear: where do you place your press as you are using it?
Thank you!
|
2019-12-30, 1:06am
|
|
Phill
|
|
Join Date: Mar 21, 2009
Location: Winnebago, MN
Posts: 2,489
|
|
It is going to be one of those things you will have to experiment with until you find what works for you.
Let handed, right handed, room between the you and the torch base, how high is your torch and will that interfere with one hand crossing over the torch if needed ( without sizzling the skin ), which hand holds the glass for you and which holds the press handle?
Do you sit, stand, both, swivel chair?
Try what seems like the best fit and then try something else.
Production work is going to be a whole different kettle of fish from one off creations.
Good luck and don't carve anything about what you are doing in stone.
A bruised elbow will cause you to rewrite you current arrangement as will a stubbed toe.
I do suggest you start with as empty a torch bench as you can create to begin with and let your body tell you where you want things.
__________________
The Zombie Apocalypse is Upon Us.
|
2019-12-30, 11:04am
|
Junior Member
|
|
Join Date: Feb 23, 2009
Location: Texas
Posts: 24
|
|
'Clean' work bench did you say??? OK, I can do that.
I sit down at the torch.
I am either right handed or left handed as needed, very ambidextrous.
I guess the important thing is being able to see the press clearly to center the glass.
|
2019-12-30, 1:16pm
|
|
Loving learning
|
|
Join Date: Oct 11, 2010
Location: Florida
Posts: 11,654
|
|
I don't have any presses, but this got me to looking for videos with people using them, and it seemed to me that the one I watched, the press was just to the side of the torch, so the mandrel hand could reach it with the mandrel going under the flame but the press hand wasn't too close to the flame. I figure everyone does it their own way though.
I would definitely need to clean off my bench.
__________________
My current "hot" fantasy involves a senior discount on glass & tools!
|
2019-12-30, 6:34pm
|
Junior Member
|
|
Join Date: Feb 23, 2009
Location: Texas
Posts: 24
|
|
That sounds logical, thank you!
|
2019-12-30, 11:58pm
|
|
Phill
|
|
Join Date: Mar 21, 2009
Location: Winnebago, MN
Posts: 2,489
|
|
Aye, lighting is a lot more important than most people realize.
I have a 6 foot by 3 foot fancy cooing hood (1960's fancy anyway ) that I picked up free on Craigs List and I mounted inside it 2 construction type work lights as well as an 18 inch long fluorescent stick light.
The round work lights have a yellow tinge and the stick light is more of a blue so the 3 of them give me a pretty balanced color.
The nice thing about the stick light is it gives me a straight line of reflected light on my beads so I can see the lumps, bumps and out of round shaping while the glass is still hot enough to do something about it.
__________________
The Zombie Apocalypse is Upon Us.
|
2019-12-31, 10:05am
|
|
Senior Member
|
|
Join Date: Aug 31, 2006
Location: Knoxville, TN
Posts: 2,215
|
|
Mine is to the left of my torch, positioned so I can put the bead in the press without the mandrel bumping into stuff. Some days that is a challenge. It is on the left because I hold my mandrel in my left hand while in the flame, so it is one movement out of the flame and down to the press. Right hand does the pressing.
__________________
Kathy
|
2019-12-31, 5:51pm
|
Junior Member
|
|
Join Date: Feb 23, 2009
Location: Texas
Posts: 24
|
|
Hi, yes the left side sounds logical, thanks!!
|
2020-01-01, 9:13pm
|
|
Slogan Challenged...
|
|
Join Date: Mar 21, 2009
Location: Maricopa, Arizona
Posts: 6,286
|
|
I'm right handed but I find the right side of the torch is easier for me. It seems easier for my right hand to reach the press, if it's already on the right, than to reach across the back of the torch with my arm. I would have to shift in my chair.
I don't go under the flame though. I pull the whole thing out and then press.
__________________
Kristin ~
Facebook: To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Etsy: To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2020-01-07, 9:37pm
|
Senior Member
|
|
Join Date: Apr 17, 2009
Location: Back in Tucson for good
Posts: 354
|
|
I've also read about a lampworker here somewhere who puts her press base on something that brings it to about eye level.
When I use my tools to make cubes I certainly bring it to eye level as well.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 7:54pm.
|