|
2007-01-25, 6:40pm
|
|
Senior Member
|
|
Join Date: Sep 18, 2005
Location: WA
Posts: 1,177
|
|
vertically holed hearts
Hi all,
I have gotten much use out of Lynne's "Hearts, my way Tut", but I still have one chronic problem area- around the hole, between the lobes, at the top of the heart. Every one I've made looks great except I have to touch that area up with my Dremel because there is a thin little crust around the mandrel. I'm not sure if it's because I let the whole bead get too hot, am not pressing the lobes up properly, don't have enough glass for the lobes, or some other factor. Maybe I need to turn the bead upside at the end for a longer time, but I don't want the lobes to get wonky.
Any fine tips would be appreciated!
Thanks!
__________________
Vicki B.
~~~~~~~~~~~
On a Hot Head for 6 years! 1 lb MAPP canisters from Ace
|
2007-01-26, 1:41pm
|
|
Anna Duhame
|
|
Join Date: Aug 27, 2005
Location: Saint Cloud, FL
Posts: 1,135
|
|
HI Vicki!
I think you are right, if you can turn the bead upside down a bit longer and let the "lobes" of the heart slide down a bit it will solve the problem. I was having the same issue, so I know just what you mean. I like to use my paddle or a butter knife to quickly cool the lobes so they don't go all crazy.
__________________
~Anna
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2007-01-27, 11:01am
|
|
Senior Member
|
|
Join Date: Sep 18, 2005
Location: WA
Posts: 1,177
|
|
Another thought
Thanks, Anna,
Another thought I had was that perhaps the way I'm flattening these is compounding the issue. I've been using my barbecue mashers and flattening until the entire side is pressed which may be pushing the glass down towards the bottom. Since that's not the way Lynne does it, she thinks that could be part of the problem.
Back to the drawing board!
__________________
Vicki B.
~~~~~~~~~~~
On a Hot Head for 6 years! 1 lb MAPP canisters from Ace
|
2007-02-03, 4:54pm
|
Senior Member
|
|
Join Date: Dec 13, 2005
Location: Western Washington
Posts: 1,192
|
|
When making vertical holed heart beads I like using my lentil press. I still have my mag mashers too... that is such a great tool it is a shame that everyeone jumped all over her...anyway...
buy making a lentil first...not perfect but it does plump the center and gets you some nice bead holes...(as long as you remember that a lentil press is a far better shaper and a press... after making your lentil then heat one end to pull the glass away from the tip, later you can reshape but making your nice pucker first.
Then at the top heat alternating sides and when that comes up (down depending on your orientation) it forms a nice bead hole around the top...
Also is you start your shape full and let then heat one end like making a bicone..shape that end... then the other end that is full will pretty naturally make a nice end around the top fo the heart...
I prefer vertically holed hearts I think of them as pendants more than as beads
I know...no one asked me.........I just felt like sharing ....I came looking for info on the new R4 glass...that I know have A LOT OF! YIPPEE
__________________
Never lose your sense of awe.
Beads galore at my ebay store!
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Minor with a REGALIA heavenly!
|
2009-02-11, 3:38am
|
|
Knob Creek Glass
|
|
Join Date: Aug 12, 2005
Location: Indianapolis
Posts: 994
|
|
Vicki, where do you find Lynne's Heart tutorial??
|
2009-02-12, 11:50pm
|
Member
|
|
Join Date: Jun 02, 2006
Posts: 44
|
|
Quote:
Originally Posted by barbaracollins
Vicki, where do you find Lynne's Heart tutorial??
|
Hi Barbara.
I think this is the tutorial: http://www.fireballbeeds.com/hearts.html
nana
|
2009-02-13, 12:13am
|
|
Addicted to Melting Glass
|
|
Join Date: Oct 17, 2006
Posts: 229
|
|
I'm confused about what you mean by "crusts" - is it just a rough (non-puckered) hole? Can you post some pix?
__________________
Patty
Santa Cruz Mountains, CA
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2009-02-13, 1:25am
|
|
Gimme that silver glass!
|
|
Join Date: Oct 12, 2007
Location: The Netherlands
Posts: 3,988
|
|
I was wondering about thesame thing, I'm not sure what you mean by crusts? A pic would help.
__________________
Anouk To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
MY NEW E-TUTORIAL: To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 12:10am.
|