|
Studio -- Show us your studio setup |
2010-10-28, 2:28pm
|
|
Wonder-wench
|
|
Join Date: Aug 09, 2010
Location: land of milk & honey
Posts: 1,104
|
|
Garage Studio done!
I would like to thank all the others before me who have generously posted safety information, their studio pictures and great studio set up ideas. I finally got everything together for my very own, newbie garage studio. I probably went a little overkill for a my first foray into lampworking, but that's just how I roll
The workstation is actually an old kitchen counter we got from a remodeler on Freecycle, it's got a ceramic tile top. I cut up the middle section of cabinets to provide a kickspace underneath. It's a good height for standing or sitting.
The ventilation hood is kludged together from a old kitchen hood (thanks to Urban Ore in Berkeley) and a 1000 cfm exterior downdraft blower. A friend made astainless steel back and sides for the hood that comes down to the countertop (added after this picture). Next step is to plumb the propane through the wall.
A lovely GTT Lynx torch, Paragon SC2 kiln, 15 slpm OxyCon and woo hoo, I'm torching baby!
and finally, this hand painted new door.
__________________
Elizabeth
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2010-10-28, 2:35pm
|
|
Somewhat out there!
|
|
Join Date: Aug 26, 2009
Location: Esko Minnesota
Posts: 735
|
|
Looks great. Your gonna have fun.
|
2010-10-28, 2:57pm
|
A True Woofer
|
|
Join Date: Jun 13, 2005
Location: the land of nod
Posts: 3,895
|
|
You have a very cute propane cylinder, but you should try and find a way for it to be outside. Much safer that way.
I also like the door! You'll have lots of fun making beads in your new space.
__________________
Ellen
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2010-11-06, 10:53pm
|
|
Salt Box Beads
|
|
Join Date: Oct 23, 2005
Location: Heading to Paradise
Posts: 4,161
|
|
Hi and Welcome. You are just down the road from me...LOL
Very nice set up and looks like you will be very safe and comfortable once you get the plumbing done for the propane.
|
2010-11-07, 2:48am
|
|
Cherine Perrin Glass
|
|
Join Date: Sep 01, 2005
Location: Knoxville, TN
Posts: 2,045
|
|
Looks like a cool setup Lizzie!
__________________
~ Cherine ~
My Etsy shop: https:// To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. face="Verdana">Facebook: https://www.facebook.com/CherinePerrinLampwork/
|
2010-11-07, 7:56am
|
|
Curmudgeon Engineering
|
|
Join Date: Feb 15, 2006
Location: Near Seattle, WA
Posts: 1,723
|
|
Very nice setup. If you are right handed I would suggest putting the kiln on the other side. It's very easy to inadvertently reach across to put a piece into the kiln and get caught in the flame.
|
2010-11-07, 8:06am
|
|
Disconnected
|
|
Join Date: Jan 31, 2007
Location: Normandy, France
Posts: 1,323
|
|
Quote:
Originally Posted by cheng076
Very nice setup. If you are right handed I would suggest putting the kiln on the other side. It's very easy to inadvertently reach across to put a piece into the kiln and get caught in the flame.
|
Actually I'm right handed and I also have my kiln on the left side of my bench; you still have to reach over with the other hand to open the door so I don't think it makes a difference, in my humble opinion and experience
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2010-11-07, 8:41am
|
|
I'm kinda biz-EE
|
|
Join Date: Aug 08, 2007
Location: Arlington, TX
Posts: 3,610
|
|
It's beautiful Lizzie, I esp. love the hand painted door!
__________________
Astrid
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. * To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. * To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2010-11-08, 1:27pm
|
|
Wonder-wench
|
|
Join Date: Aug 09, 2010
Location: land of milk & honey
Posts: 1,104
|
|
thanks
thanks for all the nice comments.
Even though I'm right handed I put the kiln on that side because the big door opens out to the left, so it made sense to me to be able to use my left hand to open the door outward to put the hot glass into the opening without having to reach around the door.
I'm pretty careful (so far) about the torch flame, and more likely to burn myself on the other hot stuff (have already grabbed hot mandrels more than once). My brain just doesn't register "HOT" as well if it's not actually on fire or glowing red.
__________________
Elizabeth
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2010-11-18, 9:36pm
|
|
dances with ideas...
|
|
Join Date: Sep 15, 2005
Location: A map dot in Montana
Posts: 2,355
|
|
Consider standing up and walking over to put glass into the kiln? I'm pretty careful too, and I made it for 10 or 12 years without a serious burn, by which I mean a trip to urgent care. I still don't know what caused me to lose focus but I got lucky, with no lasting damage.
Another tip that I was given when I was just starting: always put glass rods, etc, down with the hot end away from you. I think it's a very good habit to have.
So anyway--have a ton of fun! And take the safety issues to heart!!
It will be fun to see your work!
__________________
Roberta
”If it makes you happy, then it’s a good thing.” ~ Terryd
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 6:35am.
|