|
Tips, Techniques, and Questions -- Technical questions or tips |
2009-07-26, 11:52am
|
Junior Member
|
|
Join Date: Sep 15, 2008
Location: Yorkville, Illinois
Posts: 3
|
|
Clear gone gray??
I have been having some trouble with my clear glass turning gray??
It first I thought it was a bad chemtane tank, as I work on a hot head with chemtane, so I used a friends... still gray. Then I thought the glass was a miss marked, so I dug out an old clear punty and tried it with no luck... still gray.
I was hoping anyone had some thoughts to help me out. UGH!!
Thanks in advance,
Nicky
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2009-07-26, 12:15pm
|
|
Yeah me!
|
|
Join Date: Jun 24, 2008
Location: indianapolis indiana
Posts: 1,382
|
|
You may just be working it too hot. Moretti clear has a tendency to get yucky if worked too hot. Or, since your on a HH, it could be soot or unburned fuel.
__________________
Kristina
"...he who does not know and does not know that he does not know is a fool, avoid him." -Confucius
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2009-07-26, 12:16pm
|
|
Striking-impared...
|
|
Join Date: Jun 13, 2005
Location: Hot 'n Humid SE Florida
Posts: 595
|
|
It sounds like a sooting problem. What happens if you work further out in the flame?
It's possible also that your HotHead might need a cleaning, although I couldn't tell you how to do it (or if you can clean the new ones).
Have you drained your hoses lately? (If you are on bulk Chemtane, not the 1-lb bottles.)
What about other colors, like white? If it's soot, it will show up clearly on a white bead.
__________________
Gail
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2009-07-26, 12:28pm
|
Junior Member
|
|
Join Date: Sep 15, 2008
Location: Yorkville, Illinois
Posts: 3
|
|
It seems as though all the other colors are fine, but since I want to encase today, clear is the one to give me trouble.
It has been quite a while since I've lit my torch. I have not drained the hoses, and I was surprised that the torch lit without any problems! Sometimes it sputters. Tonight I will disassemble and hang.
I am using Moretti and hadn't had a problem with working too hot, but I will go out and try your suggestions.
Thank you both for your quick reply!!
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2009-07-26, 1:57pm
|
Junior Member
|
|
Join Date: Sep 15, 2008
Location: Yorkville, Illinois
Posts: 3
|
|
An update on my trouble shooting...
I went to Menard's and got a bottle of Mapp/Pro to use instead of the bulk tank of Chemtane and my bead came out perfectly clear. Does gas go bad??
Now, I know that it is not the glass or my HH.
I have my hoses hanging to drain to see if that is the problem.
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2009-07-26, 2:02pm
|
|
Striking-impared...
|
|
Join Date: Jun 13, 2005
Location: Hot 'n Humid SE Florida
Posts: 595
|
|
Glad to know that you found the problem!
__________________
Gail
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 4:24pm.
|