Lampwork Etc.
 
Send a PM to CorriDawn!

LE Live Chat

Enter Live Chat

No users in chat


Donate via PayPal to donate@lampworketc.com

Caber Light


 

Go Back   Lampwork Etc. > Library > Tips, Techniques, and Questions

Tips, Techniques, and Questions -- Technical questions or tips

Closed Thread
 
Thread Tools
  #301  
Old 2009-09-27, 10:11am
likes to make glass stuff likes to make glass stuff is offline
Senior Member
 
Join Date: Feb 06, 2009
Posts: 501
Default

Quote:
Originally Posted by lunamoonshadow View Post
Fine for Loren. Many of us respect Loren GREATLY. However YOU are NOT LOREN. SO PLEASE DO NOT SPEAK FOR LOREN.

ANYONE WHO HAS USED A HOTHEAD KNOWS THAT WAVING THE GLASS, OR "BOUNCING IT" in the back of the flame, is often the *only* way to get a shocky rod, or one with a HOLE running through the length of the rod to heat up without simply exploding. This also works nicely with Devardi.

With an oxy/propane torch, the tip that Tink has offered that often works is turning the oxy off or nearly off & stuffing the rod directly into a pure propane flame, sooting it up completely near the face of the torch & then "cleaning it back off"--this works nicely for a *lot* of shocky rods as well. Unfortunately with a *hothead* this trick isn't possible, so *hothead* users are left with the "bounce & wave" method.

PLEASE HAVE THE COURTESY TO IDENTIFY YOURSELF & PLEASE DO NOT SPEAK FOR PERSONS OTHER THAN YOURSELF. You are becoming more than irritating. This thread is here to discuss the working properties of, & tips & techniques FOR Devardi Glass. BY & FOR PEOPLE WORKING WITH THE GLASS. If you have a question, we'd be happy to try and answer it, but your veiled implications that anyone having good things or positive experiences with the glass "must be working for Devardi" is insulting, as is the fact that you seem to be using a secondary, "sham" account to make your posts attacking this glass.

~luna
Yeah, I wanted to come back and respond to the bouncing thing...

I like my marshmallows lightly browned. If I hold one in the flame, it catches on fire. If I wave my marshmallow in and out of the very end of the flame, it turns lightly browned.

I don't think glass can be confused.

I think that letting it heat a bit for a moment, then stopping it by pulling it out, would prevent it from overheating. I've forgotten to do this with some shocky rods and had it become frit. If I remember to, with challenging glass, then I have a much lower explosion rate.

Kind of like not overcooking my marshmallow.
  #302  
Old 2009-09-27, 10:17am
likes to make glass stuff likes to make glass stuff is offline
Senior Member
 
Join Date: Feb 06, 2009
Posts: 501
Default

Quote:
Originally Posted by yellowbird View Post
whoever told me that was loren stump who I do not and have never spoken for . lol
You are giving info from him, here, as if he's said it in response to this.

If his information applies I think he's wrong. It happens. People can be wrong, even when they have years of knowledge.

For some reason, I thought Loren typically used the regular run colors, though, not the cranky handpulled stuff? I could be wrong on that.
  #303  
Old 2009-09-27, 10:30am
Fine Folly Glassworks's Avatar
Fine Folly Glassworks Fine Folly Glassworks is offline
Hot Glass Neophyte
 
Join Date: Aug 06, 2009
Location: Mt. Pleasant, SC
Posts: 3,293
Default BEARY-NICE Opaque Medium Brown

That's Opaque Medium Brown, and it is such a neat rich color.




Be sure to show us all something you make if you get it!

Seeing everyone's work in pictures is one of the neatest things about this Blog!


Quote:
Originally Posted by DesertDreamer View Post
Ohhh which brown is that???? I need that!
  #304  
Old 2009-09-27, 5:49pm
Lisi's Avatar
Lisi Lisi is offline
one day at a time
 
Join Date: Jun 27, 2005
Location: We are MOVING!!!
Posts: 8,319
Default

I'm really liking how some of these colors behave! I've found few that I would definitely order again because they melt so nice and the colors are true. That opaque peach is one of them!

I still have a lot of rods to try out, and when I get around to making some sets of rounds, I will post them here.
  #305  
Old 2009-10-08, 9:54pm
TheMaster TheMaster is offline
Junior Member
 
Join Date: Oct 01, 2009
Posts: 11
Default

This is a great thread to be at, I have seen very attractive piece of work. And more over use of colors is at its best.
__________________

To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
  #306  
Old 2009-10-08, 10:07pm
Shrimp's Avatar
Shrimp Shrimp is offline
And silence is golden
 
Join Date: Oct 05, 2005
Location: The Shrimp Shack
Posts: 3,230
Default

Wild question here. If a rod has is hollow all the way down it, could it be heated up on one end to a molten blob, and blow through the other end to create a bubble? Perhaps roll the blob in some silver or frit to create some interesting shards?
  #307  
Old 2009-10-09, 4:33am
Fine Folly Glassworks's Avatar
Fine Folly Glassworks Fine Folly Glassworks is offline
Hot Glass Neophyte
 
Join Date: Aug 06, 2009
Location: Mt. Pleasant, SC
Posts: 3,293
Default Glass Has No Memory & Believe The Videos

Quote:
Originally Posted by likes to make glass stuff View Post

I don't think glass can be confused.
I thought I would pass on something simple I was told

"Glass has no memory"

You can work it and then rework it without worry... it holds no memory. For some reason that freed me to do things I might have hesitated on doing with glass in the flame.

The OTHER hard thing I have had to do is BELIEVE the Devardi videos!

For some reason (impatience & stubbornness) I struggle with doing what they say so clearly - introducing and waving the rod at the END of the flame, and then WAITING for it change color before bringing it forward a bit, and THEN slowly allowing it to come to a glow on the end before bringing it forward to finish the melting to use it!

The great price and neat colors and stiffness you get to work with are worth it!



  #308  
Old 2009-10-09, 4:35am
Fine Folly Glassworks's Avatar
Fine Folly Glassworks Fine Folly Glassworks is offline
Hot Glass Neophyte
 
Join Date: Aug 06, 2009
Location: Mt. Pleasant, SC
Posts: 3,293
Default

Can someone tell me how to add my website to my signature picture? I tried to find out how, but I am such a blockhead at figuring that kind of thing out!
  #309  
Old 2009-10-09, 10:39am
mini's Avatar
mini mini is offline
Senior Member
 
Join Date: May 20, 2007
Location: buenos aires.
Posts: 505
Default

Quote:
Originally Posted by Fine Folly Glassworks View Post
Can someone tell me how to add my website to my signature picture? I tried to find out how, but I am such a blockhead at figuring that kind of thing out!
At the top, on the red bar, click User CP. Look down the right side. There is an option, Edit Avatar. Click on that. Your avatar picture (the one that shows up next to your name in your posts) can only be 80x80pixels.
I just changed mine!
  #310  
Old 2009-10-09, 11:28am
Fine Folly Glassworks's Avatar
Fine Folly Glassworks Fine Folly Glassworks is offline
Hot Glass Neophyte
 
Join Date: Aug 06, 2009
Location: Mt. Pleasant, SC
Posts: 3,293
Default

Thank you kindly! I am such a Space Cadet at tracking these things down!




Quote:
Originally Posted by mini View Post
At the top, on the red bar, click User CP. Look down the right side. There is an option, Edit Avatar. Click on that. Your avatar picture (the one that shows up next to your name in your posts) can only be 80x80pixels.
I just changed mine!
  #311  
Old 2009-10-10, 6:21pm
mini's Avatar
mini mini is offline
Senior Member
 
Join Date: May 20, 2007
Location: buenos aires.
Posts: 505
Default

Quote:
Originally Posted by Fine Folly Glassworks View Post
Thank you kindly! I am such a Space Cadet at tracking these things down!

Ooppsss!! I meant LEFT side! Look down the left side after you click on User CP. I can't tell my right from my left. doh!
  #312  
Old 2009-10-11, 9:50am
Fine Folly Glassworks's Avatar
Fine Folly Glassworks Fine Folly Glassworks is offline
Hot Glass Neophyte
 
Join Date: Aug 06, 2009
Location: Mt. Pleasant, SC
Posts: 3,293
Default Non-gloss question

I am finding that one of the light green colors does not go back to a glossy surface. It turns matt or like a satin finish. It is such a beautiful color.

Am I working it to hot? Any suggestions?

  #313  
Old 2009-10-13, 7:54pm
lunamoonshadow's Avatar
lunamoonshadow lunamoonshadow is offline
Senior Member
 
Join Date: Jun 27, 2005
Location: Yarmouth, Maine...home of the Clamfest
Posts: 7,693
Default

The only thing I can think (from working EDP--because I haven't tried that color--don't have any!) is that it sounds like it might be devitrifying? Maybe try the "sweat it" method of bringing it back in the "back of the flame" once you're done shaping & warming it back up until it looks "glossy" or "wet" before you put it in the kiln? That works with EDP (moretti/effetre #254) to get rid of the matte/chalky/satin finish that color tends to get--perhaps it would work with this shade as well?
__________________
And if I laugh at any mortal thing, ‘Tis that I may not weep...” ~Lord Byron

To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.

new purple cricket @ home! minicc @ playing with fire in rockland! Sue & Nikki fighting over who gets to anneal the wonkies
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
  #314  
Old 2009-10-14, 4:53am
Fine Folly Glassworks's Avatar
Fine Folly Glassworks Fine Folly Glassworks is offline
Hot Glass Neophyte
 
Join Date: Aug 06, 2009
Location: Mt. Pleasant, SC
Posts: 3,293
Default

Quote:
Originally Posted by lunamoonshadow View Post
Maybe try the "sweat it" method of bringing it back in the "back of the flame" once you're done shaping & warming it back up until it looks "glossy" or "wet" before you put it in the kiln? That works with EDP (moretti/effetre #254) to get rid of the matte/chalky/satin finish that color tends to get--perhaps it would work with this shade as well?
Wonderful - thank you for the advice. I will give it a try!

Do you or anyone else have pics to show of your work? It's always neat to see the variety.
  #315  
Old 2009-10-15, 1:24pm
baby firefly baby firefly is offline
Senior Member
 
Join Date: Aug 19, 2009
Posts: 181
Default

Hi Dale&Kristina,
I have bunch of beads that I've made with Devardi but I'm so challenged in the technology dept. I haven't been able to figure out how to post them I need to borrow someones child to help me!!
I preheat my rods when I'm torching and am having no trouble getting along with this glass. I was so tickled when I used my new kiln and found that the beads looked the same coming out as they did going in, I have mixed the glass with other 104 glass, used 96 frit and not so sparingly.... I still haven't lost a bead.
If you're looking for info on colors, inquire, I've used quite a few opaques and lots of transparents. The only thing I didn't order was any of the semi-opaques, I will be doing that on my next order, when the new shipment comes in. Anybody have any favorite colors, I should order????
I'm glad for this thread and the generosity of (almost) everyone, to share and help one another.
  #316  
Old 2009-10-15, 3:55pm
Fine Folly Glassworks's Avatar
Fine Folly Glassworks Fine Folly Glassworks is offline
Hot Glass Neophyte
 
Join Date: Aug 06, 2009
Location: Mt. Pleasant, SC
Posts: 3,293
Default

Quote:
Originally Posted by baby firefly View Post
Hi Dale&Kristina,
I haven't been able to figure out how to post them I need to borrow someones child to help me!!

If you're looking for info on colors, inquire, I've used quite a few opaques and lots of transparents.
Thank you! How do you like the transparents? Are they like Effrete - slower to melt?

You have to take your pictures and then open them in a photo editing program. Crop them to the size dimension you like, then resize them to 85 dpi and under 640 pixels. Find where those options are in the software program.

Then save your image. When you make a posting here click on "Image Uploader" on the right. Find your saved image and Upload it.

When it uploads, click on the far right text ID and it will be entered in your posting.

Clear as mud, right, hope that helps!
  #317  
Old 2009-10-15, 5:14pm
baby firefly baby firefly is offline
Senior Member
 
Join Date: Aug 19, 2009
Posts: 181
Default

Thank you, I'm going to put that somewhere safe, so I don't lose it. LOL Seriously, did I mention the electrical forcefield that follows me everywhere and how I can crash a computer simply by gazing at it...........
Yes, the transparents are stiff and now I am able to do stringers that I am proud of!!
I just couldn't get over how vibrant the colors are, even colors that are not strong by nature. I was surprised by the light golden smoke, that has been great fun to work with and all the rose colors are stunning. I do use propane, maybe the lower heat is why I'm doing so well with this glass.
I like sculptural pieces, butterflys, animals, flowers and freeform shapes, so the stiffness is a bonus for me. I can do alot more surface decorations and don't have to worry about everything going out of control on me.
  #318  
Old 2009-10-15, 8:25pm
SilverRiverJewelry's Avatar
SilverRiverJewelry SilverRiverJewelry is offline
Senior Member
 
Join Date: Jul 15, 2009
Location: Ohio
Posts: 2,035
Default

I love this glass. I will definitely be buying more. Yes you have to be careful warming it up but in my opinion (such as it is since I am a total beginner) its worth the extra effort. Here are a couple sets I made
Deep Rose Pink


Salmon


Jungle Green
__________________
Sonja

To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
  #319  
Old 2009-10-15, 8:57pm
princessb's Avatar
princessb princessb is offline
Senior Member
 
Join Date: Jan 26, 2009
Location: Paducah Ky
Posts: 131
Default

Very pretty Sonja
  #320  
Old 2009-10-16, 3:51am
Fine Folly Glassworks's Avatar
Fine Folly Glassworks Fine Folly Glassworks is offline
Hot Glass Neophyte
 
Join Date: Aug 06, 2009
Location: Mt. Pleasant, SC
Posts: 3,293
Default

Quote:
Originally Posted by SilverRiverJewelry View Post
I love this glass. I will definitely be buying more. Yes you have to be careful warming it up but in my opinion (such as it is since I am a total beginner) its worth the extra effort.
If you are a beginner and are making sets like this you definately have "The Gift"!

Keep at it and share your work with us! VERY nice!
  #321  
Old 2009-10-19, 4:45am
amazon's Avatar
amazon amazon is offline
Senior Member
 
Join Date: Jan 13, 2006
Location: Iowa
Posts: 316
Default

Has anybody had a problem with the color of the glass not being what you thought you bought? I was on the Devardi website this weekend trying to decide what colors to start off with and I noticed that many of the pictures are the same picture with the colors altered. Now I'm afraid to buy any of it!
__________________
Karen
Adulthood is the worst after-school program.
  #322  
Old 2009-10-19, 5:34am
blong2001's Avatar
blong2001 blong2001 is offline
Senior Member
 
Join Date: Jan 07, 2007
Location: High Point, NC
Posts: 1,402
Default

All of the colors that I have tried have been pretty true to the website color. The cranberry is brighter than the website though.
__________________
♥.·:*¨¨*:·.♥.·: Bethany :·.♥.·:*¨¨*:·.♥
When a child is born... so is a grandmother
  #323  
Old 2009-10-19, 6:12am
Fine Folly Glassworks's Avatar
Fine Folly Glassworks Fine Folly Glassworks is offline
Hot Glass Neophyte
 
Join Date: Aug 06, 2009
Location: Mt. Pleasant, SC
Posts: 3,293
Default Devardi Color Charts

If you are for real, you can see all the colors with crystal-clear clarity (if you have a good computer monitor) on their bead Color Charts. Don't pick from the rod pictures alone.

Go to their Color Charts:
http://www.devardi.com/glasscolors.html



Quote:
Originally Posted by amazon View Post
Has anybody had a problem with the color of the glass not being what you thought you bought? I was on the Devardi website this weekend trying to decide what colors to start off with and I noticed that many of the pictures are the same picture with the colors altered. Now I'm afraid to buy any of it!

Last edited by Fine Folly Glassworks; 2009-10-24 at 6:16am.
  #324  
Old 2009-10-19, 6:21am
amazon's Avatar
amazon amazon is offline
Senior Member
 
Join Date: Jan 13, 2006
Location: Iowa
Posts: 316
Default

Thanks Bethany, that's good to know. I really like the pinks they have and the cranberry is absolutely gorgeous. If it's even brighter in person it must be TDF!
__________________
Karen
Adulthood is the worst after-school program.
  #325  
Old 2009-10-19, 6:27am
amazon's Avatar
amazon amazon is offline
Senior Member
 
Join Date: Jan 13, 2006
Location: Iowa
Posts: 316
Default

Quote:
Originally Posted by Fine Folly Glassworks View Post
If you are for real, you can see all the colors with crystal-clear clarity (if you have a good computer monitor) on their bead Color Charts. Don't pick from the rod pictures alone.

Go to their Color Charts:
http://www.devardi.com/glasscolors.html
I can't even come up with a response to "If you are for real" that doesn't sound bitchy so I'm just gonna say thanks for the link and leave it at that.
__________________
Karen
Adulthood is the worst after-school program.
  #326  
Old 2009-10-19, 8:22am
likes to make glass stuff likes to make glass stuff is offline
Senior Member
 
Join Date: Feb 06, 2009
Posts: 501
Default

She's actually, right, lol. I thought "troll", too. Sorry, Amazon, there have been some really harsh attacks on this glass, which probably led to the 'for real' comment.

What I can say about the glass matching photos. On my monitor, it appears reasonably close to the same color as in the pictures for the glass I have. It can be really difficult to photograph some things well, though, and I expect some variations when I receive the glass.

Having fought with trying to get shades to appear correctly-especially pinks, reds and purples, I can see doing this. I think they did a good job, honestly, with fixing the colors to be pretty accurate.
  #327  
Old 2009-10-19, 8:23am
yellowbird's Avatar
yellowbird yellowbird is offline
Senior Member
 
Join Date: Jan 23, 2006
Posts: 1,229
Default

If you say anything negative about this glass he jumps on you
he seems to think this is his thread?

He acts as if he has an investment in this glass .WEIRD .
  #328  
Old 2009-10-19, 8:33am
Fine Folly Glassworks's Avatar
Fine Folly Glassworks Fine Folly Glassworks is offline
Hot Glass Neophyte
 
Join Date: Aug 06, 2009
Location: Mt. Pleasant, SC
Posts: 3,293
Default So Sorry

Quote:
Originally Posted by amazon View Post
I can't even come up with a response to "If you are for real" that doesn't sound bitchy so I'm just gonna say thanks for the link and leave it at that.
I'm sorry. Please forgive me. It was wrong of me to say that. You should be offended.

When you said you were afraid to order I thought you were trying to scare other people on purpose. There have been so many unkind attacks on this little Mom and Pop business.

I hope you accept my appology.
  #329  
Old 2009-10-19, 8:36am
likes to make glass stuff likes to make glass stuff is offline
Senior Member
 
Join Date: Feb 06, 2009
Posts: 501
Default

Quote:
Originally Posted by yellowbird View Post
If you say anything negative about this glass he jumps on you
he seems to think this is his thread?

He acts as if he has an investment in this glass .WEIRD .
Folly likes the glass, and likes to use it. Many people defend products they love. Check out the "lauscha clear made my beads crack threads" for more evidence, lol.
  #330  
Old 2009-10-19, 8:37am
yellowbird's Avatar
yellowbird yellowbird is offline
Senior Member
 
Join Date: Jan 23, 2006
Posts: 1,229
Default

not like that they don't
Closed Thread

Tags
devardi


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump




All times are GMT -7. The time now is 11:14am.


Powered by vBulletin® Version 3.7.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Your IP: 44.192.95.161