|
Studio -- Show us your studio setup |
2012-06-20, 4:27am
|
Junior Member
|
|
Join Date: Aug 04, 2011
Posts: 10
|
|
Very Inexpensive Idea for Glass Rod storage
Hi All,
Just thought I'd leave an idea that has worked for me and allowed me to store my glass rods without taking up a ton of room or costing me a ton of money (gutter pipe with three cuts per and about 8 bucks a pop was going to be too expensive, after all why pay money that can go towards glass and tools???? Sorry but considering the rising costs of construction materials, I doubt pvc would be much better in the price category).
Here's what I've come up with . . . I managed to pick up one of those metal cabinets at a last resort shop, for about 40 bucks (estate sales, shops going out of business, flea markets all good places for that) - and I had realized that I needed the room in the cabinet for other things, but the doors were unused space. I went to Walmart and bought four of those over the door shoe storage pieces (8 dollars per), the ones I selected had 24 mesh pockets. I know I know MESH???? Won't the rods rip that or simply go through the holes? Not if you pick up a bulk pack (Sam's, Price Club, Costco) of those 16 oz plastic cups and place one in each pocket. Voila! Easy storage cost about 40 dollars (80 with cabinet) and I can hold so much glass in them. I've had mine for a year now and not a rip. I typically do not use the bottom row - only because it's low to the ground and I really need to fix the lighting in my studio. Now I have one on each side of the door (eliminating wasted space - and although I can't close the doors that's not a problem because I have no need to do so). It's not quite as pretty and neat, but it is completely cost effective and functional and great for quickly finding what I need. It also allows me to divide my glass more easily - Lauscha, CIM, and the silver glass. I've had no breakage and it's easy to put the glass up after I get a shipment. The items inside the cabinet prevent the cabinet from tipping over.
Note: since there is so much of the Effetre, I managed to find one of those candy racks for the impulse buyer at the register, for a dollar at an estate sale, bought three or four pieces of poster board and spent about 30 minutes for another storage center. I cut the poster board so it gave me a flat surface and cut more poster board folded it over the front part of each row and this prevented rods from sliding out as well as allowing me to label the sections. In the bottom rack, the deepest of the shelves, well that turned out to be a great place to store my boro since it's so much longer than my soft glass.
Hope this helps anyone needing a good solution for storing their glass.
If you'd like a pic just let me know and I will add one (I'd like to see if anyone replies )
|
2012-06-20, 4:31am
|
|
Senior Member
|
|
Join Date: Jul 16, 2005
Location: Gainesville, FL
Posts: 450
|
|
Please post a pic. i am trying to envision the depth of the cups/shoe rack holding the rods.
Thanks, - Jen
|
2012-06-20, 5:58am
|
|
Senior Member
|
|
Join Date: Jul 15, 2005
Posts: 604
|
|
Yes, photos please.
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2012-06-20, 6:45am
|
Junior Member
|
|
Join Date: Aug 04, 2011
Posts: 10
|
|
pics
I've attached three pics - One is the pockets idea and the other is a second impulse buy rack (once you see that you'll get the poster board), this one shows the rack done with bubble wrap. I've had an added thought (and yep my project for the weekend is to REORGANIZE! just desperation till I can get a building ). I could put small holes above each pocket and then a large loop of a zip tie or something of that nature looped through the holes that is above each pocket, this would give added stability for the rods standing straight up. There is some glass in the cabinet, but I made sure to put any heavy stuff on the bottom shelf for stability of the cabinet.
Also note that I have pockets (believe its 2nd or 3rd row for frit (I have so much frit) - and if you look closely at an empty pocket you can see the outline of the cup.
|
2012-06-20, 6:10pm
|
|
Senior Member
|
|
Join Date: Jul 16, 2005
Location: Gainesville, FL
Posts: 450
|
|
Very cool. I am not so sure about the shoe rack, i think the ties to hold the rods up would help. LOVE your shelf though, that is great!!
Jen
|
2012-06-21, 6:49pm
|
Junior Member
|
|
Join Date: Aug 04, 2011
Posts: 10
|
|
Thanks Moushka - the shelf was a great find. As for the shoe rack, I've had that set up for a year now and have not had a single rod broken, nothing fell out (even though they lean, the cups do a great deal to stabilize), my guy who delivers the tanks has to go between them and the table - still not a rod broken. Like I said, it's not pretty but it is functional.
I'm a programmer by trade which puts me in the habit of not saying anything till I've done my own test, for in a pinch while you are counting pennies and building stock - I'm confident this is a good get by solution until you figure out how you really want everything to be and can go towards a more perm. solution. Plus, bonus maybe it will help some people to look at things and think how could I use that, how can I tweak it and make it functional - if they can start doing that maybe it will also help with their creativity as well (I'm referring to those who are new to glass and still overwhelmed with all there is to it)
|
2012-06-21, 7:13pm
|
|
Senior Member
|
|
Join Date: Jul 16, 2005
Location: Gainesville, FL
Posts: 450
|
|
I understand. I do like that you can see the colors more easily. i have the pvc in a crate system, and have to hold an ott light over the crate to see a true color, lol.
Jen
|
2012-06-22, 12:06pm
|
Junior Member
|
|
Join Date: Aug 04, 2011
Posts: 10
|
|
Now there is something I could definitely use some help on - the lighting situation. Mine is a garage studio and it's a large garage (1200 sq. feet) with 15 ft ceilings. Often I'm working at night and the light from the task lamps I have always gives off glares. grrrrr. I still haven't figured the solution for that one - and I'm always moving them to see if I can get a better angle. You would think with a big flame right in front you'd have plenty of light, but just not the case.
If anyone has any suggestions as to how I could solve that - which lamps would be best, angles, etc. I sure would appreciate it.
|
2012-06-22, 10:48pm
|
|
Senior Member
|
|
Join Date: Feb 13, 2011
Location: Oregon
Posts: 626
|
|
I got a halogen work light on a clamp and it is clamped directly above my bench to the fan shroud.
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
All my children have paws To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. Proud Member of "YOU PEOPLE" 9.13.11 To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2012-06-23, 7:07am
|
Junior Member
|
|
Join Date: Aug 04, 2011
Posts: 10
|
|
Thanks! I'll give that a try.
|
2012-06-27, 6:01am
|
|
Senior Member
|
|
Join Date: Mar 14, 2012
Location: Bennington, VT
Posts: 1,776
|
|
man, looking at all these nice neat studios makes me want to go clean mine!
all the nice colored glass, separated by color/shade, segregated.
all my stuff is shoved in mason jars willynilly style.
__________________
now i've got a Mirage To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2012-06-29, 2:04pm
|
Junior Member
|
|
Join Date: Aug 04, 2011
Posts: 10
|
|
Take pics - love seeing what others have done for studio set up.
|
2012-07-16, 10:50am
|
Junior Member
|
|
Join Date: Sep 14, 2009
Posts: 25
|
|
Neat idea! Thanks for posting the pic too. Some of us are visual learners!
|
2012-07-16, 10:50am
|
Junior Member
|
|
Join Date: Sep 14, 2009
Posts: 25
|
|
Neat idea! Thanks for posting the pic too. Some of us are visual learners!
|
2012-07-18, 10:33am
|
Kobuki & DIY Homefill Sys
|
|
Join Date: Apr 30, 2009
Location: socal
Posts: 220
|
|
make sure to fire polish the ends of the rods sticking out to prevent cuts...
|
2012-08-01, 7:44pm
|
Senior Member
|
|
Join Date: Jul 04, 2010
Location: Missouri
Posts: 417
|
|
If the cups are loose in the pockets you could try folding and stapling a tuck at the top edge to tighten the opening. It might be more strengthening than putting a hole to run ties through. As to the lighting problem, if you presently have fluorescent fixtures you can try full spectrum lights like the ones used for growing plants. I use full spectrum incandescent bulbs with them and between them it comes pretty close to daylight. Also, my hood has full spectrum lights, small, but every little bit helps.
Andrea
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 10:01pm.
|