|
Tips, Techniques, and Questions -- Technical questions or tips |
2014-07-04, 12:50pm
|
Senior Member
|
|
Join Date: Mar 25, 2013
Posts: 327
|
|
Open glass structure, any tips?
I have seen several amazing pieces of 3D boro glass sculpture made of fairly thin glass rods. They are made in boro, and I would love to know more about this technique.
Here is a link to an example: http://www.emilywilliamssculpture.co...ure.jpg?dc5d59
I would like to have a try, first small, but then maybe bigger. I want to try it out now, as I am thinking of getting a bigger kiln. If this technique suits me, it could be a reason for going bigger with the kiln..... So far, I have mostly been making beads and some marbles.
So anyone who has worked like this....any advice is very welcome! Including books, videos, tutorials......
|
2014-07-04, 3:15pm
|
Senior Member
|
|
Join Date: Jul 14, 2006
Location: Northern Virginia
Posts: 2,366
|
|
She recommends Bandhu Scott Dunham's book(s) "Contemporary Lampworking: A Practical Guide To Shaping Glass in the Flame". I recommend it, as well. I just got the first two volumes, and it is a great resource. She says flame annealing can be done with a hand torch, but she prefers a kiln for her intricate sculptures, and recommends kiln annealing for everything.
Have fun with this and please post pictures!
Mimi
|
2014-07-05, 3:30am
|
|
Senior Member
|
|
Join Date: Dec 24, 2011
Location: Big Island of Hawaii
Posts: 245
|
|
Nighthawk posted a tutorial for Spun glass recently; it's not quite the same, but probably works in a similar way. http://lampworketc.com/forums/showth...highlight=boro
__________________
As my old costume teacher used to say, "Poor taste costs no less."
|
2014-07-05, 4:48am
|
A True Woofer
|
|
Join Date: Jun 13, 2005
Location: the land of nod
Posts: 3,895
|
|
We did this on a smaller scale (bracelets) in a class and we used a Little Torch. I was a fail. My boro kept cracking at my joints.
__________________
Ellen
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2014-07-05, 1:25pm
|
Senior Member
|
|
Join Date: Mar 25, 2013
Posts: 327
|
|
Thanks everyone. I just noticed that Emily Williams, whose piece I linked to, has put quite a bit of information on het website. http://www.emilywilliamssculpture.co...ate-glass-art/
Some great advice there.
The pieces she makes are actually a lot bigger than I first thought.
I made my first little boro spun 'blob'. I quite like it, and it was pretty easy to do. It is about 2 inches wide. Onwards and upwards!
|
2014-07-05, 1:57pm
|
Senior Member
|
|
Join Date: Jul 14, 2006
Location: Northern Virginia
Posts: 2,366
|
|
Nice work! You might also enjoy the glass chain maille jewelry that Kim Edwards makes-- the little rings are tiny!
Mimi
|
2014-07-05, 2:01pm
|
Senior Member
|
|
Join Date: Mar 25, 2013
Posts: 327
|
|
I have met Kim Edwards and seen her work up close. It is amazing! She participated in the Flame Off at the Tucson show early this year. It was fascinating to see her do the very detailed and intricate work, while other were working big and bold.
The amount of attention to detail and precision she displays is far beyond my reach. I am making a big chainmaille type glass scarf. Still chainmaille, but no comparison.
|
2014-07-05, 3:21pm
|
Senior Member
|
|
Join Date: Jul 14, 2006
Location: Northern Virginia
Posts: 2,366
|
|
So glad you got to see her work and her making it, too. It's something to work towards, isn't it? And please post pics of your chain maille!
|
2014-07-05, 6:55pm
|
|
HotFlash Designs
|
|
Join Date: May 31, 2007
Location: Chicagoland and/or Southwest Missouri
Posts: 2,117
|
|
There are also a lot of videos available to rent on smartflix.com
I'm not sure if there is one on this particular technique. But when I can't find something on You tube, I go look there. I have rented a few boro tutorial videos from them. It's a lot like netflix.
__________________
Sheri
Be Curious. Not judgmental.
|
2014-07-09, 3:05am
|
Senior Member
|
|
Join Date: Mar 25, 2013
Posts: 327
|
|
Ah, I was getting all exited about the great videos on Smartflix.....to then find out they do not ship to the Netherlands. Too bad.
|
2014-07-09, 4:21am
|
|
hyperT
|
|
Join Date: Jan 31, 2013
Location: San Antonio, Texas
Posts: 582
|
|
Glass Crochet, Weaving, Spun Glass
Q: How do you get to Carnegie Hall from here? A: Practice.
To make the loop the glass must be the right temperature.
The right time to do it is to hesitate until the glass just loses its glow from the fire, then form the loop. You can just roll the glass between your fingers.
First slightly back away from you, then back towards you. I stretch it just a bit as I'm rolling it in my fingers. If the temperature is right it will form the loop.
You need to use a relatively sharp and small flame for this. Large flame large loop, small flame small loop.
Make sure the parts are welded to each other after making the loop.
You have to do this weld quickly or the loop will melt away.
Just like crochet, there are many different styles for making objects.
This is one of the basics.
If you wish to make a circular pattern. Form a "Maria" ( a flat disc) on the end of a rod. You can then add rows around it.
Hint: The bending point of any glass is just below the melting point.
Have fun!
|
2014-07-09, 4:52am
|
|
hyperT
|
|
Join Date: Jan 31, 2013
Location: San Antonio, Texas
Posts: 582
|
|
Maybe One Day
You will make one of these too.
|
2014-07-09, 8:12am
|
Senior Member
|
|
Join Date: Mar 25, 2013
Posts: 327
|
|
Thanks! Not quite the same, but very interesting.
And I guess that my next step after the blob will indeed be the ship.
|
2014-07-09, 8:19am
|
|
hyperT
|
|
Join Date: Jan 31, 2013
Location: San Antonio, Texas
Posts: 582
|
|
Quote:
Originally Posted by Floorkasp
Thanks! Not quite the same, but very interesting.
And I guess that my next step after the blob will indeed be the ship.
|
Ha Ha Ha yeah go for it!!!!
|
2014-07-10, 5:24am
|
|
hyperT
|
|
Join Date: Jan 31, 2013
Location: San Antonio, Texas
Posts: 582
|
|
Reply
The problem with any pieces like these are that they can be very delicate and fragile. As such the completed piece must be handled with care.
Even the piece that Emily made.
The trick here is to make sure the parts are fused together.
Granted the borosilicate glasses are very forgiving, but we still must take
some reasonable care.
Some of the spun glass artists merely tack the parts together making the piece even more fragile.
I use a 4mm to 5mm rod to crochet with. I have seen guys use 1/2 inch (12.7mm) rods to do it with.
I would suggest a larger flame to stretch the parts but fuse them together in a tiny flame.
As for me, I use a National 3A Blowpipe with a number 3 torch tip when I make do my glass crochet.
You may have seen the Italian glassblowers use these in videos.
This is a very versatile torch.
I have made boro serpentine dragons over 2 feet long on this torch and use it for almost anything I make. Doubtless it takes practice.
Close up photos can really distort things LOL.
hyperT: Assistant director in directory assistance department of redundancy department.
Have fun.
|
2014-07-10, 9:20am
|
Senior Member
|
|
Join Date: Jul 18, 2007
Posts: 568
|
|
104 COE glass is actually much more durable than 33 in this type of work, once you actually get the thing made. Boro is harder, but more rigid, and for these type pieces flex is very important. It's harder to make things with soft glass, though, because of its tendency to explode from thermal shock.
|
2014-07-17, 1:44am
|
Senior Member
|
|
Join Date: Feb 28, 2014
Location: U.P Michigan
Posts: 231
|
|
If you take a small rod and make the tip flat,you can use that to attach and pull from. It is hard to teach but you pull out like 4 times longer than a loop pull.It dont matter where you place it back as long as its next to your last pull. you will get the effect you are looking for i believe. You look like your close but you are overlaping too much. Next time i get to the torch ill see about posting a picture of what im trying to get across(even if its not to well)
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 4:36am.
|