|
Tips, Techniques, and Questions -- Technical questions or tips |
2010-04-11, 7:59am
|
Senior Member
|
|
Join Date: Nov 22, 2009
Location: Wisconsin
Posts: 132
|
|
mandrel rack
Zach just opened up his new Glasshive kiln. He hasn't started it yet, but hopes to this afternoon. The studio in Madison has a metal rack that the mandrels are placed on. He is contemplating buying one, but doesn't know if it is really a necessary purchase. I was just hoping to get some feedback from LE users on the usefulness of the mandrel rack.
So my question for all of you experienced kiln users.......Do you use a mandrel rack or do you just place your beads directly on the floor of the kiln? (There is a fiber blanket on the floor of his kiln, so he wouldn't exactly be placing it on the floor itself.)
Thanks for sharing your opinions, we both appreciate it!
|
2010-04-11, 8:04am
|
|
Live and Let Live
|
|
Join Date: May 06, 2007
Location: Southern NH
Posts: 2,292
|
|
I use a rack because if your bead is too hot when you put it in the kiln and you place it on the fiber floor, you'll get marks on the bead and even fibers / residue embedded in the glass. I found I was stabbing the ends of the mandrels into the back wall of the kiln to keep the bead off the floor, which isn't good for the back wall of the kiln. So mandrel racks are a must, IMO.
__________________
Lisa ~~burning a Mega Minor on 2 M10's~~
This life is more than just a read-through. ~Anthony Kiedis
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2010-04-11, 8:08am
|
|
Senior Member
|
|
Join Date: Jul 03, 2008
Location: Denmark
Posts: 176
|
|
There is a rack in the back of my kiln. I like it and it makes it possible for me to fit more beads in the kiln at a time. You can put in multiple layers in one go, without the beads touching.
I have the British Kilncare and it came with racks (two actually, wich makes it possible to use one half of the kiln with a rack and the other without, if that is your fancy).
__________________
Lone Ringskaer, Aarhus, Denmark
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. R#115
|
2010-04-11, 8:58am
|
|
Life is change. Love it
|
|
Join Date: Oct 10, 2005
Location: Ontario Canada
Posts: 5,566
|
|
Yes a mandrel rack is neccesary. I made my own and it's lasted 6 years so far.
__________________
cRlyn, cause Traci says so
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2010-04-11, 9:01am
|
Angie09
|
|
Join Date: Aug 06, 2009
Posts: 1,788
|
|
Quote:
Originally Posted by Carolyn M
Yes a mandrel rack is neccesary. I made my own and it's lasted 6 years so far.
|
Any chance you have a pic of yours?? I'd love to see it.
|
2010-04-11, 9:22am
|
|
Life is change. Love it
|
|
Join Date: Oct 10, 2005
Location: Ontario Canada
Posts: 5,566
|
|
My kiln is on right now, so no pic yet. Its is very basic! I used a BBQ vegetable griller, divided in half with the handle cut off. Propped it against a kiln brick and voila! You have a ton of little squares that keep your mandrels rolling together and there is room for many beads without any of them touching. I do stack when they are cooler.
Cost me $2.00 from the dollar store.
__________________
cRlyn, cause Traci says so
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2010-04-11, 9:25am
|
|
Senior Member
|
|
Join Date: Jun 22, 2005
Location: west of Atlanta, Georgia
Posts: 5,371
|
|
Yes I agree. I use 2 racks as my kiln has 2 doors. I think they are essential in avoiding mishaps
|
2010-04-11, 11:06am
|
|
Semi Retired
|
|
Join Date: Sep 19, 2005
Location: Milpitas, CA
Posts: 6,896
|
|
I just ordered a 3/4x11" rack from Devardi for my new beehive kiln (regular guy). Here is the link:
http://www.devardiglass.com/supplies.htm
__________________
Mary
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. | To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. | To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. | To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. | To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2010-04-11, 3:19pm
|
|
Dangerous Woman
|
|
Join Date: Nov 21, 2005
Location: Southcentral PA
Posts: 5,018
|
|
I have a rack in my kiln but hardly ever use it. I rarely ever have any problems.
__________________
Nancy
May your torch burn brightly and your oxy never run out. - Karen Hardy
On a Cheetah with a hurricane Still have my Lynx as a back up.
|
2010-04-11, 4:25pm
|
|
FireDancer Glass
|
|
Join Date: Oct 20, 2005
Location: Banks, OR
Posts: 884
|
|
I will be buying one....thanks for the link. I have torn up the back of my kiln to keep the beads off of the fiber on the floor of the kiln. Bout time I get one!
__________________
Every artist dips his brush in his own soul, and paints his own nature into his pictures.
Henry Ward Beecher
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Christy
|
2010-04-12, 6:04am
|
Senior Member
|
|
Join Date: Feb 20, 2007
Posts: 768
|
|
I made my own rack out of this stuff: http://www.tractorsupply.com/welding...-gauge-3506801 because I had some on hand. I just cut it down to fit the length and height of my kiln. Works like a charm and I can stack tons of beads without touching the floor of the kiln or other beads.
|
2010-04-12, 6:18am
|
|
Senior Member
|
|
Join Date: Aug 01, 2005
Posts: 2,159
|
|
I bought a few 1 X1 X 8 inch strips of firebrick (sold as 'kiln furniture') at my local ceramics supply place. I sat the across the back of the kiln and sit the mandrel tips on them when I load beads into the kiln. They keep the beads off of the kiln floor and you don't have to fool around trying to get the mandrel tip into a hole in the rack while the heat rushes out at you.
Robert
__________________
Robert Simmons
(Former) Director for Bead Donations
Beads of Courage, Inc.
|
2010-04-12, 6:48am
|
|
Hobby Junkie
|
|
Join Date: Dec 08, 2009
Location: Perkasie, PA
Posts: 1,967
|
|
Hmmmm.. Nobody ever told me about a mandrel rack! I like Roberts firebrick idea. I'll need to get some of those 1x1x8's! I just throw all of the mandrels in there. I usually don't have issues with beads touching because the longest torch time I usually get is 1.5 hours. (I have a 16 month old and I work full time so Mommy Time is a rarity!). I don't usually get more than 4-5 beads made in that time (unless I'm making spacers, but then I put 5 or 6 on a mandrel).
__________________
Cori C-R
PS - This is what part of the alphabet would look like if Q and R were eliminated.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2010-04-12, 6:57am
|
|
Senior Member
|
|
Join Date: May 20, 2007
Location: buenos aires.
Posts: 505
|
|
I don't use a mandrel rack and I've had one small kiss mark so far. Obviously that bead when in too hot. But then again, I don't use any Lauscha. I think it's Lauscha that needs to go in super hot.
|
2010-04-12, 7:35am
|
|
Senior Member
|
|
Join Date: Aug 31, 2006
Location: Knoxville, TN
Posts: 2,215
|
|
Sometimes I use my rack, sometimes I don't. I made mine out of a sheet of that grid-like stuff you can get at Lowes or Home Depot. I just cut it and bend it to fit and be the shape I want.
__________________
Kathy
|
2010-04-13, 8:06am
|
|
I speak Murrini!
|
|
Join Date: Oct 12, 2006
Location: In a Glass House, CA
Posts: 9,170
|
|
I agree with earlier posts - a kiln rack is a MUST! If you think you can squeeze one more "Honey Do" outta the hubby, here's a suggestion...
You can purchase perforated stainless steel sheet (absolutely MUST be steel - no zinc or mixed metal of any sort) that looks like this:
Measure the width and depth of your kiln and cut a sheet that, when BENT into a flat-bottomed "U" shape, will for sure fit inside easily without getting near any of the heating elements (I don't know if the Glasshive one's are exposed - my Paragon has them insulated inside the walls; if heating elements come into contact with mandrels or metals, this can shock the user and zap the kiln/controller, so warn Zach, ok?).
Here's a picture of a Kiln Rack I just sold - purchased from Arrow Springs - which was just a touch too wide for my kiln interior. You can see from the shape of it, though, that you can "create" something very similar and equally effective outta the perforated steel sheet. With a "short" side in the front and a "tall" side at the back (and just the perforated steel in the middle for stability where you've bent each end up) this is an inexpensive do-it-yourself possibility.
I recommend making the bends "hard bends"; in other words, make sure they are nice right angles, no bowing - so the bottom lays nice and flat. Also, try to make the bottom so that at least 3" is in between the tall side and the short side which will stabilize it well. If you cut the top rows of the short and long bent sides down the centers of the holes, this will allow mandrels to sit easily into those little divots too without rolling against one another.
WINK!
De
__________________
~DeAnne~
I've got a murrini for that,'ya know! To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
"Only a fool rushes to his own demise..." ~Zorro
|
2010-04-13, 2:28pm
|
|
Senior Member
|
|
Join Date: Jan 26, 2009
Location: Paducah Ky
Posts: 131
|
|
Love that idea De!
|
2010-04-13, 7:58pm
|
|
The Andrea Half
|
|
Join Date: Aug 18, 2006
Location: Georgia
Posts: 1,411
|
|
I have some 1/2" x 1" kiln blocks, and I rested a threaded ss rod on thhose. Voila, instant kiln rack.
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. * To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. *
|
2010-04-13, 8:05pm
|
Senior Member
|
|
Join Date: Nov 22, 2009
Location: Wisconsin
Posts: 132
|
|
Thanks for all the great suggestions!
|
2010-04-13, 11:11pm
|
|
Senior Moment
|
|
Join Date: Apr 15, 2008
Location: Liberty NC
Posts: 688
|
|
I bought a really cheap pizza stone (~$5)and used a tile saw to cut 1/2 inch strips. You can easily customize the length for your kiln.
__________________
All that we see or seem is but a dream within a dream. Poe
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2010-04-14, 12:58am
|
|
Senior Member
|
|
Join Date: Jun 26, 2006
Location: Vancouver Washington
Posts: 3,986
|
|
That is what I have been looking for everywhere. I found a piece someplace and I could no way have come close to bending it. Wonder if arrowsprings would custom make me one for my kiln it is a jen kin that is wide. I would love to be able to stack my mandrels in the holes. It would free up alot of space
__________________
Lori
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2010-04-14, 4:22am
|
|
offically down under
|
|
Join Date: Dec 22, 2005
Location: Sydney, Australia
Posts: 3,131
|
|
I buy welding rods for mandrels so I just made a zig zag out of the 3' long piece. The ends are a bit longer and they sit in 1"and 2" kiln furniture so I have two rows.
__________________
Tammy
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2010-04-14, 10:05pm
|
|
To Bead Or Not To Bead
|
|
Join Date: Jun 15, 2005
Location: Livonia, Michigan
Posts: 2,089
|
|
I use mine all of the time. Each new bead I make gets placed on the rack. When it fills up, I will move those beads off the rack and over to the side so I can refill the rack as I work. There has been more than one occasion that I didn't use the rack only to find that the bead either picked up some kiln dust or is dented in on one of the sides (I make a lot of chunky bicones).
__________________
Etsy: To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Ebay: To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2011-02-19, 3:15pm
|
|
Formerly Sassygirl
|
|
Join Date: Apr 14, 2006
Location: Murrieta CA
Posts: 1,727
|
|
I just talked to Mike at Glass hive this morning and he can make kiln racks that will allow the doors to close fully on his kilns and will not hurt the firebrick on the doors or shelf. Best thing is it will custom fit my regular guy kiln yayyyyy. Mike is just the greatest and if you are in need of a kiln rack give him a call.
__________________
Stacie
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 7:16am.
|