|
Safety -- Make sure you are safe! |
2006-11-05, 3:18pm
|
|
Senior Member
|
|
Join Date: Oct 28, 2006
Location: Washington
Posts: 725
|
|
storing propane outside
I plan on storing my 100lb propane tank outside and plumb it into the shop. Any advice as to whether one needs to cover the tank and regulator from the constant winter rain? I see larger tanks out side, but a truck comes out to service these, I will be taking this one into town to have it filled. is there as well a down side to making a small shed(tall dog house, small out house) to hide it, can not say these are the prettiest things to have in ones landscaping
|
2006-11-05, 3:19pm
|
|
Queen Bead
|
|
Join Date: Sep 14, 2005
Location: pinckney mi
Posts: 440
|
|
I keep mine in the shed and have the lines run through to my house.
__________________
I looked at all the caged animals in the shelter...the cast-offs of human society. I saw in their eyes love and hope, fear and dread, sadness and betrayal. And I was angry. "God," I said, "this is terrible! Why don't you do something?" God was silent for a moment and then He spoke softly. "I have done something," He replied. "I created You." ~ Jim Willis
|
2006-11-05, 4:13pm
|
|
Senior Member
|
|
Join Date: Jun 10, 2005
Location: Manhattan,KS the land of Purple Pride
Posts: 7,718
|
|
I have my BBQ tank in a garbage can with holes drilled in the bottom of it for circulation. If there were a big enough can you could use that. I also put a hole in the side for the hose connection.
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. Rose Leslie
_____________________________________
|
2006-11-05, 8:02pm
|
|
Gentleman of Leisure
|
|
Join Date: Jun 10, 2005
Location: A Little Bit West of Yosemite Valley
Posts: 5,200
|
|
IF you feel that tank valve and regulator need protection from rain, something as simple as a plastic bucket turned up side down over valve would be sufficient... Thousands of tanks sit outside in all sorts of bad weather and do not suffer.... I would not worry about tank per say... Regulator can also withstand a lot of abuse, but covering it can't hurt....
Something as simple as some wooden lattice work can disguise tank and help blend it into landscape.
Dale
__________________
You can lead a person to knowledge, but you can't make them think. To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Vendor-Artist-Studio-Teacher Registry To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
San Francisco - A Few Toys Short of a Happy Meal
|
2006-11-06, 5:09am
|
|
Safety ALWAYS
|
|
Join Date: Jun 10, 2005
Location: Sauk Rapids, Minnesota
Posts: 2,401
|
|
Take a one gallon plastic milk jug and cut the top off, and use it to cover the regulator. You don't need to worry about the valve, but I would at the very least cover the regulator. Most of these regs are designed for either inside or protected outside use.
Besides the fact that they are expensive...
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Chaotic Glass: Safety for the glassworker, and random thoughts and opinions on the state of the glassworking world To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 3:00am.
|