You make the base bead with the new moretti clear...item number is above...
then you put the edp over it...the thinner the edp the better...
now
you can also put it over lauscha(SP?)clear...it doesn't devitrify but IF
you put the lauscha on top of the edp ...the edp blances underneath (loses its color.)
below is the picture with lauchsa
the bead on the left had lauscha over the edp...you can see the color of the edp blanched under the lauscha but not in the other bead ( the new effetre clear mentioned here)...
just some additional information...
I posted here in another thread when I made this discovery.
I am glad I got that info wrong...I must have misheard at Frantz when I was there.
so OF the clear's I have tried...not all of them yet and I WILL test them all...
this clear I referenced seems completely compatible with edp...
but when I make the larger beads....I still have to deal with some devit...but not with smaller beads.
I am used to dealing with devit and edp....but now it is minor...
again the thinner the layer of edp the better
you will be able to love this color now...
I do have several other clears ..I will see what I get with them...
and I got 1 rod of the DH clear (Mike was giving it with your order when I was there) I can try that but I think that was a very small batch...don't think it is stocked...