Lampwork Etc.
 
TrueDesign on Ebay

LE Live Chat

Enter Live Chat

No users in chat


Donate via PayPal to donate@lampworketc.com

Caber Light


 

Go Back   Lampwork Etc. > Library > Tips, Techniques, and Questions

Tips, Techniques, and Questions -- Technical questions or tips

Reply
 
Thread Tools
  #1  
Old 2017-12-06, 8:52pm
Dia-T's Avatar
Dia-T Dia-T is offline
Senior Moment
 
Join Date: Jan 09, 2006
Location: Omaha. NE
Posts: 332
Default Mandrel making from welding rod

I need longer then 12 inch mandrels and was told I could buy welding rod from Harbor Freight and cut my own.
No problem, except I know nothing about welding and all the rods I have found are soft wire.
What am I looking for, to cut mandrel from?

Dia
__________________
Dia Hilton
Minor burner w/ tank air
Currently no webpage....
Reply With Quote
  #2  
Old 2017-12-06, 8:59pm
Croft Eeusk's Avatar
Croft Eeusk Croft Eeusk is offline
Queen of the milo field
 
Join Date: Jul 30, 2012
Location: In the middle of US and the middle of forty acres
Posts: 1,761
Default

You need TIG rod, stainless steel 308, 309 or 316. I usually get mine from a welding shop.

Also make sure to scrub them, since they can be oily & bead release won't stick.

dj
__________________
Dance all you want, but keep one hand on the wheel.
'Opinions are like assholes. Everyone has them, but you don't have to stay in the same room while they fart.' - Jack Abbott

Last edited by Croft Eeusk; 2017-12-06 at 9:01pm.
Reply With Quote
  #3  
Old 2017-12-06, 9:42pm
Dia-T's Avatar
Dia-T Dia-T is offline
Senior Moment
 
Join Date: Jan 09, 2006
Location: Omaha. NE
Posts: 332
Default

Thank you.
__________________
Dia Hilton
Minor burner w/ tank air
Currently no webpage....
Reply With Quote
  #4  
Old 2017-12-06, 10:23pm
Speedslug's Avatar
Speedslug Speedslug is online now
Phill
 
Join Date: Mar 21, 2009
Location: Winnebago, MN
Posts: 1,777
Default

Oh and file, grind or otherwise round the cut ends.


Nipping them to length leaves a wonderfully wicked corner that just wants to reach right out and slash the side of your thumb right down to the bone just when you have a monster size blob of hot molten glass on the other end with the master piece of a life time perfectly encased in a wonderful clear without a single air bubble in it.

I use the side of one of those disc cutters in my dremel tool and just rotate the point gently against the flat of the disk to round the end of the mandrel.
__________________
So, What Do We Do Now? We continue to try to make a difference when and where we can. Because that's what we do.

Last edited by Speedslug; 2017-12-06 at 10:25pm.
Reply With Quote
  #5  
Old 2017-12-07, 7:18am
Chocake's Avatar
Chocake Chocake is offline
Senior Member
 
Join Date: Oct 27, 2014
Location: North of Nowhere
Posts: 1,746
Default

All of the above. Don't waste time on Harbor Fright. They have better quality rods at the welding supply and they're all cheap compared to mandrels. You can harden them a little more by heating them to cherry red (not really glowing) an dunking them in water a couple of times in quick succession. I've even gotten the shop guys to cut mine to length and de-bur the ends for me a time or two, if I ask really nice and take them cookies.
Reply With Quote
  #6  
Old 2017-12-07, 11:20am
Sue in Maine's Avatar
Sue in Maine Sue in Maine is offline
Senior Member
 
Join Date: Jun 14, 2005
Location: The Rocky Coast State!
Posts: 6,515
Default

Quote:
Originally Posted by Chocake View Post
All of the above. Don't waste time on Harbor Fright. They have better quality rods at the welding supply and they're all cheap compared to mandrels. You can harden them a little more by heating them to cherry red (not really glowing) an dunking them in water a couple of times in quick succession. I've even gotten the shop guys to cut mine to length and de-bur the ends for me a time or two, if I ask really nice and take them cookies.
OOohhh, good tip on the cookies!

Sue
__________________
Sue Walsh
The past is history,
The future is a mystery
and the present is a gift.
Reply With Quote
  #7  
Old 2017-12-09, 6:06pm
Snakebite69 Snakebite69 is offline
Junior Member
 
Join Date: Oct 01, 2017
Posts: 28
Default

I agree with everything everybody said and what's nice about a welding place is they have so many different sizes
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump




All times are GMT -7. The time now is 1:15pm.


Powered by vBulletin® Version 3.7.5
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Your IP: 54.167.44.32