|
Boro Room -- For Boro-related tips, techniques, and questions. |
2005-11-12, 7:04pm
|
|
Senior Member
|
|
Join Date: Oct 24, 2005
Location: Colorado
Posts: 337
|
|
boro boro boo
Hi All, I have just started trying to make some headway with boro. Right this minute there is a little sea dragon and a bead from Momkas silver iris in the kiln... doing Nothing , nada, nix. it is staying a light (boring) opaly cleary tan. I have tried it at 1050 for 30 mins, then 1175 for 30 min, now Im letting it ramp down. What is the secret? Any thoughts?
Thanks Saxon.
|
2005-11-12, 9:03pm
|
|
ManBearPig
|
|
Join Date: Jun 28, 2005
Location: Roanoke, VA
Posts: 8,540
|
|
I would try flame striking it prior to putting it into the kiln. Work the bead until you are done, then take it out of the flame and let it cool for 30 seconds or so. Then, bring it into the back of the flame (out near the tip) and it should strike.
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. • To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. • To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. • To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2005-11-14, 11:33am
|
|
Flameworker
|
|
Join Date: Jul 27, 2005
Location: Seattle
Posts: 30
|
|
Yes, that's what I would have suggested too. The silver Iris has just a hint of silver so the striking wont be that dramatic. But it should be a light transparent purple not tan???? Are you sure it's Silver Iris?
|
2005-11-14, 4:25pm
|
|
Senior Member
|
|
Join Date: Oct 24, 2005
Location: Colorado
Posts: 337
|
|
yes, at least thats what I ordered from ABR and thats what the bundle said. . I just put a test piece in the kiln w other colors as well to see what happens at 2000.
S
|
2005-11-16, 11:46am
|
|
Senior Member
|
|
Join Date: Aug 29, 2005
Location: Orlando Florida
Posts: 1,208
|
|
This brings up an interesting question for me. When I start doing boro, what temp should my kiln be at when I finsh a bead or marble and how should I ramp it down?
|
2005-11-16, 11:57am
|
|
ManBearPig
|
|
Join Date: Jun 28, 2005
Location: Roanoke, VA
Posts: 8,540
|
|
It depends on the color and size. Certain colors like different kiln temps. Some kiln-striking reds, for example, need about 1050 to develop color. Some colors need 1150-1175 to develop. Some go in at 1000. The larger the piece, the longer it needs to stay in the kiln. I know some marble makers that make 3" and larger marbles, and they leave them in the kiln for up to 24 hours.
I would get a copy of Boro Bead Magic by Doug Remschneider. He goes pretty deeply into striking colors both in the flame and in the kiln, and tells you kiln settings to get specific colors.
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. • To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. • To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. • To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2005-11-17, 5:28pm
|
|
Save the Numbats
|
|
Join Date: Jul 23, 2005
Location: The Arctic
Posts: 577
|
|
Silver Iris and Violet Iris don't have very much silver. Also, there has been MUCH confusion on these colors...
Violet Iris is supposed to have a trace of silver, Silver Iris, substantially more. I got a sample of Violet Iris and liked it. I wanted to try Silver Iris, but it wasn't in my sample pack. Momkas sent me another Violet Iris, but no Silver, with my next sample pack, and they owed me a small refund anyway so I called and talked to Sabina, and I was sent two pieces of Silver Iris. ... I thought? it was just like the Violet Iris. I called Sabina and she said there may have been a labeling problem (don't get me started on the labeling confusion between Carribean Coral and American Beauty).
So, I thought, I know I'm going to like Silver Iris. I ordered a pound from Generations Glass. I cannot detect any silver! It's just like the Violet Iris... but more BUBBLY!!! AAAGH! I'd try a different color. If you're expecting to get striking action, you won't get it from Momka Iris.
Anyway, the kiln question... I leave my kiln at 1070 all day. It's an AIM 99LS, so it's not actually 1070 in the front... it's more like 950-1000 by the door. So I leave most of my stuff a few inches in and then push them all back at night, soak for an hour or two, ramp to 950 over 1 hour (at least), soak 20 min, ramp to 650 and shut off. You don't really need to get over 1075 to strike your colors unless you really want. 1100-1200 can make some colors look good, but it can cause a problem with some colors, such as sparkles, so I don't go over 1090.
|
2005-11-18, 5:23am
|
|
boro color bender
|
|
Join Date: Jun 06, 2005
Location: The Oregon coast!
Posts: 10,039
|
|
Try amber purple and double amber purple to get striking down. Work it hot and make it transparent. Let it cool below glowing before you put it in the kiln at about 1075. It will strike beautifully.
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
"Truth is, everybody is going to hurt you; you just gotta find the ones worth suffering for." -Bob Marley
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 2:31pm.
|