Lampwork Etc.
Send a PM to CorriDawn!

LE Live Chat

Enter Live Chat

No users in chat

Frantz Art Glass & Supply

Beads of Courage


Go Back   Lampwork Etc. > Library > Studio

Studio -- Show us your studio setup

Thread Tools
Old 2008-12-19, 9:20am
Mary K's Avatar
Mary K Mary K is offline
Join Date: Jan 12, 2007
Location: California
Posts: 985

Hello Raymond & Katie,
Your ventilated lampworking bench turned out so well. Since I am a neat freak I just love how it looks, so well organized, just beautiful.
In looking at the pictures of Katie torching at the bench I instantly thought "She needs a Creation Station!" I have one and they are so comfortable, have you considered installing one for Katie?
Have a very happy Holiday,
Mary K
GTT Sidewinder & 3 Regalias

To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.

You cannot do a kindness too soon, for you never
know how soon it will be too late.

To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
PLEASE like my page!
Reply With Quote
Old 2008-12-19, 12:53pm
GlassyEyedGirl's Avatar
GlassyEyedGirl GlassyEyedGirl is offline
Did someone say SALE?
Join Date: Aug 20, 2008
Location: Indiana
Posts: 995

Nice-looking setup there! What a thoughtful and kind husband you are Raymond. DWP is a lucky gal, and you two seem very happy! Can't wait to see her handiwork.

I have a DH2B (aka: fiance ) who is awesome and helped me build a table in the garage. I may start a thread and post some photos once it is all painted and done!
Reply With Quote
Old 2008-12-19, 8:05pm
RaymondMillbrae's Avatar
RaymondMillbrae RaymondMillbrae is offline
Join Date: Dec 29, 2007
Location: San Francisco Bay Area
Posts: 207

Thanks again, gals.

And Mary...we both did not like the concept of the Creation Station for ourselves.

Not that it's bad or anything (as evidensed by the fellow lampworkers who own one, and love it), but we didn't like the fact that the arm rests stuck out over the edge of the table like it does.

The parts nearest the torch are nice (to give you some stability when doing intricate stuff), but we found that it was not really needed if we were properly positioned on the seat & table.

Let me explain: If we sat lower on the bench, then we would also be lower on the table. (The torch would be higher in our line of sight). And if we raised the torch 1.5" inches off the table (a great tip we found in Corrina's book, "Passing the Flame"), it enabled us to place her elbows flat on the table, while keeping her arms straight to the working part of the torch. And THIS was the trick to good stability.

Like I mentioned before, we also made some nice elbow pads out of the extra material.

Now my DWP sits lower to the table, and we also raised the torch itself 1.5" inched off the table. It works!

The Creation Station is nice, but we would need to re-adjust ourselves to it. The way I see it, why re-adjust ourselves to a piece of equipment...when we can custom-make a piece of equipment that is adjusted to ourselves, and gives us the optimal positioning. (For our size and frames).

The Creation Station is a great tool. For some, it is EXACTLY what they needed. But for others, it is not. But in the is just another tool in the lampworkers arsenal.

We hope this post helps someone out, especially the VENTILATION STUFF. But sadly, we are still seeing soooooooooooooooooooooooo many folks with "ghetto-homey-don't-you-know-me" unsafe ventilation systems...and no one is mentioning this to them. I read, "Oooooo, that's cute". "Wow, I'm sure you're so happy with your new set-up". Your little corner of love is gorgeous", etc, etc... But yet the ventilation system is totally absent, as are the safety comments. (I guess they don't want to be the one that hurts someone by "bursting their bubble")..

I so much want to say something - but I also don't want to be glued to my PC to police all the errors. So I guess I'll do my part by posting our bead table journey, and hope someone reads it and takes our (and others) advice.

Thanks again to everyone who responded.

In Christ: Raymond

Last edited by RaymondMillbrae; 2008-12-19 at 8:08pm.
Reply With Quote
Old 2019-11-03, 11:38am
carolrouth carolrouth is offline
Junior Member
Join Date: Aug 15, 2017
Posts: 10

Still helpful 11+ years later!
Reply With Quote

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT -7. The time now is 6:29pm.

Powered by vBulletin® Version 3.7.5
Copyright ©2000 - 2023, Jelsoft Enterprises Ltd.
Your IP: