|
2018-03-06, 8:26am
|
You talkin to me?
|
|
Join Date: Jul 13, 2005
Location: Wisconsin
Posts: 558
|
|
Tutorial on pendants with our beads?
Hi everyone,
So, I've seen some people putting these on their beads to make them into a pendant or for joining to something else.
Does anyone know how this is done? I've seen some that are threaded too and wondered how they attach to the bead? Are they glued? As you can see, I am not much into making jewelry but I was inspired by some heart pendants and i'd like to make a few.
Thanks for your help.
__________________
Melissa
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
I work on a Minor burner, with an oxy-con and household natural gas
|
2018-03-06, 10:46am
|
Senior Member
|
|
Join Date: Dec 31, 2009
Posts: 504
|
|
They are indeed glued in, and were originally intended for half-drilled pearls and other gemstone beads. For lampworked beads, I would use a mandrel that was as close in size as possible to the shafts, possibly make the bead right on the end of the mandrel for that half-drilled look, clean the hole out with a dremel tool, and glue in the finding with a really good superglue. Just remember to get the hole really clean, or the glue won't be able to get a good grip. Or, if you don't want to work on the end of the mandrel, make a regular bead and use two of those findings. That way, you can use the bead as a link, or add dangly things onto one end. Either way, have fun!
|
2018-03-06, 1:03pm
|
You talkin to me?
|
|
Join Date: Jul 13, 2005
Location: Wisconsin
Posts: 558
|
|
Thank you, Robin! That's great info to know. I've also seen these types of findings of bead caps on the end. I like those too.
Thank you for the tips.
Quote:
Originally Posted by Robin Passovoy
They are indeed glued in, and were originally intended for half-drilled pearls and other gemstone beads. For lampworked beads, I would use a mandrel that was as close in size as possible to the shafts, possibly make the bead right on the end of the mandrel for that half-drilled look, clean the hole out with a dremel tool, and glue in the finding with a really good superglue. Just remember to get the hole really clean, or the glue won't be able to get a good grip. Or, if you don't want to work on the end of the mandrel, make a regular bead and use two of those findings. That way, you can use the bead as a link, or add dangly things onto one end. Either way, have fun!
|
__________________
Melissa
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
I work on a Minor burner, with an oxy-con and household natural gas
|
2018-03-08, 3:25am
|
|
Member
|
|
Join Date: Dec 31, 2017
Location: Lincoln, UK
Posts: 59
|
|
Superglue isn't really the best for this. All the varieties tend to shrink and get brittle with time. A better alternative is a 2-part epoxy. One I use a lot for my restoration work is Devcon - I don't know if that's available in the US, but I expect it is.
There are two types - the 5 minute one cures in about 10 minutes (!) and is probably sufficient for beads. The other is called 2-Ton, takes about 30 mins to harden off and about an hour to completely cure. This is as strong as the name implies. Especially as the hole in the bead won't be completely smooth, the Devcon will probably never come out.
It's a good idea to roughen-up the prong of the finding too, to provide a better key for the adhesive.
|
2018-03-09, 6:05pm
|
You talkin to me?
|
|
Join Date: Jul 13, 2005
Location: Wisconsin
Posts: 558
|
|
Thank you for this tip. I am doing a search now to see if anyone local carries it.
Quote:
Originally Posted by Handyann
Superglue isn't really the best for this. All the varieties tend to shrink and get brittle with time. A better alternative is a 2-part epoxy. One I use a lot for my restoration work is Devcon - I don't know if that's available in the US, but I expect it is.
There are two types - the 5 minute one cures in about 10 minutes (!) and is probably sufficient for beads. The other is called 2-Ton, takes about 30 mins to harden off and about an hour to completely cure. This is as strong as the name implies. Especially as the hole in the bead won't be completely smooth, the Devcon will probably never come out.
It's a good idea to roughen-up the prong of the finding too, to provide a better key for the adhesive.
|
__________________
Melissa
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
I work on a Minor burner, with an oxy-con and household natural gas
|
2018-03-17, 7:46am
|
Dix Harrison
|
|
Join Date: Mar 31, 2009
Location: KCKS - But my heart is in Scotland
Posts: 526
|
|
Another tip.
Be sure the bead hole is COMPLETELY DRY!!!!!
It can be tough to get every bit of moisture out of a half-drilled hole.
__________________
“Cometh the hour. Cometh the women.”
Facebook: Kansas Sky Studio Dix Harrison
|
2018-04-10, 2:20pm
|
Senior Member
|
|
Join Date: Apr 08, 2011
Location: NC
Posts: 1,687
|
|
what about using an air duster spray before glueing the component in? Or baking at 200DF for 30 to 45 minutes?
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Barbara
|
2018-04-12, 6:52am
|
Dix Harrison
|
|
Join Date: Mar 31, 2009
Location: KCKS - But my heart is in Scotland
Posts: 526
|
|
Air duster spray sounds like a great idea!
I have tried using a hairdryer, but ultimately, I shove a toothpick in the hole to check for moisture.
__________________
“Cometh the hour. Cometh the women.”
Facebook: Kansas Sky Studio Dix Harrison
|
2018-04-12, 4:17pm
|
|
Member
|
|
Join Date: Mar 04, 2006
Location: Portland, OR
Posts: 94
|
|
Is anyone making their own by soldering a loop, cap and post combination and really how far does the pin need to go down into the hole to secure it properly with the glue?
Not sure exactly how that's done but it might be worth a few try's. The sterling ones seem expensive and the post on most of these is quite short 3-5mm.
Thanks for any help on this.
Kathy
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2018-05-02, 7:57am
|
Junior Member
|
|
Join Date: Apr 28, 2017
Posts: 7
|
|
Where can I buy these kinds of findings? I'm new to this and would really like to turn my beads into pendants.
|
2018-05-02, 8:41am
|
|
Queen of the milo field
|
|
Join Date: Jul 30, 2012
Location: In the middle of US and the middle of forty acres
Posts: 1,885
|
|
__________________
Dance all you want, but keep one hand on the wheel.
Sometimes I swim, sometimes I sail, but mostly I just try to stay afloat.
|
2018-05-04, 7:10am
|
|
Heart of Flame
|
|
Join Date: Apr 28, 2010
Location: Ontario, Canada
Posts: 163
|
|
I'm wondering if there is a place to buy these that have a good sized post. Rio all has very small posts. I'm hoping for something that I could use in a 3/32 hole.
Thanks!
__________________
Darryle
If you wish to learn the highest truth, begin with the alphabet - Japanese Proverb
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2018-05-04, 8:15am
|
|
Loving learning
|
|
Join Date: Oct 11, 2010
Location: Florida
Posts: 11,654
|
|
If you are talking about beads with the through hole, have you considered just wiring them? And I have purchased interchangeable bails, so I can just switch one bead for another also, on Etsy but it has been a while so I can't remember the seller.
On the chance that you have never done any wire wrapping before, here is a short video showing a couple of ways. I usually just use wire, and make a small loop on the bottom, but the headpins make it even easier. I bought some little bails that I can hook on the loop I make if I want it to look more "finished" too.
https://www.youtube.com/watch?v=oRxiOGXfHiw
__________________
My current "hot" fantasy involves a senior discount on glass & tools!
|
2018-05-04, 8:18am
|
|
Loving learning
|
|
Join Date: Oct 11, 2010
Location: Florida
Posts: 11,654
|
|
I did an Etsy search on Glue in Bails, and these came up. There were more, this was just the first in the list that looked like your example.:
https://www.etsy.com/listing/5314930...r_gallery-1-26
__________________
My current "hot" fantasy involves a senior discount on glass & tools!
|
2018-05-16, 12:34pm
|
Senior Member
|
|
Join Date: Mar 14, 2015
Location: Moscow, Russia
Posts: 131
|
|
Melzip, I use 2 part epoxy to glue the findings in both sides of the hole, on this quick&bad shot you can see the findings (these are by Tierracast), the well used epoxy pack and the finished result with one of my HH "fuglies". You will need the bead hole to be a tiny bit wider than the part to be glued in, I do not remember the measurements, just ensure that your bare mandrel is approximately as thick as the insert. The bead release will make its job and the hole in the finished bead will be just right, The rest is easy - clean, rinse, dry the beads, mix equal (or as per instructions) 2 parts of the glue using something disposable - toothpick, piece of plastic, etc, use toothpick to put small amount of glue to the tip of the insert (not longer than 1/2 or 2/3 of the total length depending on how much free space you have between the side iof the hole and the insert because when you press the finding to the bead some glue will go up to the "cap" part and you do not want to spend time removing it). Press and hold, you may use a narrow piece of masking tape to fix the finding to the sides of the bead. Please note - 5 minutes refers not to the epoxy curing time but to the working time at given temperature conditions, allow at least 40 minutes or 1 hour after gluing in. Repeat on another side. Fresh epoxy can be removed from the fingers and the bead with lint-free cloth and acetone or nail polish remover. Hope it helps.
|
2018-05-16, 1:03pm
|
Senior Member
|
|
Join Date: Mar 14, 2015
Location: Moscow, Russia
Posts: 131
|
|
Wd2crv, have a look if Tierracast "links" would work for you. These are excellent for 3/32 and come in different lenths with loops on both ends or a ball on one end and a loop on another. It's not a glie-in product but it holds a bead with 3/32 hole really well and you can add bead caps, jump rings, bails, other components. Bead caps must have approproate hole to fit this component.
P.S. I'm not paid by Tierracast, unfortunately
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 2:24pm.
|