|
Studio -- Show us your studio setup |
![Old](lwe/statusicon/post_old.gif)
2016-12-09, 10:39pm
|
![accbyruth's Avatar](image.php?s=17611d525d71f2fed5313ca0e92969ad&u=34529&dateline=1399041871) |
Senior Member
|
|
Join Date: Jan 30, 2014
Location: Belleview, FL
Posts: 127
|
|
The studio in my new house
The work area:
New studio setup by Ruth Pletz, on Flickr
Main glass storage:
New studio setup by Ruth Pletz, on Flickr
Over flow glass and specialty glass storage:
New studio setup by Ruth Pletz, on Flickr
My mandrel holder that my roommate made out of some old cutting boards. This works so much better than the bowl of sand I was using.
image by Ruth Pletz, on Flickr
The only thing not pictured is the kiln which currently sits to the right of my main glass storage. I'll be moving it closer as soon as I can figure out where.
This is in the "Florida room" in the new house. I should be able to torch almost all year round.
|
![Old](lwe/statusicon/post_old.gif)
2016-12-09, 11:43pm
|
![KJohn's Avatar](image.php?s=17611d525d71f2fed5313ca0e92969ad&u=14203&dateline=1449370601) |
Slogan Challenged...
|
|
Join Date: Mar 21, 2009
Location: Maricopa, Arizona
Posts: 6,287
|
|
Yay, congrats on getting it all set up. Enjoy
__________________
Kristin ~
Facebook: To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Etsy: To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
![Old](lwe/statusicon/post_old.gif)
2016-12-09, 11:53pm
|
![accbyruth's Avatar](image.php?s=17611d525d71f2fed5313ca0e92969ad&u=34529&dateline=1399041871) |
Senior Member
|
|
Join Date: Jan 30, 2014
Location: Belleview, FL
Posts: 127
|
|
Thanks! It's been so long since I've been able to torch that I now have to re-learn a bunch of stuff, but I'm looking forward to it.
|
![Old](lwe/statusicon/post_old.gif)
2016-12-10, 5:10am
|
![beadmama's Avatar](image.php?s=17611d525d71f2fed5313ca0e92969ad&u=5712&dateline=1563310335) |
Senior Member
|
|
Join Date: Sep 22, 2006
Posts: 1,198
|
|
Looking good!!!
__________________
Becky
|
![Old](lwe/statusicon/post_old.gif)
2016-12-10, 9:11am
|
![Eileen's Avatar](image.php?s=17611d525d71f2fed5313ca0e92969ad&u=18436&dateline=1453941718) |
Loving learning
|
|
Join Date: Oct 11, 2010
Location: Florida
Posts: 11,654
|
|
Wow, that looks great!
And I ended up buying a rolling cart from Harbor Freight for my Chilipepper, but I'm not sure how big your kiln is and if that would work for you. I can push it out of the way until I need it, then pull it out away from everything a bit.
__________________
My current "hot" fantasy involves a senior discount on glass & tools!
|
![Old](lwe/statusicon/post_old.gif)
2016-12-10, 5:57pm
|
![accbyruth's Avatar](image.php?s=17611d525d71f2fed5313ca0e92969ad&u=34529&dateline=1399041871) |
Senior Member
|
|
Join Date: Jan 30, 2014
Location: Belleview, FL
Posts: 127
|
|
That's a great idea. I currently have it on one of those three shelf wire racks. As it's a regular guy from Glass Hive I think that might work.
Thanks for the great idea!
|
![Old](lwe/statusicon/post_old.gif)
2016-12-16, 3:08pm
|
Member
|
|
Join Date: Oct 04, 2016
Posts: 71
|
|
What sort of vent blower do you have? I like how simple the setup seems.
|
![Old](lwe/statusicon/post_old.gif)
2016-12-16, 8:29pm
|
![beachbeads's Avatar](image.php?s=17611d525d71f2fed5313ca0e92969ad&u=331&dateline=1237257044) |
Senior Member
|
|
Join Date: Jun 16, 2005
Location: Port Townsend, Washington
Posts: 865
|
|
Beautifu.l I would burn up thepeg board behind table though!
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
_
|
![Old](lwe/statusicon/post_old.gif)
2016-12-17, 7:26pm
|
![moushka's Avatar](image.php?s=17611d525d71f2fed5313ca0e92969ad&u=747&dateline=1379121412) |
Senior Member
|
|
Join Date: Jul 16, 2005
Location: Gainesville, FL
Posts: 450
|
|
That looks great = have an amazing time!
|
![Old](lwe/statusicon/post_old.gif)
2016-12-18, 7:59am
|
Senior Member
|
|
Join Date: Feb 02, 2010
Posts: 3,382
|
|
Setup looks great, it'll all come back to you in a jiffy.
__________________
ESC
Soft glass on a Minor/concentrator since 1996
|
![Old](lwe/statusicon/post_old.gif)
2016-12-20, 3:14am
|
![accbyruth's Avatar](image.php?s=17611d525d71f2fed5313ca0e92969ad&u=34529&dateline=1399041871) |
Senior Member
|
|
Join Date: Jan 30, 2014
Location: Belleview, FL
Posts: 127
|
|
Quote:
Originally Posted by notrhydon
What sort of vent blower do you have? I like how simple the setup seems.
|
My vent system is something we rigged up and are testing. I know folks have gone back and forth on the use of a box fan, but that is what I'm using. On the front of the box fan is what looks like a big wedge of cheese made out of cardboard. The vent tube (whatever you call it) is on the big end of the wedge. Running the fan on "3" pulls a lot of air through it. After trying all of the smoke tests and what not it all seems to work well. We do have a flange that takes the 6" hose to 8" but it isn't on yet.
The box fan is mounted to some wood that we cut so that it fits the window. That way I can pull it out of the window when I'm done and close it. Once we get a little bit more time we'll make the wedge out of wood and permanently attach it to the fan. It's currently being held on by gorilla duck tape (which also plugs any potential leaks).
I'll post pictures later today. I didn't realize that it wasn't in the photo originally.
Since I can't cut through the wall or permanently block the window, this is what works for me.
So far I think my cost for this is around $60 if not less. We already had the wood and tape. The fan was under $20 and the hose and two adapters were under $40.
|
![Old](lwe/statusicon/post_old.gif)
2016-12-20, 6:10am
|
![accbyruth's Avatar](image.php?s=17611d525d71f2fed5313ca0e92969ad&u=34529&dateline=1399041871) |
Senior Member
|
|
Join Date: Jan 30, 2014
Location: Belleview, FL
Posts: 127
|
|
Here is the entire setup:
Ventilation by Ruth Pletz, on Flickr
This is it not installed in the window. The hose itself isn't very bendy so the plastic container needs to be there to support it when it isn't in the window. I didn't want to have to mess with the hose as well as the fan.
Ventilation by Ruth Pletz, on Flickr
In the window - the fan is blowing outside. I have a window behind me that gets opened for intake.
Ventilation by Ruth Pletz, on Flickr
|
![Old](lwe/statusicon/post_old.gif)
2016-12-21, 11:15am
|
![bshelle's Avatar](image.php?s=17611d525d71f2fed5313ca0e92969ad&u=8355&dateline=1594659692) |
Shelarious
|
|
Join Date: Jul 18, 2007
Location: Cincinnati, OH
Posts: 1,953
|
|
Cool setup! Does it pass the smoke test? Box fans can sometimes not be enough power. I used one for awhile but it was not great. I ended up getting a hydroponic fan online and creating a similar set up as yours but with the hydroponic fan. The suction is amazing and I don't have to worry.
__________________
~Shelley
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
![Old](lwe/statusicon/post_old.gif)
2016-12-21, 11:12pm
|
![accbyruth's Avatar](image.php?s=17611d525d71f2fed5313ca0e92969ad&u=34529&dateline=1399041871) |
Senior Member
|
|
Join Date: Jan 30, 2014
Location: Belleview, FL
Posts: 127
|
|
Yes. It passes the smoke test. I'm always amazed when I watch it get pulled into the hose.
|
![Old](lwe/statusicon/post_old.gif)
2016-12-29, 3:37pm
|
Member
|
|
Join Date: Oct 04, 2016
Posts: 71
|
|
accbyruth - that looks super manageable! I'm trying to tidy up my vent system before I jump up from my hothead. Right now I've been using just a box fan slightly beyond and above my work surface. This looks like a far more reliable setup. Thanks.
|
![Old](lwe/statusicon/post_old.gif)
2016-12-30, 8:27pm
|
![accbyruth's Avatar](image.php?s=17611d525d71f2fed5313ca0e92969ad&u=34529&dateline=1399041871) |
Senior Member
|
|
Join Date: Jan 30, 2014
Location: Belleview, FL
Posts: 127
|
|
It can be a little unwieldy sometimes, but it works like a charm. Most of the time I like that I can remove it from the window so that it can be locked.
You also have to watch for the hose splitting when it gets moved around to much. After moving the fan into the window I check all of the tape to make sure none of it has unstuck. It doesn't really happen, but best to make sure. Of course there are many better ways of connecting things (like hose clamps) but sometimes you got to use what you have.
Ruth
|
![Old](lwe/statusicon/post_old.gif)
2017-11-12, 4:44pm
|
![accbyruth's Avatar](image.php?s=17611d525d71f2fed5313ca0e92969ad&u=34529&dateline=1399041871) |
Senior Member
|
|
Join Date: Jan 30, 2014
Location: Belleview, FL
Posts: 127
|
|
I've finally updated the ventilation system to something more permanent. Now, it stays in the window full-time, but could be removed it necessary. I purchased all of the duct pieces at Lowe's and the fan itself from Harbor Fright using a 20% off coupon. The fan airflow is 1380 cfm on low and 1590 cfm on high. The noise isn't too bad either. I just play my music louder. ![Smile](images/smilies/smile.gif) The end of the duct still drapes over the top of my work bench.
6D78F59B-77DF-4DB7-9868-BF530E9643ED by Ruth Pletz, on Flickr
|
![Old](lwe/statusicon/post_old.gif)
2017-11-12, 4:48pm
|
![Elegance_1's Avatar](image.php?s=17611d525d71f2fed5313ca0e92969ad&u=6342&dateline=1334857130) |
SSDD... go ahead, ask me!
|
|
Join Date: Dec 12, 2006
Location: Houston, TX
Posts: 2,287
|
|
That looks great!
__________________
BarbaraJ...my mind is what matters
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 1:25am.
|