|
Tips, Techniques, and Questions -- Technical questions or tips |
2008-03-12, 4:32pm
|
Copper Dragonfly Glass
|
|
Join Date: Sep 18, 2005
Location: Danville, IL
Posts: 98
|
|
Suggestions for black/white frit source?
Hello all,
I have a couple of threads in the Garage Sale seeking some black/white frit blends, but I thought I would try here as well
I have a special order for some earrings and I was planning on using my Spiral Dance Zebra frit, but I don't have enough. Does anyone know of any other suppliers that sell a black/white frit blend?
Thanks so much,
Danelle
|
2008-03-12, 7:19pm
|
|
Carpe beadum
|
|
Join Date: Sep 29, 2005
Location: Southeastern MA
Posts: 863
|
|
Shoot, honey. Make your own. Melt the end of an intense black rod into a ball. Flatten it into a thin paddle. Get it a bit hot again.....not to the point of melting it.....just to warm it up after chilling it by making it into a paddle. Plunge the paddle part into a glass of ice water. Voila! Frit! Do the same with a white rod. Use intense black because regular black tends to look rather purple as frit.
Just pour the water off then and drain on a paper towel.
__________________
Carolyn
__________________________
Soli Deo Gloria
|
2008-03-12, 11:06pm
|
Copper Dragonfly Glass
|
|
Join Date: Sep 18, 2005
Location: Danville, IL
Posts: 98
|
|
Hi Carolyn,
I may have to do just that, but I was hoping to find a blend similar to my Zebra frit that has 2 different white colors in it. I just wish I knew what the 2 colors are!
Danelle
|
2008-03-13, 3:53am
|
|
Carpe beadum
|
|
Join Date: Sep 29, 2005
Location: Southeastern MA
Posts: 863
|
|
There's only so many whites out there. Maybe you have it. Try making some frit with your whites and see if it matches. Good luck! Wish I could tell you where to look for it, but I usually only buy blends from Val Cox.
__________________
Carolyn
__________________________
Soli Deo Gloria
|
2008-03-13, 8:05am
|
Senior Member
|
|
Join Date: Jun 08, 2007
Location: Da Zone! (Phoenix Arizona)
Posts: 103
|
|
Quote:
Originally Posted by DanelleHenk
Hello all,
I have a couple of threads in the Garage Sale seeking some black/white frit blends, but I thought I would try here as well
I have a special order for some earrings and I was planning on using my Spiral Dance Zebra frit, but I don't have enough. Does anyone know of any other suppliers that sell a black/white frit blend?
Thanks so much,
Danelle
|
GG glass has a frit with black and white called, Granite. Perhaps that would work? Here's the link: http://ggglass.com/catalog.php?item=...Fcategory%3D16
Good luck!
~Triscia
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 3:26am.
|