Lampwork Etc.
 
Send a PM to CorriDawn!

LE Live Chat

Enter Live Chat

No users in chat


Frantz Art Glass & Supply

Caber Light


 

Go Back   Lampwork Etc. > Library > Tips, Techniques, and Questions

Tips, Techniques, and Questions -- Technical questions or tips

Reply
 
Thread Tools
  #1  
Old 2014-06-11, 9:39pm
Kristynadine Kristynadine is offline
Junior Member
 
Join Date: May 23, 2014
Posts: 9
Default Contaminated electroforming solution

Ive searched everywhere. Hey everyone!!!!! I have a question, not sure if this exact thing has been covered. I keep having the salmony thing happen to my electroformed pieces and ive done everything through reading threads and ive narrowed it down to contaminated solution. How to i replenish the solution for proper electroforming??? Ive run it through filters, added brightener and even run it through more filters with charcoal in the middle of two filters. What do i do now? How do i restore the solution after it has been contaminated if ive tried the other things and they arent working. Ive read that you should be able to use your solution as long as you need. Ive already looked at amps and all that stuff and im pretty sure its the solution that is contaminated with organic material or something else. Does anyone have any other suggestions besides brighteners, filters and charcoal? I have yet to add a little distilled water. Ill try that asap, but would that make a huge difference in the solution? Ive skimmed so many threads and people havent really talked about solution upkeep. What is the best way to revive contaminated solutions? Any advice is appreciated!!!
Reply With Quote
  #2  
Old 2014-06-12, 1:23pm
fourpawsglass's Avatar
fourpawsglass fourpawsglass is offline
Senior Member
 
Join Date: Sep 04, 2005
Location: Sterling, VA
Posts: 442
Default

In my mind, if its contaminated and you've filtered it, added brightener, and distilled water then perhaps you just need to get rid of it. Here are some other ideas - check your anode (is it thick enough) and clean the wire your items are hanging from. If it remains above the solution like mine, it can get corroded. I always clean them with a brass brush before hanging my items. I also clean where my contacts are so that they are connecting good. I have added distilled water and the brightener but if the solution really drops, then I add more of the solution.

I know you said you have the salmony outcome but does it crumble? What happens if you take a brass brush to it? Mine comes out a pinkish color but shines up to a brilliant shine. If it's crumbling, then I would also suspect your paint. Is it old? Who from? I recently purchased two jars from Rio and they are trash. I'm trying to get a refund. I have had wonderful success from the jar I purchased from Safer Solutions.

Let me know - hope this helps.
Reply With Quote
  #3  
Old 2014-06-13, 2:31pm
Kristynadine Kristynadine is offline
Junior Member
 
Join Date: May 23, 2014
Posts: 9
Default

You may be right about the paint. I get everything from rio. The first pieces i did were like pennies! Last few have been salmony and not crumbly. Im guessing ill just polish them for now. thank you!!! Ill keep you updated!
Reply With Quote
  #4  
Old 2014-06-14, 4:05pm
theglasszone's Avatar
theglasszone theglasszone is offline
I speak Murrini!
 
Join Date: Oct 12, 2006
Location: In a Glass House, CA
Posts: 9,170
Default

I'm reading everything I can about e-forming, and I'm with you FourPaws! If my solution goes south, I'm just gonna get another bottle from Rio and start over...

I'm doing almost all organic pieces, but I've been over the top anal about coating them in laquer first and then two coats of paint to keep them "sealed" and not pollute my solution. I've been using the coffee filters, too, between sessions and also have the pinkish result that shines to bright - no crumbling. I've been keeping the solution topped off with a bit of distilled H20 and a few drops of brightener.

Hope you get your problem worked out, Kristy, and for sure try Safer Solutions paint. I think it's fantastic!

De
__________________
~DeAnne~
I've got a murrini for that,'ya know!
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.


"Only a fool rushes to his own demise..." ~Zorro
Reply With Quote
Reply

Tags
electroforming, salmony, solution, upkeep


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump




All times are GMT -7. The time now is 6:31am.


Powered by vBulletin® Version 3.7.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Your IP: 18.97.14.89