Lampwork Etc.
 
Mountain Glass Arts

LE Live Chat

Enter Live Chat

No users in chat


Donate via PayPal to donate@lampworketc.com

Beads of Courage


 

Go Back   Lampwork Etc. > Library > Boro Room

Boro Room -- For Boro-related tips, techniques, and questions.

Reply
 
Thread Tools
  #1  
Old 2012-05-05, 1:38pm
CD Lampwork's Avatar
CD Lampwork CD Lampwork is offline
Hugh Hefner (instigator)
 
Join Date: Jun 10, 2005
Location: Louisiana
Posts: 236
Default Oxygen questions

Just curious. What are you using? How fast are you using it up? How much is it costing you?

Currently I'm on 5 oxy-cons. each running 2 1/2-3 lpm into a tank then to my barracuda. I'm happy with this set up for 104 and bullseye, but as I move into boro I'm pretty sure I'm gonna want tanks. The question is how big a tank and how fast I'd have to get it refilled. Looks like K tanks are the norm, but only getting a handful of hours out of a tank means a lot of time running around each week. So liquid oxygen? How much am I looking at and how long do you usually get? And do the gas companies have requirements as to where you can put a dewer(?)? I've got my propane outside on a brick porch under a porch roof. I'd be comfortable with ox. tanks out there as well. But again I've got very little experience with tanks and even less with liquid ox.

Yeah I know, I need to go out and talk to a gas company. But it's Saturday and I'm interested in your experiences. Thanks!
__________________
Greg (Deanna's husband)



To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Reply With Quote
  #2  
Old 2012-05-05, 8:07pm
Bunyip's Avatar
Bunyip Bunyip is offline
Pyromaniac
 
Join Date: Jun 27, 2006
Location: Out there on the interwebs
Posts: 1,784
Default

15 LPM should give you enough oxy for a lot of happy boro work, provided you have enough pressure. Brent Graber worked his magic on 2 M-15's (16 LPM total) I believe, though I think he has since gone liquid. You won't be making 2" marbles quickly, but then again, that's not so quick on a barracuda even on tanked. And the radiant heat from the barracuda in general, oy... My fingers look like raw meat if I rage too much...

If you go the K tank route, get 3 tanks (It's what I have). Best bet long term is "customer owned", preferably buy used tanks at a reasonable price rather than from the supplier at full retail for what amounts to used tanks (it's a racket). Legitimate customer owned tanks will not have anything stamped on the collar just below the valve - except on rare occasions when they will say 'customer owned' or something similar. Tanks with writing on the collar identifying a company may be considered stolen goods by an oxy provider. This is a bad thing and if you have a touchy oxy supplier things can go badly. While you will probably not be arrested the tank will most likely not be filled and may be confiscated when you try to have it filled.

The benefit of having 3 tanks is less trips to the oxy store, and you can get into a fairly simple routine: When you hook up tank #3, remember to go to the oxy store before you kill it. Working boro on the cuda's center fire only you're good for up to 10 hours on a tank (maybe 12 but that's pretty optimistic), depending on how conservative you are - I get more like 8 unless I'm working soft glass....and of course you get less if you run the outer ring or even if you're raging the center fire.

If you go the liquid oxy route, there's a lot to consider. I've done the research but have not used liquid oxy in my work except at other's shops. Here is what I've gleaned thus far: If you're not using enough oxygen, it may vent. Loudly. The neighbors will likely think this is a bad thing, perhaps even an emergency worthy of calling 911. Which would be a bad thing in itself. Next off is the "own it or rent it" dilemma, which I will leave to you after suggesting you try to find a used dewar... Finally, most oxygen providers will not deliver to a residential neighborhood, and if you're renting may not rent to you if they think or know it will be located in a residential area. This will vary by location. In most residential situations, my conclusion has been that it would be better to have a "customer owned" dewar and transport it yourself. I believe Trey Cornette went this route, and utilizes a small trailer for this. Ideally you could leave the dewar on the trailer, back it up to the hookup, and save a lot of hassles.

PS: When talking to oxygen suppliers, I would suggest calling around and getting prices multiple. If possible, don't identify yourself in this initial stage, but hint that you're thinking of SWITCHING suppliers from a competitor and were wondering what their prices were like. Whatever amount they give you initially will likely be a much higher rate than you should be paying. Make sure they are aware that you know that. I pay just under $10.00 a tank these days. Your quotes will be more than twice that, perhaps even triple unless you can establish that you know what you are talking about and foster a good working relationship with your supplier. I've heard it said by some that trinkets seem to smooth that path but I've yet to resort to that in my negotiations. One last hint: Save the guy who is closest and most convenient for last... that way you'll be armed with much more knowedge when opening negotiations.
__________________
Chris Scala

Fortune Cookie say, "When things go wrong, don't go with them!"

Current Glass-Melting Apparatus:
GTT Lynx powered by 2 5 LPM Oxycons and
a sexy Barracuda running pure tanked Oxy
Reply With Quote
  #3  
Old 2012-05-05, 10:03pm
LePatron LePatron is offline
is
 
Join Date: Jun 23, 2011
Location: Born in Canada. Made in USA.
Posts: 197
Default

Homefill.

All you need to do is sell a few concentrators and buy the Homefill top unit and a whip to your K tank. Problem solved for around $600-800.

p.s., I have two conecntrators for the homefill on the garage sale forum right now, brand new in the box. Most will work, but these are designed for it.

gl
Reply With Quote
  #4  
Old 2012-05-05, 10:07pm
LarryC LarryC is offline
Senior Member
 
Join Date: Mar 07, 2011
Location: Northern California
Posts: 2,023
Default

i get about 12 hours of mostly oxidizing runtime on my mirage off a K tank. i run the outerfire only about 10% of the time, though. i have a wholesale account and have swapped glass for tanks. i have a very friendly relationship with my supplier and get excellent service. I think its a sweet setup for me and have no plans to drop back to a room of concentrators any time soon. i would rather leave the oxy concentration to the pros and concentrate on producing great glass. the performance tradeoffs are too steep for me.
Reply With Quote
  #5  
Old 2012-05-06, 5:23am
CD Lampwork's Avatar
CD Lampwork CD Lampwork is offline
Hugh Hefner (instigator)
 
Join Date: Jun 10, 2005
Location: Louisiana
Posts: 236
Default

Thanks, all very useful information.
__________________
Greg (Deanna's husband)



To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Reply With Quote
  #6  
Old 2012-05-06, 6:11am
Trey Cornette's Avatar
Trey Cornette Trey Cornette is offline
DSDWC
 
Join Date: Nov 04, 2005
Location: Born in the backwoods. Raised by a bear
Posts: 1,268
Default

I am averaging 50+ days on a dewar of LOX. I work some most every day but am gone for up to 5 days at a time. I vent off the pressure before I leave and usually the tank is not venting when I return. I have yet to experience the loud venting. I don't need to use the pressure builder so when it does vent it is just a slow low hiss.
I had all the concerns you have and found that none of them where really valid for my usage.
My dewar is a 180L with a 350 psi vent. I will be trading up to a 500psi vent as soon as they have one. I started with a 230psi which vented a bit more.
When I switched over from my re compressor system to lox the results where amazing. I felt as though I had been working with one hand tied behind my back on generated O2.
I get my tank refilled rather than trading out. I purchased a trailer just for this purpose and the dewar never leaves the trailer.
More than happy to answer any questions or address any concerns. Just drop me a pm.
Go LOX. You will be super happy!!!!!
__________________

To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.




To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Reply With Quote
  #7  
Old 2012-05-11, 11:22am
AmorphousDesigns's Avatar
AmorphousDesigns AmorphousDesigns is offline
Wonder-wench
 
Join Date: Aug 09, 2010
Location: land of milk & honey
Posts: 1,104
Default

some people choose to run the inner fire off oxycon(s) and tanked for the outer fire to save $$ on O2 refills. I just set my new torch up this way, so I don't have any idea how long my 280 cf tank will last. I also like this concept as it will allow me to work even when my tank is empty just using the oxycons (it's good for patience building anyway).
__________________
Elizabeth

To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Reply With Quote
  #8  
Old 2012-12-10, 5:36pm
Dr Bill Dr Bill is offline
No Longer an LE Member
 
Join Date: Sep 09, 2012
Posts: 173
Default

bye

Last edited by Dr Bill; 2013-08-03 at 7:48am.
Reply With Quote
  #9  
Old 2012-12-10, 7:21pm
toothpayne's Avatar
toothpayne toothpayne is offline
Co-owner
 
Join Date: Jun 22, 2009
Location: South Jordan Utah
Posts: 313
Default

We work our Carlisle Hellcat off 5 AirSep Oxycons and can make up to 3" marbles without trouble
__________________

To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.

PHONE: (385) 237-3365
OXYGEN 24 HOUR TEXT LINE: (801) 949-0575
LAMPWORKING 24 HOUR TEXT LINE: (801) 949-0576
Reply With Quote
  #10  
Old 2012-12-10, 7:50pm
toothpayne's Avatar
toothpayne toothpayne is offline
Co-owner
 
Join Date: Jun 22, 2009
Location: South Jordan Utah
Posts: 313
Default

Dr. Bill has joined our product review panel. I can't wait to see what he can do with this oxygen set up now that he has some real American-made glass to work with.
__________________

To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.

PHONE: (385) 237-3365
OXYGEN 24 HOUR TEXT LINE: (801) 949-0575
LAMPWORKING 24 HOUR TEXT LINE: (801) 949-0576
Reply With Quote
  #11  
Old 2012-12-11, 7:09am
istandalone24/7's Avatar
istandalone24/7 istandalone24/7 is offline
Senior Member
 
Join Date: Mar 14, 2012
Location: Bennington, VT
Posts: 1,776
Default

dr bill, why would you put 5 LOX tanks together? it's overkill....nobody needs 5 lox tanks to power a minor.

again i think your confused and you have 5 compressed oxy tanks and your getting your terminology mixed up.

what do your tanks look like? that should go a long way towards clearing this up because again, noboday needs 5 lox tanks for a minor burner.
__________________
now i've got a Mirage
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Reply With Quote
  #12  
Old 2012-12-15, 7:11pm
Ed_Slawson's Avatar
Ed_Slawson Ed_Slawson is offline
Playing with Fire!
 
Join Date: Feb 23, 2007
Location: Rockland, Maine
Posts: 192
Default

We have been using Dewars for over 8 years now... all I can say is that we would never go back to tanks or generators.

Dewar v/s K Tank comparison
180 liter dewar- capacity

We get 4-6 weeks out of a GP-50 dewer (350 psi blowoff) (180 liters), with delivery, hazmat charges, etc, and it costs us $118 a refill. Lease is $300 per year. If we work 3-4 hours a day, we hardly ever blow any off. Our k tank charge is close to $30. each! The dewer is = to 21+ k tanks! Cost wise there is no comparison.

Labor wise there is absolutely no comparison.

180-some 200 liters dewar = to 21-24k tanks

21 k tanks = $ 630.00 (average)

Dewar = 118.00 (includes delivery and all other hazmat, etc. costs)

each k-tanks amount of dewer = $5.62 (average)

For the past year the newer GP-50 dewars have been 200 liters with blow offs of 350 or 500psi... they last even longer and are = to more k tanks.

Back in July of 2012 we were on dewar # 74, the following figures were up to that time:

Dewar # 74 - so far •••• approx = to 1,680 k tanks !!
at $28.50 per k-tank = they would have cost us $46,398.00 ++ gas and time driving to replace them.
74 dewars = cost us about about $9,472.00
so far we SAVED appox. $36,926.00 using dewars !!!

We are now on dewar #81.

The other huge difference from concentrators or generators is that the LOX purity is about 99.5 %. This makes a HUGE difference with many of the boro colors, and all of the silver bearing colors.

We've had a Kobuki, 2 mirages, a delta magnum, 2 phantoms, a couple of carlise ccs, and other assorted torches going all at the same time! Try that with anything other than LOX!

Out of 81 dewars we have only had one screamer, and that was a beat-up ancient gp-45. We had 2 others that blew off almost continually but quietly, and the Oxy company did not charge us for them. Most blow off very quietly, and for a very brief period.

This has been our experience thus far...

-Ed-
__________________

To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.

Playing with Fire!
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Reply With Quote
  #13  
Old 2012-12-16, 5:49am
Dragonharper's Avatar
Dragonharper Dragonharper is offline
Now part of the Dark Side
 
Join Date: Jul 02, 2010
Location: North Central PA
Posts: 966
Default

LOX is definitely the way to go if you use a lot of O2. I had a full time studio I'd definitely consider LOX, by the way CMoG use LOX they have many dewars, but then again they have O2 hard piped using 2 inch piping. Even with one torch going 8 hrs a day LOX can be the most cost effective way to go, unless you live way out in the boonies.
__________________
Roy
Hot glass does not crack.
Unless it is glowing and drippy, hot glass looks like cold glass.
Reply With Quote
  #14  
Old 2012-12-21, 5:54pm
drew1492 drew1492 is offline
Member
 
Join Date: Oct 19, 2011
Posts: 53
Default

If you dont like LOX we were running two herbies off of the big compressor and before that it was a Herbie and a Mirage. There are some options if you don't want to go LOX but if you have much more than Two big torches running full time it seems to be the way to go. We would run it about every 4 days overnight and it kept up just fine.

Reply With Quote
  #15  
Old 2012-12-27, 9:28am
Cosmo's Avatar
Cosmo Cosmo is offline
ManBearPig
 
Join Date: Jun 28, 2005
Location: Roanoke, VA
Posts: 8,540
Default

Quote:
Originally Posted by drew1492 View Post
If you dont like LOX we were running two herbies off of the big compressor and before that it was a Herbie and a Mirage. There are some options if you don't want to go LOX but if you have much more than Two big torches running full time it seems to be the way to go. We would run it about every 4 days overnight and it kept up just fine.

More info on that setup please.

I haven't turned a torch on since April because oxygen isn't available to me any more. I'm looking for alternatives for my CC.
__________________

To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Reply With Quote
  #16  
Old 2012-12-27, 12:13pm
drew1492 drew1492 is offline
Member
 
Join Date: Oct 19, 2011
Posts: 53
Default

It can fill a K tank to 2000 psi in under 10 hours. Uses about 500w of power. You will need about 10lpm at about 10psi to feed it. I ran it off a 5lpm and 10lpm concentrator with the pressure bumped up a bit.

They are pricey you are looking at about $3k but if you cant keep liquid or have oxy delivered it is a nice option. I have used it for around 8 months I had to re seal the gauge once... I had it hooked up to 4 K tanks all the time and we would just fill to 1000-1500psi. In oxy costs if I was using K tanks at $24 I have probably just about broken even on it. It is nice to just leave everything set up and only turn it on when you are low. I would buy it again in a heartbeat I took a risk though not really knowing what I was getting at first.

It runs off standard voltage as well no 220 needed.
Reply With Quote
  #17  
Old 2012-12-27, 1:37pm
Cosmo's Avatar
Cosmo Cosmo is offline
ManBearPig
 
Join Date: Jun 28, 2005
Location: Roanoke, VA
Posts: 8,540
Default

What brand is it? Where did you get it?

Considering K tanks here are usually over $40 (and that's at the cheaper place) that may well be a good option for me.
__________________

To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Reply With Quote
  #18  
Old 2012-12-31, 12:48pm
s13 s13 is offline
Junior Member
 
Join Date: Sep 04, 2012
Posts: 8
Default

Quote:
Originally Posted by drew1492 View Post
If you dont like LOX we were running two herbies off of the big compressor and before that it was a Herbie and a Mirage. There are some options if you don't want to go LOX but if you have much more than Two big torches running full time it seems to be the way to go. We would run it about every 4 days overnight and it kept up just fine.

We have the same concentrator. Would you mind sharing how you hooked that up to your k tank?
Thank you! Newbie here!
Reply With Quote
  #19  
Old 2012-12-31, 12:57pm
LarryC LarryC is offline
Senior Member
 
Join Date: Mar 07, 2011
Location: Northern California
Posts: 2,023
Default

Compressor is here....

http://www.energetic-tech.com/oxygen...ee-compressor/
Reply With Quote
  #20  
Old 2012-12-31, 3:18pm
s13 s13 is offline
Junior Member
 
Join Date: Sep 04, 2012
Posts: 8
Default

Quote:
Originally Posted by LarryC View Post
So I need this and the invacare system to fill one of our K tanks?
(we have the invacare)
Reply With Quote
  #21  
Old 2012-12-31, 5:00pm
drew1492 drew1492 is offline
Member
 
Join Date: Oct 19, 2011
Posts: 53
Default

Quote:
Originally Posted by s13 View Post
So I need this and the invacare system to fill one of our K tanks?
(we have the invacare)
Any oxycon that puts out the needed pressure and output works. I use two oxy cons with it. There are two different systems in the photo.
Reply With Quote
  #22  
Old 2012-12-31, 5:39pm
LarryC LarryC is offline
Senior Member
 
Join Date: Mar 07, 2011
Location: Northern California
Posts: 2,023
Default

Quote:
Originally Posted by s13 View Post
So I need this and the invacare system to fill one of our K tanks?
(we have the invacare)
are you selling these, drew?
Reply With Quote
  #23  
Old 2012-12-31, 6:54pm
s13 s13 is offline
Junior Member
 
Join Date: Sep 04, 2012
Posts: 8
Default

Quote:
Originally Posted by drew1492 View Post
Any oxycon that puts out the needed pressure and output works. I use two oxy cons with it. There are two different systems in the photo.
This one is pretty strong. I just have no idea how to hook it up to the K tank. Do you have any idea how to do this? What I need to purchase?
Thank you! (Newbie here!)
Reply With Quote
  #24  
Old 2013-01-07, 11:59am
Bunyip's Avatar
Bunyip Bunyip is offline
Pyromaniac
 
Join Date: Jun 27, 2006
Location: Out there on the interwebs
Posts: 1,784
Default

$30-$40.00 per K tank? Ouch. Liquid is definitely the way to go then....Not that it isn't the way to go anyway.
__________________
Chris Scala

Fortune Cookie say, "When things go wrong, don't go with them!"

Current Glass-Melting Apparatus:
GTT Lynx powered by 2 5 LPM Oxycons and
a sexy Barracuda running pure tanked Oxy
Reply With Quote
  #25  
Old 2013-01-14, 9:17pm
drew1492 drew1492 is offline
Member
 
Join Date: Oct 19, 2011
Posts: 53
Default

Quote:
Originally Posted by LarryC View Post
are you selling these, drew?
I don't sell homefills anymore I could help you out with a HK compressor if you wanted one. The only homefill thing I do anymore is sell whips if someone needs one.
Reply With Quote
  #26  
Old 2013-01-15, 5:00pm
khan khan is offline
Member
 
Join Date: Jan 12, 2012
Posts: 79
Default

Drew,
How much do you get for a whip?
And do they connect to the Quick connect that is on the concentrator? If it does where can a person get those connecters that fit in to the quick connect?

Thanks
Khan
Reply With Quote
  #27  
Old 2013-02-01, 9:18am
borowalla borowalla is offline
borowalla
 
Join Date: Jan 30, 2013
Location: NE and VT
Posts: 17
Default

I'm the maker of the High Volume Oxygen systems. I'd like have a dialog about it and answer any questions people might have about how it works.. Thanks
Marc Kornbluh
Reply With Quote
  #28  
Old 2013-02-01, 9:46am
deb tarry deb tarry is offline
Senior Member
 
Join Date: Jan 29, 2009
Posts: 1,958
Default

Sweet chat away Marc
seems there is interest for the smaller home fill type of system and for the larger system that Drew is using now. I for one have one of the smaller systems that Drew used to sell love it but I am seeing a need to go with something bigger as my oxygen consumption is going up. I live way out of town and a k tank runs me 50.00 to 75.00 per tank and I am not sure that liquid oxy is an option. Post a link to your web site
__________________

To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Reply With Quote
  #29  
Old 2013-02-01, 10:17am
istandalone24/7's Avatar
istandalone24/7 istandalone24/7 is offline
Senior Member
 
Join Date: Mar 14, 2012
Location: Bennington, VT
Posts: 1,776
Default

nice! i've seen those systems advertised....and if only i had the money i'd buy one. oxycons are great....unless your studio is in an unheated garage during the winter, which mine is.
i've got a homefill which is great, but i have to lug the k tanks up and down the cellar bulkhead stairs to fill it, which for one person who only weights 165lbs is tough.

i really covet those hv systems! i'd love to hear more about them too.
__________________
now i've got a Mirage
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Reply With Quote
  #30  
Old 2013-02-01, 9:56pm
GlassAlias GlassAlias is offline
Senior Member
 
Join Date: Sep 13, 2012
Location: Albany, NY
Posts: 172
Default

@borowalla - Start a thread. Im sure tons of peoples are very interested in hearing more.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump




All times are GMT -7. The time now is 4:53am.


Powered by vBulletin® Version 3.7.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Your IP: 35.171.159.141