|
2012-05-11, 3:40pm
|
|
Member
|
|
Join Date: Nov 28, 2005
Location: CHARLOTTE +/-
Posts: 52
|
|
Minor dissipator fin
Does anybody know if its possible to replace the dissipator fin thing on a Minor? Where can I get one? mine is melted, got misaligned, and it's interfering with the flame...
thanks,
stacy
|
2012-05-11, 3:57pm
|
Cave Dweller
|
|
Join Date: Mar 29, 2012
Posts: 275
|
|
You can call Nortel @ Tel: 716-852-2685
I'm sure they can help.
Note: you do not need that heat sink.
Look at this picture:
That is your Minor torch on top and it does not have the heat sink.
|
2012-05-11, 10:14pm
|
|
Dynamic Duo
|
|
Join Date: Aug 13, 2009
Location: Oakland, CA
Posts: 1,605
|
|
You should be able to get that off your minor, ream it out and replace it around the torch.
But your torch itself should always protrude out the end of these fins, by about 1/2 inch or so. It never should have been down within the 'fins'. Sometimes they do get displaced....
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. . To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. . To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. . To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. . To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. . To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2012-05-11, 10:34pm
|
Cave Dweller
|
|
Join Date: Mar 29, 2012
Posts: 275
|
|
Quote:
Originally Posted by flaming_fools
You should be able to get that off your minor, ream it out and replace it around the torch.
But your torch itself should always protrude out the end of these fins, by about 1/2 inch or so. It never should have been down within the 'fins'. Sometimes they do get displaced....
|
The heat sink doesn't do anything, it's 99.99% for looks.
I'm not making this up, Peter Norton, the guy that designed the
torch, told me this himself.
|
2012-05-11, 11:01pm
|
Senior Member
|
|
Join Date: Apr 08, 2011
Location: NC
Posts: 1,687
|
|
On my torch, same thing happening - the weight of the hoses are pulling it backwards and thereby pushing the fin forward so that you cannot see the flame the way you should. I could not move my fins forward at all, but I could move them backwards by hitting them with a hammer (gently).
Obviously, you'll want to drain your lines before you attempt to fix this.
I'm in need of doing it again, and will look for a longer screw to go through the base (side to side), some lock washers, and probably some Loctite to help it stay where it should.
Yours and mine aren't the only ones doing this, either. The place where I take classes has 3 out of 8 torches just like yours, with the candles totally hidden inside the fin casing.
Barbara
|
2012-05-12, 9:46am
|
|
Curmudgeon Engineering
|
|
Join Date: Feb 15, 2006
Location: Near Seattle, WA
Posts: 1,723
|
|
First of all do not put any sort of locktite stuff on your torch barrel to hold the fin piece in place. If it does move later when hot you will never get it back in place when cool. The weight of the hoses have no bearing on moving the finned piece unless the finned piece is held stationary and the hoses and torch manifold and barrel are free to move. The back end of the torch with the valves and the barrel are supported by the stand and base and that carries the weight of the hoses.
|
2012-05-12, 10:21am
|
|
Member
|
|
Join Date: Nov 28, 2005
Location: CHARLOTTE +/-
Posts: 52
|
|
barbara-
where do you take classes?
stacy
|
2012-05-12, 1:35pm
|
Senior Member
|
|
Join Date: Apr 08, 2011
Location: NC
Posts: 1,687
|
|
Cheng,
I wasn't proposing that Loctite be used on the fin, only on the nut and screw.
And, yes, the weight of the hoses is definitely what is pulling the whole torch backwards and allowing the fin to move forward.
The slippage is gradual, over time, but it is happening for the reasons I stated.
Several people have already backed me in this theory, and I have seen other Minors and Mega Minors do the same thing.
Barbara
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Barbara
|
2012-05-12, 1:40pm
|
Senior Member
|
|
Join Date: Apr 08, 2011
Location: NC
Posts: 1,687
|
|
Stacy, sent you a PM.
Barbara
|
2012-05-12, 2:12pm
|
Cave Dweller
|
|
Join Date: Mar 29, 2012
Posts: 275
|
|
The really simple way to handle this is to call Peter Norton at Nortel.
I have talked to him many times, he's a nice guy.
Ask him if you need the heat sink, he will tell you it is okay to run
the torch without it.
When in doubt, talk to the man that designed the torch.
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2012-05-12, 2:44pm
|
|
Curmudgeon Engineering
|
|
Join Date: Feb 15, 2006
Location: Near Seattle, WA
Posts: 1,723
|
|
I misunderstood; sorry.
|
2012-05-12, 3:09pm
|
Senior Member
|
|
Join Date: Apr 08, 2011
Location: NC
Posts: 1,687
|
|
I have put in a written note to Nortel, and it is totally my fault that I have not gotten back to them.
Barbara
|
2012-05-13, 6:01am
|
|
Member
|
|
Join Date: Nov 28, 2005
Location: CHARLOTTE +/-
Posts: 52
|
|
thanks for all your replies!
stacy
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 7:32pm.
|