|
Tips, Techniques, and Questions -- Technical questions or tips |
2013-03-13, 12:56pm
|
|
Senior Member
|
|
Join Date: Nov 29, 2007
Location: Mid-Atlantic
Posts: 408
|
|
Making your own mandrels?
I know I've seen a thread on this info, but a search did not find it, so I'd appreciate any help.
I visited an AirGas store where they had TIG rods, but I wasn't sure which ones to buy. I wanted the 1/16" inch size but it came in 316 or 308, which is the 'tencil' strength or something...Does it make a difference which ones I get?
So once I buy them, I assume I just cut to length, then grind off the nubs caused by the clippers? Anything else?
Thanks in advance!!
Judy
|
2013-03-13, 1:02pm
|
|
I fart diamonds
|
|
Join Date: Jun 14, 2005
Location: Altamonte Springs, FL
Posts: 3,893
|
|
308 is cheaper. For our purposes, it works fine. (It's what I buy unless 316 is super cheap, which it never is any more.)
__________________
-Shawnette the original "everybody get a grip" girl
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2013-03-13, 1:07pm
|
|
Senior Member
|
|
Join Date: Nov 29, 2007
Location: Mid-Atlantic
Posts: 408
|
|
Yay! Thanks for your quick response, Shawnette! I'm taking a class at our local community college and have access to a cold shop with a grinder, so I thought take advantage of that.
Judy
|
2013-03-13, 1:09pm
|
|
I'm a lilac!
|
|
Join Date: Jun 09, 2005
Location: Portland, Oregon
Posts: 8,793
|
|
308 is fine unless you work really hot, in which case you may have more trouble with it warping. I tried it once & ended up giving a lot of 1/16" mandrels away!
__________________
-Kalera
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. * To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2013-03-13, 1:13pm
|
|
Senior Member
|
|
Join Date: Nov 29, 2007
Location: Mid-Atlantic
Posts: 408
|
|
That's good to know Kalera! Thanks. So, the 316 better for hotter? I usually don't work 'hot', but sometimes it happens. I don't know the price difference yet, so I'll take that into consideration.
Thanks again!
Judy
|
2013-03-13, 3:06pm
|
|
Wonder-wench
|
|
Join Date: Aug 09, 2010
Location: land of milk & honey
Posts: 1,104
|
|
I got 1/16" 316 off Amazon. DH cut it with wire cutters (a bit hard), I cut some with my dremel diamond cut off wheel.
For my self I just rubbed the ends on concrete to remove burrs, bur for trade or sale I used the dremel with a diamond bit to round the ends off a little neater.
__________________
Elizabeth
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2013-03-13, 3:31pm
|
Senior Member
|
|
Join Date: May 27, 2008
Location: Albion NY
Posts: 517
|
|
A grinder may not be the best option depending on how coarse the wheel is, a lot of the 3/32 I grind on a medium 80 grit wheel bench grinder. Over time it groves the wheel and reshapeing the wheel can be a pain.
The thinner 1/16 works better for me just to use a disk sander.
Your welding shop probibly has a better price per ten lbs box then buying it repackaged in smaller lots or by the piece.
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2013-03-13, 3:43pm
|
|
Senior Member
|
|
Join Date: Nov 29, 2007
Location: Mid-Atlantic
Posts: 408
|
|
Thanks, Alaska for the melting temp info, and Elizabeth for the Amazon price. I wouldn't have thought to look there! I'll have to compare it to our AirGas store.
Judy
|
2013-03-13, 3:51pm
|
|
Senior Member
|
|
Join Date: Aug 01, 2005
Posts: 2,159
|
|
Get a cheap set of bolt cutters from Harbor Freight to cut your mandrels, then smooth the ends with either a grinding bit on a Dremel or use a shop grinder. I find that 316 lasts a little longer in the 1/16 size, especially at boro temps.
Robert
__________________
Robert Simmons
(Former) Director for Bead Donations
Beads of Courage, Inc.
|
2013-03-13, 4:14pm
|
|
offically down under
|
|
Join Date: Dec 22, 2005
Location: Sydney, Australia
Posts: 3,131
|
|
I have the 12" bolt cutters from Harbor Freight and they cut the 2.4 mm mandrels just fine. I guess I never got the memo about smoothing the ends but the mandrels work just fine as long. I've said it before and I'll say it again, I'm lazy and if I don't have to do something, I won't.
__________________
Tammy
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2013-03-13, 4:18pm
|
|
Senior Member
|
|
Join Date: Nov 29, 2007
Location: Mid-Atlantic
Posts: 408
|
|
I think I have to re-evaluate my grinding options...the tools in the cold shop are, I believe, more for glass....I don't want to wreck anything by using metal on them. Maybe concrete is my better option since that would be hard to ruin and these aren't for resale.
Losthelm, you're right, I looked online and the 10 lbs was a lot less than 1lb. Amazon is the cheapest, but I'd be paying shipping.
Judy
|
2013-03-13, 6:49pm
|
Senior Member
|
|
Join Date: May 27, 2008
Location: Albion NY
Posts: 517
|
|
Often glass grinding wheels are diamond or carbide both are very hard materials.
I would ask who ever supervises the shop. The worst they say is no.
You really only need the ends finished enought to be safe and not bind when you remove the beads.
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2013-03-13, 6:52pm
|
|
Senior Member
|
|
Join Date: Mar 29, 2009
Location: Northern VA
Posts: 165
|
|
I got a cheap grinder with 3" wheels from harbor freight. I use it to smooth the ends of my mandrels. I by mine at my local oxygen supplier. They carry a variety of sizes in 316 ans 308. I even special ordered 10 lbs of 5/64" ones to use with my Zoozi presses since this is the size she recommends. I shared these with friends.
|
2013-03-13, 7:19pm
|
|
Senior Member
|
|
Join Date: Nov 29, 2007
Location: Mid-Atlantic
Posts: 408
|
|
Uh oh...you're giving me an excuse to visit Harbor Freight! I did find the rods locally at our AirGas...
Thanks everyone!
Judy
|
2013-03-13, 11:40pm
|
Naysayer
|
|
Join Date: Sep 22, 2009
Posts: 1,203
|
|
I just scrape the ends a bit with coarse sandpaper at the same time I'm scuffing them up for first use, for 1/16th anyways. 3/32 I buy from losthelm lol!
|
2013-03-14, 6:32am
|
|
Senior Member
|
|
Join Date: Nov 29, 2007
Location: Mid-Atlantic
Posts: 408
|
|
Wow...I checked your mandrel link, losthelm....great price and quantity!!!
Judy
|
2013-03-14, 7:43am
|
Senior Member
|
|
Join Date: May 27, 2008
Location: Albion NY
Posts: 517
|
|
Running sales though PM or Email makes things a bit easier, Ebay can be a pain if people want more than one size.
I have a few hours set aside saterday to setup and Etsy shop. hopefuly I can get some decent pictures outside.
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2013-03-14, 11:37am
|
|
Somewhat out there!
|
|
Join Date: Aug 26, 2009
Location: Esko Minnesota
Posts: 735
|
|
I use a metal file on the burrs. Cleans them up just fine. Almost like using a nail file
__________________
Julianne To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2013-03-14, 1:58pm
|
|
one day at a time
|
|
Join Date: Jun 27, 2005
Location: We are MOVING!!!
Posts: 8,319
|
|
The best way to cut them is with a pair of fence pliers aka fencing pliers. It makes a big difference. The cut is clean and slightly diagonal, so the ends are easier to file smooth. These pliers "snap" rather than cut, and even with my weak grip (muscle and nerve damage rt forearm), I can manage it.
Ebay has them. Here's an example of what they look like: http://www.ebay.com/itm/10-1-2-FENCE...item337fc21dd9
__________________
You live in a world of money. Money means choices. No money, no choices. Welcome to reality.
Melody (Marlee Matlin) from Switched at Birth
|
2013-03-27, 10:09am
|
|
Senior Member
|
|
Join Date: Apr 09, 2010
Location: Iowa
Posts: 542
|
|
Just a quick question........
Why stainless? Is there a reason why regular steel doesn't work?
|
2013-03-27, 11:23am
|
|
Senior Member
|
|
Join Date: Feb 15, 2006
Location: In my Studio
Posts: 1,811
|
|
I use a chop saw with metal blade wheel used for cutting metal . I can cut lots(bundle) that way.I measure and mark and chop. Just watch out for the fingers,don't get them in the way. Then grind on a wheel.Be sure and wear apron so nothing flies and hits you. use safety glasses also.
Janet
|
2013-03-27, 3:52pm
|
|
I fart diamonds
|
|
Join Date: Jun 14, 2005
Location: Altamonte Springs, FL
Posts: 3,893
|
|
You can use steel temporarily but it rusts and your beads will stick.
__________________
-Shawnette the original "everybody get a grip" girl
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2013-03-27, 4:01pm
|
|
Unmedicated since '62
|
|
Join Date: Jan 18, 2009
Location: Hunter Valley, Australia
Posts: 5,907
|
|
Quote:
Originally Posted by tammydownunder
I have the 12" bolt cutters from Harbor Freight and they cut the 2.4 mm mandrels just fine. I guess I never got the memo about smoothing the ends but the mandrels work just fine as long. I've said it before and I'll say it again, I'm lazy and if I don't have to do something, I won't.
|
same, i just cut mine with a big pair of bolt cutters - you'll find you get a better cut with no sharp edge (or not much) if you use really big bolt cutters, the smaller ones tend to bend the end slightly
__________________
Deb
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. - my 17yo sons first novel
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. - download, get organised, enjoy
|
2013-03-28, 2:57am
|
|
Run Free Sweet Boy
|
|
Join Date: Jan 29, 2008
Location: Orlando, Fl.
Posts: 2,194
|
|
I have found the easiest way for me to cut and debur my mandrels is using the corner of my grinding wheel. I mark the 308 or 316 welding rods with a sharpie. Turn on my bench grinder and use the corner or the wheel. I slowly turn the mandrel until it cuts through, takes maybe 15 seconds or so, depending on thickness. No burs, no hand strain from using cutters, no broken dremel wheels.
__________________
NEW FLAMINGO BEACH BEAD TUTORIAL AVAILABLE NOW.CHRISTMAS ORNAMENT AND ICICLE TUTORIAL, VISIT MY ETSY SHOP AT To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
"It's not what you have, it's who you are."
|
2013-03-28, 7:18am
|
Senior Member
|
|
Join Date: Jul 14, 2006
Location: Northern Virginia
Posts: 2,366
|
|
I use a (fishing) hook sharpener to get rid of mandrel burrs, similar to this one: http://www.orvis.com/store/product.aspx?pf_id=2T5T
They're portable and inexpensive and work well.
Mimi
|
2013-03-28, 3:49pm
|
Senior Member
|
|
Join Date: Jun 17, 2009
Location: Bay Area, CA
Posts: 307
|
|
I've been wondering how many 12" mandrels you can get from a pound of 1/16" rods and/or a pound of 3/32" rods. Does anyone have a ballpark figure?
Thanks!
|
2013-03-28, 4:09pm
|
|
I fart diamonds
|
|
Join Date: Jun 14, 2005
Location: Altamonte Springs, FL
Posts: 3,893
|
|
Quote:
Originally Posted by brendah
I've been wondering how many 12" mandrels you can get from a pound of 1/16" rods and/or a pound of 3/32" rods. Does anyone have a ballpark figure?
Thanks!
|
A lot! Approx 96 1/16" and 42 3/32". (Just a guesstimation, based on TIG stock I have on hand.)
__________________
-Shawnette the original "everybody get a grip" girl
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2013-03-28, 4:26pm
|
Senior Member
|
|
Join Date: Jun 17, 2009
Location: Bay Area, CA
Posts: 307
|
|
Thanks Shawnette! Guess I don't need to order 10 pounds to make it worthwhile, lol.
|
2013-03-28, 6:44pm
|
Senior Member
|
|
Join Date: May 27, 2008
Location: Albion NY
Posts: 517
|
|
If the ends are stamped you either endup with short mandrels or about a third less.
Some people don't mind the ends, but they can be a little bent on smaller diamiter.
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 4:12am.
|