|
2005-07-19, 10:41pm
|
Bobby
|
|
Join Date: Jul 01, 2005
Location: the US of A
Posts: 131
|
|
small off mandrel leaves
This came about through Nicole.....Janelle and Kari.
What a fun group of glass lovers.
I haven't seen Jiley in a long time and it was wonderful
to be able to see and talk to old glass friends.
While I was giving Jiley a quicky tut I met the most fun three people
and ended up sharing the leaf process that I do with glass.
This is not new to the feild but is the way that I have found to play with
the glass.................and I do so love leaves. I told the girls that I would
send them the tut and since it is now done..............what better place to
share than with the forums that I sooooooooooo lurk ! ! !
What a wonderful day with glass people................WOW..........
O.K. shorter version for a leaf tutorial.
In making the leaves you will be working off mandrel.
Before you start wrap a ss wire around a mandrel with scrap wire.
The scrap wire can go into the kiln with no problem.
I have reused mine more times that I can count.
To Start:
A.......add a ball of glass to a mandrel.
keep the glass at the tip.
B.......Take your tweezers and mash down the center.
keep water handy to cool your tool with.
C.......One one side mash three times.
keep the leaf warm only.
C.......Heat the next side on the edge and mash again.
Flash to keep warm. It doesn't take much.
D.......Rewarm but don't lose the design.
Heat the top just a little and pull the tip out.
This lets the point and the leaves curve.
Play around.....you can make many different shapes.
The fun thing with off mandrel is that you can shape
your leaf and design it forever before you attach it to
the sterling silver wire.
Now:
After you have your leaf the size and shape you want,
heat up the mandrel where the glass is attached and
pull the leaf off with a pair of tweezers. Keep the leaf
warm and pick up the mandrel with the wire on it and
just heat the sterling silver and the glass enough to be
able to slip the ss into the end of the glass leaf. You
may have to do this a few times but the glass and the
sterling silver wire will stick to each other.
After they come out of the kiln I just rub the ss with my
fingers a little and it takes off any of the darkness
from being in the kiln.
1.......Wire wrapped mandrel. The ss wire is slightly
curved around the mandrel so it will not slip
while attaching the hot glass to the hot ss wire.
2.......Leaf right out of the kiln.
I filed down a pair of tweezers to be able to make thin
veins for the small leaves.
Bobby
|
2005-07-19, 10:48pm
|
Bobby
|
|
Join Date: Jul 01, 2005
Location: the US of A
Posts: 131
|
|
OH ! ! !
The reason for the tutorial:
|
2005-07-19, 11:36pm
|
|
needs to light the torch.
|
|
Join Date: Jun 05, 2005
Location: Kula, HI
Posts: 8,180
|
|
WOW!!!
Bobby thank you SOOO much!!!!
What an awesome tutorial!!!!!!
It was great to meet you!!!
I am glad you came out of lurk mode for this!!!
__________________
Nicole Brown, NTP, CGP (Nutritional Therapy Practitioner & Certified GAPS Practitioner) To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2005-07-20, 4:38am
|
Senior Member
|
|
Join Date: Jun 11, 2005
Posts: 793
|
|
WOW! Great technique. Beautiful bracelet. Thanks for sharing.
__________________
Suzanne
'Quantum materiae materietur marmota monax si marmota monas materiam possit materiara?'
|
2005-07-29, 4:22pm
|
|
Senior Member
|
|
Join Date: Jun 16, 2005
Location: Port Townsend, Washington
Posts: 865
|
|
Hey Bobbie, I see you found this forum! How are you guys? Great tutorial. Sheila and Lee
|
2005-07-29, 8:13pm
|
|
Senior Member
|
|
Join Date: Jun 16, 2005
Location: Maple Valley WA
Posts: 7,064
|
|
Very cool and what a great idea. Thank you for sharing.
Beautiful bracelet.
Lara
__________________
Lara
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. ** To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. ** To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Become a fan on Facebook: To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2005-08-16, 1:30pm
|
|
Junior Member
|
|
Join Date: Aug 02, 2005
Location: portland,regon
Posts: 5
|
|
this is an awsome tutorial,but yet i have trouble getting the wire to stick to the glass,maybe my silver wire is to big?hmm? i think it is twenty gauge,anyone have tips for me with this?
|
2005-08-18, 5:48pm
|
|
Senior Member
|
|
Join Date: Jun 16, 2005
Location: Port Townsend, Washington
Posts: 865
|
|
Quote:
Originally Posted by magnum
this is an awsome tutorial,but yet i have trouble getting the wire to stick to the glass,maybe my silver wire is to big?hmm? i think it is twenty gauge,anyone have tips for me with this?
|
You pushing it (inserting) INTO the glass, right? And your wire is slightly heated? Here are of some of mine, I have had the pleasure of Bobbie showing me to do this in my studio! I modified her instructions though and used a leaf masher.
|
2006-09-05, 11:30am
|
|
Senior Member
|
|
Join Date: Aug 12, 2006
Location: Benton Arkansas USA
Posts: 2,167
|
|
Thanks so much. I,m learning something new everyday thanks to people like you. Thanks again Mary Miller
|
2006-09-05, 12:12pm
|
|
Senior Member
|
|
Join Date: Jun 04, 2006
Location: Portland, Or
Posts: 449
|
|
Wow, that makes it sound so easy! Thank you for posting this. I need all the help I can get!
__________________
~Brandy~
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. It's great to be a FLORIDA GATOR! To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2006-09-09, 7:33pm
|
|
Following my Dream
|
|
Join Date: Jun 26, 2006
Location: Pensacola,Florida
Posts: 335
|
|
Just Awesome...Thanks a bunch for posting this !!!
Margie
__________________
Still working on Hothead with bulk tank propane,(so I can buy more glass). Middle name is Patience...lol been torching almost(one week short) one year.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. My name is Margie...and I'm addicted to glass...no...to fire...no...to glass...no... To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2006-09-11, 1:12pm
|
Senior Member
|
|
Join Date: Nov 08, 2005
Posts: 2,907
|
|
Wow! What a great tutorial, and perfect timing!! My pet-sitter wants to trade jewelry for petsitting my yorkie; and she wants a necklace with leaves!!
I was trying to make them on the mandrel and not liking how the hole looked!!
These will work perfectly with how I want to design my necklace. Thank you so much!!!
Mary T.
|
2006-09-11, 2:07pm
|
|
Sandi
|
|
Join Date: Sep 03, 2005
Location: The beautiful mountains of Arkansas
Posts: 371
|
|
Great tutorial....but doesn't sterling wire burn up in the flame?
Thanks,
Sandi
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2006-09-11, 11:31pm
|
Bobby
|
|
Join Date: Jul 01, 2005
Location: the US of A
Posts: 131
|
|
The wire can burn up if you leave it in the flame. I get the glass very hot but not runny and then heat the wire just a little. Not the red glowing look........more like the dark grey look. Work close to the flame with the glass and the wire and it will all come together when the glass is very soft and the wire a dark grey. Sometimes I let a very little ball gather on the wire and then when I add it to the glass there is a little more body to be inside of the leaf. After the leaves come out of the kiln they are a very dark greay and I take a rough cloth and pull up the wire and this seems to clean it and work harden it a little.
Bobby
|
2006-09-11, 11:34pm
|
Bobby
|
|
Join Date: Jul 01, 2005
Location: the US of A
Posts: 131
|
|
Oh ! ! ! In the answering I forgot to thank all of you for looking at the tutorial. I still have fun with the leaves done this way. I too didn't like the look of the hole that the mandrel left and wanted something more delicate for the leaves. Thanks again ! ! !
Bobby
|
2006-09-12, 5:13am
|
|
Sandi
|
|
Join Date: Sep 03, 2005
Location: The beautiful mountains of Arkansas
Posts: 371
|
|
Thanks Bobby...can't wait to give these a try. I have been unhappy with my on mandrel leaves also so this looks like the perfect alternative. Thanks again.
Sandi
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2006-09-16, 1:31pm
|
|
Senior Member
|
|
Join Date: Jun 16, 2005
Location: Port Townsend, Washington
Posts: 865
|
|
Quote:
Originally Posted by Bobby
Oh ! ! ! In the answering I forgot to thank all of you for looking at the tutorial. I still have fun with the leaves done this way. I too didn't like the look of the hole that the mandrel left and wanted something more delicate for the leaves. Thanks again ! ! !
Bobby
|
You've been online!! Where are you guys? Last I heard was Salem and Norm got a job? Contact me and lets get together, you need a coast trip! Sheila
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
_
|
2006-09-21, 4:30am
|
|
used to be Moretti 4REAL!
|
|
Join Date: Sep 19, 2005
Location: Rhode Island
Posts: 209
|
|
Hi Bobby,
I love the idea of poking wire into off mandrel work to use it -- I'm going to adapt that for other off mandrel thingamajigs I try.
Quick "off topic" question - you mention a "Jiley" -- is that a nickname for Janelle? My daughter is a Janelle, and we call her Jelley or J, but I LIKE Jiley for something different.
Cool,
A
|
2006-09-21, 4:14pm
|
KAS Lampwork Beads
|
|
Join Date: Jun 28, 2005
Location: East Liberty, Ohio
Posts: 276
|
|
Thanks Bobby for a great tutorial...I too don't like the look of the hole when leaves are made on a mandrel. Yours are beautiful! What size silver wire did you use? I don't make jewelry so don't have a clue what size or where to buy. Thanks again for taking the time for this tut. Kathleen
|
2006-09-21, 10:48pm
|
Bobby
|
|
Join Date: Jul 01, 2005
Location: the US of A
Posts: 131
|
|
Hello there A
Jiley is a beadfriend that makes wonderful beads.
http://www.jileysstudio.com/
Poking metal into melting glass is fun isn't it. Take pictures when you do.
|
2006-09-21, 10:53pm
|
Bobby
|
|
Join Date: Jul 01, 2005
Location: the US of A
Posts: 131
|
|
KAS
I have used 20g and 18g. Mostly 18g. It depends on how heavy I want the piece to look. I put a very large leaf on 16g and it was o.k.. I buy sterling silver wire from RioGrande but you could get it from most any jewelry supply catalog.
|
2006-09-21, 11:22pm
|
Bobby
|
|
Join Date: Jul 01, 2005
Location: the US of A
Posts: 131
|
|
leaves
If I can remember how to load a pic I can show you a box of leaves that I keep handy. Also a bracelet that I have worn off and on for the last 5 years. It is holding up very well......Enjoy.........
I need to get on here more often.......the how to of "workings" have gotten a little rusty for me.
Bobby
|
2006-09-21, 11:25pm
|
Bobby
|
|
Join Date: Jul 01, 2005
Location: the US of A
Posts: 131
|
|
leaves
O.K. for the box of leaves. I usually make pendants with them. The biggest ones are 2" long.
Bobby
|
2006-09-21, 11:28pm
|
Bobby
|
|
Join Date: Jul 01, 2005
Location: the US of A
Posts: 131
|
|
Well hello there ! ! ! and make sure to say ""HI"" to Adrian......he is a cool guy.
Bobby
|
2006-09-22, 10:17am
|
|
Senior Member
|
|
Join Date: Sep 06, 2005
Location: Washington State
Posts: 564
|
|
What type of SS,Dead soft,HH?
Thanks for the tut,
G.
|
2006-09-22, 11:52am
|
Bobby
|
|
Join Date: Jul 01, 2005
Location: the US of A
Posts: 131
|
|
Hi G
You are very welcome.
Half hard..........I have used dead soft and for me it melted way too early and balled up to soon. It was good for head pins but too soft for the leaves.
Bobby
|
2006-10-01, 8:53am
|
|
Flossy-Flossy
|
|
Join Date: Nov 04, 2005
Location: MARGARITAVILLE
Posts: 884
|
|
Wahoo! How cool!
__________________
~Beth
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2006-10-01, 1:06pm
|
|
Authentic WI Cheesehead
|
|
Join Date: Sep 27, 2005
Location: Grefrath, Germany (30 minutes from Dusseldorf)
Posts: 430
|
|
Great Tut!
Hi Bobby...wonderful tutorial - am definitely going to try it sometime. One question - in picture #1 where the wire is shown on the mandrel, what kind of wire is holding it on, or is all of the wire sterling silver?
As I understand it, the wire stays in place and becomes an embedded headpin?
Thanks! Looks great!
__________________
Gail
|
2006-10-01, 3:21pm
|
Bobby
|
|
Join Date: Jul 01, 2005
Location: the US of A
Posts: 131
|
|
The wire that holds the sterlingsilver wire on is just uncoated wire that I had laying around. You could use any craft wire. I use the same piece over and over. It never gets too hot to burn up. When I take the leaves out of the kiln I take off the craft wire and just have the ss wire attached to the leaf. Head pin style....yes. Then you can pull on the ss wire to harden and straighten it a bit. Some times I pull it through a green scratchy to shine and work harden the wire.
Thanks again for liking the tutorial.
Bobby
|
2006-10-01, 3:35pm
|
Bobby
|
|
Join Date: Jul 01, 2005
Location: the US of A
Posts: 131
|
|
leaves
A few ways I have used the .....headpin style.......sterlingsilver wire.
My image loading window has problems
................gotta go find Norman.
Will have to load them later.
Bobby
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 7:52pm.
|