|
Tips, Techniques, and Questions -- Technical questions or tips |
2010-03-06, 11:25pm
|
Senior Member
|
|
Join Date: Sep 27, 2005
Location: Burnaby, BC Canada
Posts: 419
|
|
Major Kiln Problem! HEEEEELLLLLLPPPPP!
Hi
I have the "84BD Aim Kiln" with the "Fuji PXR3 digital controller". I usually just turn my kiln on and when it reaches the set value temp, I staert crafting beads and put them directly into the kiln. When the last bead is done I set the kiln to the annealing sequence and I'm done.
Well I turned my kiln on and waited for it to reach the set temp. It didn't do this. in fact it was still room tempeture! I tried for a couple days to get it to heat up but no joy. I thought I had messed up the annealing sequence? So I tried to reprogram it many times still it would not heat up. I checked the elements, but they seem okay.
I bought this kiln from Aim 3 years ago and because of major health reasons I have used the kiln maybe 20 times. Any ideas anyone.
Thanks for any help in advanced.
penny5658
__________________
A Girl Can Never Have TOO Much Glass!
|
2010-03-06, 11:36pm
|
Senior Member
|
|
Join Date: Jun 05, 2005
Location: Clackamas, Oregon
Posts: 623
|
|
Does it have a fuse? My Skutt has a fuse to change!
|
2010-03-06, 11:53pm
|
|
Ass-kicking Cephalopod
|
|
Join Date: Jun 19, 2006
Location: Duh, Squidville
Posts: 9,523
|
|
Might be the relay too - do you hear a clicking noise?
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
DOG is my co-pilot
Cricket w/two 5 lpm oxycons - and sometimes a Minor.
|
2010-03-07, 12:49am
|
|
To Bead Or Not To Bead
|
|
Join Date: Jun 15, 2005
Location: Livonia, Michigan
Posts: 2,089
|
|
Sounds like you need to replace the relay like Skid is suggesting. I've had to do this a couple of times with my Jen Ken.
__________________
Etsy: To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Ebay: To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2010-03-07, 2:43am
|
|
one day at a time
|
|
Join Date: Jun 27, 2005
Location: We are MOVING!!!
Posts: 8,319
|
|
Wow! I have been using my Paragon for 7 years full time and never had to replace anything...yet!
(knock on wood)
Crap, I just jinked myself I'll bet!
__________________
You live in a world of money. Money means choices. No money, no choices. Welcome to reality.
Melody (Marlee Matlin) from Switched at Birth
|
2010-03-07, 8:28am
|
|
Senior Member
|
|
Join Date: Jun 19, 2005
Location: Elk, WA, "The Last Chance Ranch"
Posts: 1,945
|
|
the relay... they are relatively cheap...
__________________
Kay "LAG"
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2010-03-07, 9:02am
|
|
honorary bead lady
|
|
Join Date: Jan 14, 2008
Location: Mostly the doghouse
Posts: 5,180
|
|
When you buy the replacement, buy a couple!
__________________
David To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2010-03-07, 9:25am
|
|
Ass-kicking Cephalopod
|
|
Join Date: Jun 19, 2006
Location: Duh, Squidville
Posts: 9,523
|
|
yes - and get them from an electrical supply company - take the old one out and get the number from it. they are readily available and way cheaper that way.
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
DOG is my co-pilot
Cricket w/two 5 lpm oxycons - and sometimes a Minor.
|
2010-03-07, 3:28pm
|
|
To Bead Or Not To Bead
|
|
Join Date: Jun 15, 2005
Location: Livonia, Michigan
Posts: 2,089
|
|
Thanks Squid. I never even thought of getting the relay from an electrical supply company.
__________________
Etsy: To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Ebay: To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2010-03-07, 3:40pm
|
|
Ass-kicking Cephalopod
|
|
Join Date: Jun 19, 2006
Location: Duh, Squidville
Posts: 9,523
|
|
you're welcome - I bought 4 when I got mine and it was less than $20 for all of them
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
DOG is my co-pilot
Cricket w/two 5 lpm oxycons - and sometimes a Minor.
|
2010-03-07, 9:46pm
|
|
To Bead Or Not To Bead
|
|
Join Date: Jun 15, 2005
Location: Livonia, Michigan
Posts: 2,089
|
|
I think I'll start looking around for some. My Jen Ken blows the relay every few years. It would be nice to have some on hand.
__________________
Etsy: To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Ebay: To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2010-03-07, 11:59pm
|
a pox upon an idiot :..
|
|
Join Date: Jul 01, 2005
Location: in the real world...
Posts: 1,298
|
|
I agree with buying several relays, it's like an insurance policy and I was able to send several out to people who weren't able to find them for their Fuseboxll kilns.
At first I ordered them online from an electrical company but found out I could just print out the picture and take it to a Graninger locally. You just walk in, hand them the printed picture and you don't even have to explain what you need it for! LOL
|
2010-03-08, 4:44am
|
|
BeadsonCypress
|
|
Join Date: Jan 05, 2007
Location: Jersey Shore - by AC
Posts: 2,662
|
|
When I was having issues with my AIM the "new guy" who took them over is great at helping diagnose and solve any issue you might have. There are a couple of threads that have his link...
__________________
Beads on Cypress (Susan Boyce)
7+ years and growing - Mini-CC and O2 generator
|
2010-03-08, 10:04am
|
|
KILN BUILDIN FOOL
|
|
Join Date: Jun 14, 2005
Location: OREGON COAST
Posts: 1,738
|
|
If the relay clicks when you turn the kiln on, its not the relay, make sure your set point is set at like 925 if its at room temp it the kiln wont heat up.
If the relay clicks on and the set point is set to 925 then either a wire is loose or burnt or the element is bad.
Mike
__________________
NEED A GOOD KILN ? CALL ME 541-961-6978
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
When you tell lie's about someone, well you get what you get. To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2010-03-09, 10:28pm
|
Senior Member
|
|
Join Date: Sep 27, 2005
Location: Burnaby, BC Canada
Posts: 419
|
|
Kiln Help
Hey Everybody
Thanks for the suggestions. You guys are so much help to people, you are all awesome!
When I turn the kiln on it does not make that clicking noise. It used to make that noise once it reached the set value. I think you are right about it being the relay. I didn't think about it but I went and got the paperwork that came with the kiln and there's is an 800 number. So I will call Aim tommorow. But I beleive you guys are right. What I don't understand is I really haven't used it that much! I feel it should last alot longer than it did. Like I said I only used the kiln maybe 20 times.
Thanks again
penny5658
__________________
A Girl Can Never Have TOO Much Glass!
|
2010-10-09, 4:15pm
|
Senior Member
|
|
Join Date: Sep 27, 2005
Location: Burnaby, BC Canada
Posts: 419
|
|
Kiln Problems
Hi
This is an update on my kiln.
I purchased a new relay and installed it and the kiln still does not work!
I phoned AIM kilns and spoke with Susan and she sent me a relay but the kiln still won't work!!!!!!!!
Does anyone have any other ideas.
I've spent just around 100 dollars and I'm ready to pull my hair out! Any help will be greatly appreciated.
Thanks
Penny
__________________
A Girl Can Never Have TOO Much Glass!
|
2010-10-09, 4:20pm
|
|
"Sinners have soul too"
|
|
Join Date: Jun 26, 2005
Location: The beachy part of So Cal
Posts: 4,258
|
|
Oh my... you've gone 7 months with no kiln? I'd be bummed.
Have you tried replacing the element?
__________________
Donna
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. * To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. * To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. *
|
2010-10-09, 8:01pm
|
Senior Member
|
|
Join Date: Sep 27, 2005
Location: Burnaby, BC Canada
Posts: 419
|
|
Kiln Problems
Hi
Not knowing about kilns, my DH replaced the elements for me, so that's not it.
I'm just beside myself. I've made some beads just to practise but they usually crack cause no prper way to anneal them.
Penny
__________________
A Girl Can Never Have TOO Much Glass!
|
2010-10-09, 8:04pm
|
|
http://youtu.be/nGt9jAkWi
|
|
Join Date: Oct 23, 2005
Location: Cullman, Alabama
Posts: 2,838
|
|
Penny, I'm thinking the AIM folks should be helping you troubleshoot the problem better. I have 2 JenKen kilns & always get help when something goes wrong. They always walk me though things to figure out what's wrong. Stay on the phone with them longer & make them help you figure out the problem. Maybe you can send the relay back for a refund?
__________________
Vivian
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. - To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2010-10-09, 8:06pm
|
|
"Sinners have soul too"
|
|
Join Date: Jun 26, 2005
Location: The beachy part of So Cal
Posts: 4,258
|
|
I would look for someone who can repair it... is there a glass shop or ceramic studio near you? If there is then maybe you can call and see if they can repair it or refer you to someone who can.
__________________
Donna
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. * To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. * To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. *
|
2010-10-09, 8:13pm
|
|
And silence is golden
|
|
Join Date: Oct 05, 2005
Location: The Shrimp Shack
Posts: 3,230
|
|
Quote:
Originally Posted by GLASSFREEK
If the relay clicks when you turn the kiln on, its not the relay, make sure your set point is set at like 925 if its at room temp it the kiln wont heat up.
If the relay clicks on and the set point is set to 925 then either a wire is loose or burnt or the element is bad.
Mike
|
Did you check all wires like Mike suggests?
__________________
~The Mango Queen~
|
2010-10-10, 12:22am
|
Senior Member
|
|
Join Date: Sep 27, 2005
Location: Burnaby, BC Canada
Posts: 419
|
|
Kiln Problems
Hi
Eveything has been checked 100 times over! I am so sick of looking at this kiln I am ready to just chuck it out the window ggggggrrrrrrrrrrr!
Anyways my husband has been helping me too. He has checked everything possible. I have tried to find someone like ceramics studios. There is one glass shop in the city and one out in the suburbs,but they couldn't help me. The only option I see now is to phone AIM kilns after the long weekend(it's our Thanksgiving on Monday. So I guess Tuesday I'll call. I wish I could find someone to batch anneal. I guess I will look a little harder at that till I can get my kiln working. And if anyone has any other ideas feel free and post.
Thanks everyone
Penny
__________________
A Girl Can Never Have TOO Much Glass!
|
2010-10-10, 9:41am
|
|
KILN BUILDIN FOOL
|
|
Join Date: Jun 14, 2005
Location: OREGON COAST
Posts: 1,738
|
|
Its the element, look for a little burn spot.
I you cant get one from aim give us a call.
Mike
__________________
NEED A GOOD KILN ? CALL ME 541-961-6978
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
When you tell lie's about someone, well you get what you get. To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2010-10-10, 7:21pm
|
Senior Member
|
|
Join Date: Sep 27, 2005
Location: Burnaby, BC Canada
Posts: 419
|
|
Kiln Problems
Hi
Why thank you for the offer Mike. It is appreciated. Could a burn in the element be small, what am I looking for?
If I get no satisfaction from AIM I will definitly contact you.
I just checked out your website. You've got some awesome looking kilns! Maybe you could pm me on payment plans on your 2 least expensive kilns. Thanks
Penny
__________________
A Girl Can Never Have TOO Much Glass!
|
2010-10-11, 9:39am
|
|
KILN BUILDIN FOOL
|
|
Join Date: Jun 14, 2005
Location: OREGON COAST
Posts: 1,738
|
|
it will be just a little burn spot, you should be able to see a split in the element.
Mike
__________________
NEED A GOOD KILN ? CALL ME 541-961-6978
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
When you tell lie's about someone, well you get what you get. To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2010-10-17, 6:16pm
|
Senior Member
|
|
Join Date: Sep 27, 2005
Location: Burnaby, BC Canada
Posts: 419
|
|
Kiln Problems
Hi
Another update, I spoke to Susan at AIM kilns and she is sending me new wires that hook up to the relay. These wires are covered so you can't see if they are burned.
My DH and me checked the elements again with a magnifying glass. There are no burns on the elements. So maybe the new wires will be the problem. Wish me luck!
I will update once the new wires get here.
I keep updating cause if someone else is having similer issues it might help. But I hope no one does cause it's a pain in the butt!
Signing Off For Now
Penny
__________________
A Girl Can Never Have TOO Much Glass!
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 12:37am.
|