|
Safety -- Make sure you are safe! |
![Old](lwe/statusicon/post_old.gif)
2005-06-29, 4:48pm
|
![Chelle's Avatar](image.php?s=77fa62efa5929ebf7756a1eaf9f6739b&u=23&dateline=1234259736) |
My gang!!
|
|
Join Date: Jun 05, 2005
Location: Talladega, AL
Posts: 3,259
|
|
gas mist from HH
I have had a problem with getting a gas mist coming from my HH. I am on bulk MAPP and this has been happening ever since I have connected it.
It comes out in little puffs, and at some point in the pause I can light it. Then I have the fire breathing dragons breath and it will burn off after a while. However I am getting sooty beads from this even after the flame is steady.
I do burn off my gas after turning off the tank. I also leave the torch on until not just the flame is gone, but the hiss also.
Any advice is appreciated.
|
![Old](lwe/statusicon/post_old.gif)
2005-06-29, 4:54pm
|
![dogmaw's Avatar](image.php?s=77fa62efa5929ebf7756a1eaf9f6739b&u=29&dateline=1236434503) |
Satake Woman!
|
|
Join Date: Jun 05, 2005
Location: South Carolina
Posts: 4,949
|
|
Chelle, I am clueless. I hope someone can help tho, cause I know how much you are looking forward to torching!
__________________
Jo
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Satake glass in stock and ready for you!
|
![Old](lwe/statusicon/post_old.gif)
2005-06-29, 5:14pm
|
![Chelle's Avatar](image.php?s=77fa62efa5929ebf7756a1eaf9f6739b&u=23&dateline=1234259736) |
My gang!!
|
|
Join Date: Jun 05, 2005
Location: Talladega, AL
Posts: 3,259
|
|
Thanks sweetie. It is driving me crazy!!
|
![Old](lwe/statusicon/post_old.gif)
2005-06-29, 5:31pm
|
Senior Member
|
|
Join Date: Jun 10, 2005
Posts: 342
|
|
Hi Chelle,
Have you tried draining your hose? Is the tank newly filled? There are so many different things that can be the problem but those are the first 2 I can think of. Then the third would be cleaning the torch itself.
Good luck!
Charlene
__________________
Charlene
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
![Old](lwe/statusicon/post_old.gif)
2005-06-29, 5:57pm
|
![Chelle's Avatar](image.php?s=77fa62efa5929ebf7756a1eaf9f6739b&u=23&dateline=1234259736) |
My gang!!
|
|
Join Date: Jun 05, 2005
Location: Talladega, AL
Posts: 3,259
|
|
Thanks Charlene. The tank is well, I've had it since Sept or Oct, and it been sitting as I haven't been able to torch. But I had problems when I first got it too. I've probably spent 5 hours on this tank. That's with a new hose, so maybe it is gunk in the line.
I'll see if my dad can help me drain the hose. It is too tight for me to disconnect.
It's a pretty new torch also. Only about 15 hours use on it.
|
![Old](lwe/statusicon/post_old.gif)
2005-07-23, 4:53pm
|
Ecclectic & Eccentric
|
|
Join Date: Jul 06, 2005
Posts: 178
|
|
Hey Chelle, how'd you go? Did it resolve itself? Did Dad fix it?
My first thought was dirty gas - just in case nothing else worked...
Cheers!
Lavender
|
![Old](lwe/statusicon/post_old.gif)
2005-07-23, 6:02pm
|
![Chelle's Avatar](image.php?s=77fa62efa5929ebf7756a1eaf9f6739b&u=23&dateline=1234259736) |
My gang!!
|
|
Join Date: Jun 05, 2005
Location: Talladega, AL
Posts: 3,259
|
|
Nope, it isn't fixed. It's not the hose or the torch, so it has to be the gas. So I'm back on the 1lb cannisters until after the Gathering when I should be able to get the tank purged and refilled.
Thanks for asking.
|
![Old](lwe/statusicon/post_old.gif)
2005-07-24, 8:40am
|
![Dale M.'s Avatar](image.php?s=77fa62efa5929ebf7756a1eaf9f6739b&u=101&dateline=1301248129) |
Gentleman of Leisure
|
|
Join Date: Jun 10, 2005
Location: A Little Bit West of Yosemite Valley
Posts: 5,200
|
|
Knowing the design construction of a propane tank (MAPP) and the way fuel is drawn off the top of the tank as a vapor and not off bottom of tank as a liquid, I fail to see how you are getting a mist of gas out of your torch, unless you are turning torch on way to much when trying to light it... The only possible thing is that you have a problem of either the vapor recondensing in your hose, or there is a condensation problem with odorant. If you have had a problem with this tank of fuel all along, I suspect there is something wrong with fuel mixture in tank.... Only possible problem may be to much odorant (oil) in mix... Ask supplier of tank/fuel if you can exchange it for a different one and see if that makes a difference.
Dale
__________________
You can lead a person to knowledge, but you can't make them think. To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Vendor-Artist-Studio-Teacher Registry To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
San Francisco - A Few Toys Short of a Happy Meal
|
![Old](lwe/statusicon/post_old.gif)
2005-07-24, 1:15pm
|
![Chelle's Avatar](image.php?s=77fa62efa5929ebf7756a1eaf9f6739b&u=23&dateline=1234259736) |
My gang!!
|
|
Join Date: Jun 05, 2005
Location: Talladega, AL
Posts: 3,259
|
|
Thanks Dale.
|
![Old](lwe/statusicon/post_old.gif)
2005-08-10, 9:01pm
|
![Melinda's Avatar](image.php?s=77fa62efa5929ebf7756a1eaf9f6739b&u=600&dateline=1386915504) |
Senior Member
|
|
Join Date: Jul 03, 2005
Posts: 1,186
|
|
Is this tank in the hot sun?? If so, the Mapp in a nearly full tank can expand in a hot tank and cause liquid fuel spitting and sputtering instead of a nice flow of vapor. This can also happen with an overfull tank. With only 5 hours on an overfull tank, it is a likely culprit.
Get that tank in the shade, drain hose and ask your fuel man not to fill the tank so full. I had this problem ALOT when I used Mapp and always in the hot summer months. Never a problem in winter.
|
![Old](lwe/statusicon/post_old.gif)
2005-08-11, 12:06am
|
![Chelle's Avatar](image.php?s=77fa62efa5929ebf7756a1eaf9f6739b&u=23&dateline=1234259736) |
My gang!!
|
|
Join Date: Jun 05, 2005
Location: Talladega, AL
Posts: 3,259
|
|
Thanks Melinda.
I figure that is the culprit, the heat. So my dad is going to build a little brick shelter for it, but until then I am on the 1 lb cannisters again.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 5:41pm.
|