Lampwork Etc.
 
Send a PM to CorriDawn!

LE Live Chat

Enter Live Chat

No users in chat


The Flow

Glacial Art Glass


 

Go Back   Lampwork Etc. > Library > Tips, Techniques, and Questions

Tips, Techniques, and Questions -- Technical questions or tips

Reply
 
Thread Tools
  #1  
Old 2017-06-19, 11:22am
pswrd pswrd is offline
Member
 
Join Date: Jun 16, 2016
Posts: 32
Default Trick to have release in the middle of mandrel without coating all the way to the end

Is there a trick to just have bead release coating the middle of a mandrel without having to dip most of the mandrel and then wiping off the end? So far, I have not come up with a clever mess free way...
Reply With Quote
  #2  
Old 2017-06-19, 11:38am
Speedslug's Avatar
Speedslug Speedslug is offline
Phill
 
Join Date: Mar 21, 2009
Location: Winnebago, MN
Posts: 1,651
Default

I have heard some say the trick is to use a wide spatula with bead release dipped in an open mouth container.

Getting a smooth, even layer would be hard for me free handed so I would likely brace one end of the mandrel on something and probably my spatula hand as well.



Others just go for the long, tall bottle and wipe the end off with their fingers.

It's not all that messy, especially if you have a second open mouth container to wipe the excess off your fingers on the edge.

I would find cleaning the excess off the spatula more troublesome than my fingers.


Good luck and let us know what works for you.

I have just learned to switch hands with the one clean end but I also have an electric mandrel spinner and so my hands don't tire of doing the same motion for twenty minutes while pretend to be an artist with molten glass.
__________________
So, What Do We Do Now?
Reply With Quote
  #3  
Old 2017-06-19, 12:31pm
Pat's Avatar
Pat Pat is offline
Senior Member
 
Join Date: Jun 22, 2005
Location: west of Atlanta, Georgia
Posts: 5,299
Default

Just use a jar lid like mayo, cleaned. pour in the release and it's easy to do the mandrel in the center.
Reply With Quote
  #4  
Old 2017-06-19, 2:43pm
Tillie's Avatar
Tillie Tillie is offline
Miata and Sunshine! Yay!
 
Join Date: Aug 19, 2007
Location: Lower left coast of FL
Posts: 1,559
Default

I use a large plastic lid and clip a notch out of each side directly across from each other, pour a small amount (up to the bottom of the notch) of release onto the lid and put your mandrel into the notches and roll it in the release. No messy hands and you can pour the remainder back into the bottle by cupping the plastic a little.
__________________
I have enough money to last me for the rest of my life.....unless I buy something.
PURPLE Cricket on Bulk propane and a 5lpm oxycon waaaay high up in the mountains of SW Florida
http://www.picturetrail.com/homepage/hummingbirdhillsg
Contributing member of the EPIC FLOUNCE thread 2013
Proud member of YOU PEOPLE thread.
Reply With Quote
  #5  
Old 2017-06-19, 4:37pm
DarleenMB's Avatar
DarleenMB DarleenMB is offline
Senior Member
 
Join Date: Sep 18, 2005
Location: Wyoming
Posts: 1,980
Default

Huh. I'da just dipped it as far as I could then used my fingers to wipe off the excess on the opposite end. But I'm lazy that way.
__________________
Darleen

My website

Etsy
Reply With Quote
  #6  
Old 2017-06-19, 4:49pm
FosterFire's Avatar
FosterFire FosterFire is offline
SCIENCE Teacher!
 
Join Date: Jul 19, 2005
Location: Wylie, TX
Posts: 2,031
Default

I deep dip all my mandrels with the release. I have some nerve damage in my hands and I can feel the bead release coated end better than the non-coated end. On hand problem days this means I rarely ever drop the mandrel.
__________________


Last edited by FosterFire; 2017-06-21 at 5:38pm.
Reply With Quote
  #7  
Old 2017-06-20, 7:07pm
Jeri Jeri is offline
Senior Member
 
Join Date: Sep 13, 2005
Location: New Jersey
Posts: 798
Default

Use a foil loaf pan. In the center of each side cut a slot almost the depth of the pan. Put release in pan to bottom edge of slots. Mandrel goes in to slots with pan in center of mandrel. Roll the mandrel in the release and refill frequently.
__________________
www.jeriwarhaftig.com
New website and Puffy Mandrels back in stock!
Reply With Quote
  #8  
Old 2017-06-21, 12:56pm
Bentley Bentley is offline
Junior Member
 
Join Date: Sep 11, 2016
Location: Vancouver WA
Posts: 29
Default

I put the mandrel horizontally across the bead release jar opening and use a tablespoon to drip in onto the middle of the mandrel while rotating the mandrel. The run off falls back into the jar. Easy.
Reply With Quote
Reply

Tags
bead release


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump




All times are GMT -7. The time now is 1:48am.


Powered by vBulletin® Version 3.7.5
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Your IP: 54.92.178.105