Thank you Joe!

[Elegance_1]

I received a package of glass boro stix from Joe of GlowGlass.com and what a nice surprise to find two glow stix inside.
To view links or images in this forum your post count must be 1 or greater. You currently have 0 posts.
Thank you so much. I can't wait to get behind my torch and try it out. Any tips on working with glow stix? do they need to be encased first?

[Glow Joe]

Aw Shucks Barbara
To view links or images in this forum your post count must be 1 or greater. You currently have 0 posts.
!

My pleasure!!! Anytime!

Best advice I've heard so far is work em soft like dichro.....you do not have to encase the stix....they are good to go as is.
Although...it has been found (since EVERY particle of glass has glow on it....even the ones in the MIDDLE of the stick)...if you do choose to coat a ten mil rod with glow and then pull it out......you'll make a little bit go a long, long way.

Create a beautiful day!

Originally Posted by Elegance_1
To view links or images in this forum your post count must be 1 or greater. You currently have 0 posts.

I received a package of glass boro stix from Joe of GlowGlass.com and what a nice surprise to find two glow stix inside.
To view links or images in this forum your post count must be 1 or greater. You currently have 0 posts.
Thank you so much. I can't wait to get behind my torch and try it out. Any tips on working with glow stix? do they need to be encased first?

[Elegance_1]

Yes, you've mentioned that before about the glow stix. I didn't remember that part but I don't think I'll forget now that I actually have some. Have a great weekend!!

[Glow Joe]

THANKS.....You too Barbara!!!!!


To view links or images in this forum your post count must be 1 or greater. You currently have 0 posts.