- No room for squirrel cage
- Got a free hood...
- Make up air from basement?
- Questions and pics for Mike...
- Ventilation questions
- The last step to my Vent system please help
- The ventilation system at BeadFest
- venting into existing chimney stack possible?
- Venting for using Enamels
- Why do some vent systems have sides?
- My "vent guy" is coming...
- Propane tank in the garage?
- Is 950 cfm to much?
- anybody else get "sunburned"...
- variable speed fan control
- Yet another question about torching in the garage
- Wiring/Rewiring??
- Help from burning hands on kiln door?
- Vent into attic?
- plumbing the propane
- placards needed?
- propane in trash can okay?
- Vent and intake air question
- Rusty Mapp Gas
- Piping propane into trailer/ventilation
- Adding an extra Fan to a Glasscraft hood?
- Connection Leak
- Mike and Dale - Thanks
- are warnings really necessary?
- Mike? Dale? Anyone know a lot about NG?
- Ventilation question (what else?!)
- Venting question for Mike or Dale
- Max free air CFM of 12in round duct
- ACE filters for soft glass eyewear... are they all safe?
- vent questions imagine that
- storing propane outside
- couple of vent questions-dist. from duct to fresh intake?
- Bad Air Day?
- House propane on Hothead...
- Woke with a Headache...
- Portable Ventilation Question
- The Story of the Big Bad Burns
- Is this okay?
- Eye Protection question for boro
- Help with Ventilation
- My eyes! My eyes!
- Vent and make up air
- CFM and ventilation
- incoming ductwork size??
- Need Suggestions and Thoughts...Studio Set-up
- Pipe size for propane?
- MAPP Gas...Where do you store yours...
- Vent/Hood Installation Questions
- How do I connect my NG line to my red/green hose?
- Ventilation: My temp. situation - ok?
- ventilation installed but nothing but problems
- Ventilation
- Can you recommend a blower?
- Question about make up air
- The cost of my NG line & hood install
- Is this a bad idea?
- Need advice about venting...
- CFM?
- BBQ tanks and cold
- Multiple questions... NG vs. Propane, venting... etc.
- Studios with smoke alarms?
- What are the settings for my Propane tank & oxycon?
- Anybody seen MythBusters
- Better to vent upwards? or downwards?
- Working glass in Florida heat??
- Setting up new studio
- Make up air question
- Oxy Con Question
- Damn cats.....
- I've taken ventilation info from here and it just doesn't work unless
- N 95 respirator
- ? about MAPP gas
- Gold and silver foils...
- is my fan big enough?
- Hose life?
- ventilation hoods
- N100 respirator...how long...
- Where can I get 10 inch duct work??
- Concentrator questions
- do I have to use 10" duct
- Using outside propane
- fiber blanket
- Making me crazy
- ventilation for a newbie
- What could cause fainting/dizzyness?
- Questions about my setup
- pics of studio... need advice
- hood distance from torch
- Sizing of vent box and work area
- Fuel plumbing for multiple workstations
- set-up help
- Venting needed for kiln?
- What is your favorite eye protection??
- Drilling holes in marble
- Drilling holes in marble
- I just can't find it again
- side wall materials
- Can you ever use a range hood?
- Running Electricity
- Fresh Air Intake
- Venting Multiple stations
- Turning Propane On/Off
- Just double checking
- Cool new torch lighting tool!!
- Mike/Dale is this ok? Ventilation question.
- ACK! HELP!
- Massachusetts and Natural Gas
- AGA approved torch
- ventilation & flexible ducting
- Yet another ventilation thread.......
- Fire prevention in the studio
- propane on 2nd floor
- vent hood wiring/electrical question
- * * * Ventilations Advice Needed * * *
- O2 concentrator specs?
- Need picture of propane tank with regulator
- Welding glasses question
- I am so LOST
- Question about upgrading to an Oxycon
- hose question
- Ventilation-Getting closer...maybe
- temporary ventilation
- Quality of hoses and regulator?
- Gas line question.
- attaching the blower
- Ventilation for Two
- Where To Purchase Vent Hood?
- Running a propane line question
- Must I ventilate for fusing?
- Ventilation Qs
- Lampworking safe when pregnant?
- Lead in glass..Lead in Bead?
- Ventilation question
- ventilation help for an aussie
- Box in my Workbench
- question about didymium lenses
- Confused about Silver
- Mapp Gas: Is it hazardous to health
- propane distance from torch
- Propylene tank
- Change in plans, new questions
- Ventilation for Eight
- Oh YEAH, Ventilations system DONE! W/Pictures :)
- I just can't figure out Ventilation at all
- Respirator for Silver Glass?
- Q re: hook ups
- ventilation for a big torch
- Help! My propane regulator is frozen!
- make-up air question
- Another propane/house explosion
- QUESTION about in-line vent fans
- flashback arrestors
- Replacement Air Question
- sigh...questions...
- Questions: Ventilation & Safety Glasses
- Fighting the summer heat...
- ventilation diagrams
- shop set up / ventilation
- Vent Hood Size
- NO2 smell
- Blower Motor Location
- exhaust duct
- Anyone know where I can by
- protecting canisters from lightning
- Ventilation Set Up
- Ventilation
- Flooded with info-help!
- Regulator Pulsating
- Switching to Natural Gas
- help with temporary ventilation
- Propane flareing
- Propane shelf life
- Exhaust fan help
- Yet another possible propane explosion
- Ventilation fan question
- Pregnant! YAY! Does anyone know what metals are in Effetre colors?
- Glasscraft hood with exhaust fan for Lynx setup
- eye-operation and Glassblowing
- Price For NG Line
- Problem: regulator or flashback arrestor?
- I got burned... and some safety questions
- please help with ventilation
- Our Ventilation (in progress)
- My Peepers are getting dried out
- power of a torch
- NG and a Mirage?
- Question about the positioning
- Propane Regulator question
- Need help, my propane is indoors
- Y connector coming from Propane tank
- Something not to do!
- Another Make up Air Question please!
- Do I need better eye protection?
- Mounting Duct to Blower
- Gas monitors/detectors and respirators
- Is my fan too big?
- Where do I get a wire and instructions to clean my Mini CC?
- Natural Gas lines
- My experience w/ bad ventilation
- I need tips about ventilation systems!!!
- complicated ventillation question
- Newbie - Is torching outside safe?
- Make up Air
- Blower question - What do these numbers mean?
- Propane gauges
- Paragon BlueBird Kiln
- Has anyone purchased a blower here?
- AUR-92 Shield
- Sell me glasses! (sorry double posting)
- eye protection for hot heads
- Check your ventilation ducts regularly...
- Don't Grab The Hot Bead!
- Setting up my first studio, ? about ventilation
- ACE 202 Cyclone Glasses
- Hot Head Boro Glasses?
- what happens when you play with fire...
- Rust on Mapp bottle threads
- Bird Safety
- Ventilation Done, What Do You Think?
- Belaboring the Venitlation Issue (SORRY!)
- Feeling confused.......
- Frantz Art glass Ventilation system
- which safetyglasses?
- Calling All Electricity Gurus
- Exhaust Help
- Lampworking + Woodturning = yes or no?
- hose question
- ventilation
- Start Torching After A Long Time - Safety Steps?
- Quick question on tubing (and i mean real quick!)
- Greenhouse for studio?
- Kiln help please
- Setting Up New Studio on a Dime
- Do I need ventilation for my kiln?
- blower
- ducting into attic?
- anything wrong with this?
- Safety Bibliography - Please help!
- How to correctly install a vent in the side of a garage?
- Insurance question?
- make up air question, please help!
- If you decided you are going to use Flash-back arrestors...
- Temporary Ventilation Setup
- I am just wondering about natural gas v. propane
- Hood for Furnce & Glory hole